• Journal of Industrial Convergence
• /
• v.16 no.2
• /
• pp.33-39
• /
• 2018

This paper describes the design method of the linear PID controller and proposed the design method in the future. The first PID design method is to ensure phase margin and gain margin. This method guarantees stability by designing in the frequency domain. The second method is an internal model control method. This method is to design the PID controller using the parameters of the internal model after identifying the internal model for the control model. Therefore, this method has a strong disturbance characteristic. Finally, a proposed Cascade and smith-Predictor controller. The combination of the cascade controller and the smith-predator of this method is a controller structure that has two advantages: robust control and optimal control. This method can obtain the performance evaluation index as the optimal controller design method. This PID controller design method becomes the basis of the nonlinear method and is being continuously studied.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1676-1679
• /
• 2007

In control of the time delay systems, if the disturbance information can be estimated exactly, the ideal response for the disturbance can be achieved. Therefore, in this paper, a new adaptive disturbance observer for the time delay system control is proposed. The disturbance observer is designed and adaptive laws for adjusting the observer are proposed. The new Smith predictor controller to eliminate the effects of the disturbance can be achieved by adding an estimated disturbance to the Smith model. The improved performances of the proposed system and the adaptive disturbance observer are verified by computer simulation.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1687-1688
• /
• 2008

The steam superheater and the steam pressure systems are time delay systems that have poles near the origin in the left half plane or a pure integrator. Smith predictor can't be applied to these systems any more, because of occurring the steady state error for the step disturbance. In this paper, a new Smith predictor controller for the steam superheater and the steam pressure is proposed. A disturbance observer to estimate an input disturbance and a new controller to eliminate an effect of a disturbance are proposed. The computer simulation results are shown the efficiency of the proposed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.10
• /
• pp.1023-1029
• /
• 2014

In this paper, we propose an SPDR (Smith Predictor for Disturbance Reduction) scheme to improve the temperature control by reduction of the disturbance in ROT process with measurement delay. The proposed controller is a combination of Astrom's modified Smith predictor with a disturbance reduction controller and a grey predictor. The grey prediction is used to calculate the inverse of the measurement delay and to predict future variations and tendencies of system output. The simulation results demonstrate the successful performance of the proposed disturbance reduction controller and enhance the robustness of the proposed control scheme.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1025-1030
• /
• 2009

It is known that the classical tuning formula for typical PID controllers in general provides unsatisfactory results for industrial plants where the time delay exceeds the dominant lag time. For this reason, alternative strategies have been studied in order to cope with this problem and the most popular scheme is the Smith Predictor(SP). In this paper, the dynamic model of a unit apartment in the district heating system, which is the control process effected by the dead-time, is developed, and the on/off room temperature control method with the SP simulate using Matlab-Simulink. The simulation results show that the SP works effectively in outdoor temperature variation.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.186-193
• /
• 2008

The Internet's low cost and ubiquity present an attractive option for real-time distributed control of processes on the factory floor. When integrated with the Internet, the LonWorks open control network can give ubiquitous accessibility with the distributed control nature of information on the factory floor. One of the most important points in real-time distributed control of processes is timely response. There are many processes on the factory floor that require timely response. However, the uncertain time delay inherent in the network makes it difficult to guarantee timely response in many cases. Especially, the transmission characteristics of the LonWorks/IP network show a highly stochastic nature. Therefore, the time delay problem has to be resolved to achieve high performance and quality of the real-time distributed control of the process in the LonWorks/IP Virtual Device Network (VDN). It should be properly predicted and compensated. In this paper, a new distributed control scheme that can compensate for the effects of the time delay in the network is proposed. It is based on the PID controller augmented with the Smith predictor and disturbance observer. Designing methods for output feedback filter and disturbance observer are also proposed. Tracking position control experiment of a geared DC Servo motor is performed using the proposed control method. The performance of the proposed controller is compared with that of the Internal Model Controller (IMC) with the Smith predictor. The result shows that the performance is improved and guaranteed by augmenting a PID controller with both the Smith predictor and disturbance observer under the stochastic time delay in the LonWorks/IP VDN.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.25-32
• /
• 2007

In this paper, a new method for first order plus dead time(FOPDT) model identification is proposed, which can identity multiple points on a process step response in terms of classification of time response. The process input and output to the test are decomposed into the transient part and the steady-state part. The steady-state part express one FOPDT model and the transient part express variously FOPDT model using least square estimation method. The optimum parameter tuning algorithm for PID controller of the Smith Predictor is proposed through ITAE as performance index. The Simulation results show the validity and improvement of performance for various processes.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.36-40
• /
• 2009

In control of time delay systems, if the informations about the system model and the disturbance can be estimated exactly, the ideal response can be achieved by using Smith predictor controller. Therefore, in this paper, an adaptive algorithm is proposed to control time delay systems existing modelling errors and disturbance. An adaptive observer to estimate disturbance and system model is designed and adaptive laws adjusting the observer are proposed. The new Smith predictor controller is designed using the proposed adaptive observer. As a result, the proposed controller can eliminate the effects of the disturbance and the modelling error. The effectiveness and the improved performance of the proposed system are verified by computer simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1294-1297
• /
• 2003

With the development of medical field, many kinds of operations have been performed on human articulation. Arthroscopic surgery, which has Irrigation Pumping System for security of operator vision and washing spaces of operation, has been used for more merits than others. In this paper, it is presented that the research on a reliable control algorithm of the pumping system instrument for arthroscopic surgery. Before clinical operation, the flexible artificial articulation model is used for realizing the model the most same as human's and the algorithm has been exploited for it. This system is considered of the following; limited sensing point, dynamic effect by compliance, time delay by fluid flow and so on. The system is composed with a pressure controller, a regulator for keeping air pressure, an airtight tank that can have distilled water packs, artificial articulation and a measuring system, and has controlled by the feedback of pressure sensor on the artificial articulation. Also the system has applied to Smith Predictor for time delay and the parameter estimation method for the most suitable system with both the experiment data and modeling. In this paper, the pressure error that is between an air pressure tank and an artificial articulation was measured so that the system could be presumed and then the controller had developed for performing State-Feedback. Finally, the controller with a real microprocessor has realized. The confidence of system can be proved by applying this control algorithm to an artificial articulation experiment material.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.424-427
• /
• 2017

Smith predictor can't be applied to the time delay systems that have poles near the origin or a pure integrator or a modeling error, because of occurring the steady state error for the step disturbance. In this paper, a new Smith predictor controller for these systems is designed to eliminate the effects of the disturbance. A disturbance observer to estimate a disturbance is proposed and a new controller is designed using the estimated disturbance. As a result, the new controller can eliminate the effects of the disturbance and modeling error. The simulation results for the steam superheater and the steam pressure systems verify the efficiency of the proposed controller.