• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.376-382
• /
• 2008

Developing highly cost-efficient and reliable embedded systems demands hardware/software co-design and co-simulation due to fast TTM and verification issues. So, it is essential that Platform-Based SoC design methodology be used for enhanced reusability. This paper addresses a reusable SoC platform based on OpenCores soft processor with reconfigurable architectures for hardware/software codesign methodology. The platform includes a OpenRISC microprocessor, some basic peripherals and WISHBONE bus and it uses the set of development environment including compiler, assembler, and debugger. The platform is very flexible due to easy configuration through a system configuration file and is reliable because all designed SoC and IPs are verified in the various test environments. Also the platform is prototyped using the Xilinx Spartan3 FPGA development board and is implemented to a single chip using the Magnachip cell library based on $0.18{\mu}m$ 1-poly 6-metal technology.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.4227-4240
• /
• 2019

In this paper, we present our proposed magnetic induction based wireless communication system. The proposed system is designed to perform communication as well as distance measurement in underground environments. In order to improve the communication quality, we propose and implement the adaptive channel compensation technique. Based on the fact that the channel may be fast time-varying, we keep track of the channel status each time the data is received and accordingly compensate the channel coefficient for any change in the channel status. By using the proposed compensation technique, the developed platform can reliably communicate over distances of 10m while the packet error rate is being maintained under 5%. We also implement the distance measurement block that is useful for various applications that should promptly estimate the location of nearby nodes in communication. The distance between two nodes in communication is estimated by generating a table describing pairs of the magnetic signal strength and the corresponding distance. The experiment result shows that the platform can estimate the distance of a node located within 10m range with the measurement error less than 50cm.

• International Journal of Contents
• /
• v.7 no.1
• /
• pp.23-28
• /
• 2011

In a SoC (system-on-chip) design, a design complexity is a big bottleneck. In order to overcome the design complexity, platform based design method is widely adopted for designers. Most complex SoCs need a heterogeneous design development environment for hardware and software co-design. In this paper, we discuss about some kinds of verification approaches with platform based design methodology at various abstraction levels of SoC design. We separate the verification process to two steps according to the different levels of verification. We employ a flexible SoC design environment to support simultaneous hardware and software development. We demonstrate the verification strategy of a target SoC design, IEEE 802.11a WLAN SoC.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.533-538
• /
• 2005

We developed a pipelined scheduling technique of functional hardware and software modules for platform-based system-on-a-chip (SoC) designs. It is based on a modified list scheduling algorithm. We used the pipelined scheduling technique for a performance analysis of an MPEG4 video encoder application. Then, we applied it for architecture exploration to achieve a better performance. In our experiments, the modified SoC platform with 6 pipelines for the 32-bit dual layer architecture shows a 118% improvement in performance compared to the given basic SoC platform with 4 pipelines for the 16-bit single-layer architecture.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.9-15
• /
• 2014

A virtual platform models a processor core and the peripheral devices constituting the SoC in software. Major companies utilize a variety of platforms for product development with optimal SW+SoC integrated system architecture design and IP reuse based Top-Down design flow using a virtual platform. In this paper, we propose a virtual platform based on OpenRISC, an open source RISC based core. The proposed virtual platform supports high speed emulation of approximately 20 MIPS using DBT (Dynamic Binary Translation).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.397-400
• /
• 2009

This paper describes ASIC design of Multimedia application SoC platform based RISC processor with BTB(Branch Target Buffer). For performance enhancement of platform, we use a simple branch prediction scheme, BTB structure, that stores a target address for branch instruction to remove pipeline harzard. Also, the platform includes a number of peripheral such as VGA controller, AC97 controller, UART controller, SRAM interface and Debug interface. The platform is designed and verified on a Xilinx VERTEX-4 FPGA using a number of test programs for functional tests and timing constraints. Finally, the platform is implemented into a single ASIC chip which can be operated at 100MHz clock frequency using the Chartered 0.18um process. As a result of performance estimation, the proposed platform shows about 5~9% performance improvement in comparison with the previous SoC Platform.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1446-1459
• /
• 2007

This paper presents and analyzes a novel technique that makes it possible to improve the performance of low-end embedded systems through SoC(System-on-a-Chip) platform supporting dynamic cooperation between hardware and software modules. Traditional embedded systems with limited hardware resources have the poor capability of carrying out multi-tasking jobs including complex calculations. The proposed SoC platform, which provides dynamic cooperation between hardware and software modules, decomposes a single specific system into tasks for given system requirements. Additionally, we also propose a technique for efficient communication and synchronization between hardware and software tasks in cooperation with each other. Several experiments are conducted to illustrate the application and efficiency of the proposed SoC platform. They show that the proposed SoC platform outperforms the traditional embedded system, where only software tasks run, as the number of memory access is increased and the system become more complex.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.59-70
• /
• 2007

In this paper, we proposed an effective T&L(Transform & Lighting) Processor architecture for a real time 3D graphics acceleration SoC(System on a Chip) in a mobile system. We designed Floating point arithmetic IPs for a T&L processor. And we verified IPs using a SoC Platform. Designed T&L Processor consists of 24 bit floating point data format and 16 bit fixed point data format, and supports the pipeline keeping the balance between Transform process and Lighting process using a parallel computation of 3D graphics. The delay of pipeline processing only Transform operation is almost same as the delay processing both Transform operation and Lighting operation. Designed T&L Processor is implemented and verified using a SoC Platform. The T&L Processor operates at 80MHz frequency in Xilinx-Virtex4 FPGA. The processing speed is measured at the rate of 20M Vertexes/sec.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.510-516
• /
• 2003

In this paper, we describe the development of a platform-based SoC of a 32-bit smart card. The smart card uses a 32-bit microprocessor for high performance and two cryptographic processors for high security. It supports both contact and contactless interfaces, which comply with ISO/IEC 7816 and 14496 Type B. It has a Java Card OS to support multiple applications. We modeled smart card readers with a foreign language interface for efficient verification of the smart card SoC. The SoC was implemented using 0.25 ${\mu}m$ technology. To reduce the power consumption of the smart card SoC, we applied power optimization techniques, including clock gating. Experimental results show that the power consumption of the RSA and ECC cryptographic processors can be reduced by 32% and 62%, respectively, without increasing the area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.364-367
• /
• 2012

In this paper, AXI4 BUS was implemented using Verilator and C/C++ for verification of SoC platform H/W IP which is based on AXI4 BUS. In this paper we proposed a method to verify the AXI4 BUS based SoC platform H / W IP by implemented AXI4 BUS on PC using Verilator and C/C++. The result shows AXI4 BUS based H/W IP that is verified by implemented AXI4 BUS is to perform the same behavior on FPGA environment.