• Title/Summary/Keyword: Software Faults

Search Result 221, Processing Time 0.026 seconds

Software Reliability Growth Models considering an Imperfect Debugging environments (불완전 디버깅 환경을 고려한 소프트웨어 신뢰도 성장모델)

  • 이재기;이규욱;김창봉;남상식
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.6A
    • /
    • pp.589-599
    • /
    • 2004
  • Most models assume the complete debugging environments by requiring a complete software correction in quantitative evaluation of software reliability. But, in many case, new faults are involved in debugging works, for complete software correction is impossible. In this paper, software growth model is proposed about incomplete debugging environments by considering the possibility of new faults involvements, and software faults occurrence status are also mentioned about NHPP by considering software faults under software operation environments and native faults owing to the randomly involved faults in operation before test. While, effective quantitative measurements are derived in software reliability evaluation, applied results are suggested by using actual data, and fitnesswith existing models are also compared and analyzed.

A Dependability Modeling of Software Under Memory Faults for Digital System in Nuclear Power Plants

  • Park, Jong-Gyun;Seong, Poong-Hyun
    • Nuclear Engineering and Technology
    • /
    • v.29 no.6
    • /
    • pp.433-443
    • /
    • 1997
  • In this work, an analytic approach to the dependability of software in the operational phase is suggested with special attention to the hardware fault effects on the software behavior : The hardware faults considered are memory faults and the dependability measure in question is the reliability. The model is based on the simple reliability theory and the graph theory which represents the software with graph composed of nodes and arcs. Through proper transformation, the graph can be reduced to a simple two-node graph and the software reliability is derived from this graph. Using this model, we predict the reliability of an application software in the digital system (ILS) in the nuclear power plant and show the sensitivity of the software reliability to the major physical parameters which affect the software failure in the normal operation phase. We also found that the effects of the hardware faults on the software failure should be considered for predicting the software dependability accurately in operation phase, especially for the software which is executed frequently. This modeling method is particularly attractive for the medium size programs such as the microprocessor-based nuclear safety logic program.

  • PDF

A Cost-Reliability Model for the Optimal Release Time of a Software System (결함유형에 따른 소프트웨어 신뢰도와 소프트웨어 상품화 최적 시기 전략)

  • Kim Yeong-Hwi;Lee Wan-Hyeong
    • Journal of the military operations research society of Korea
    • /
    • v.16 no.2
    • /
    • pp.135-150
    • /
    • 1990
  • This paper classifies faults into three types : simple, degenerated, and regenerated faults. This paper also deals with the characteristics of each type of fault to determine the software reliability based on the assumption; i. e., a system consisting of several subsystems (modules) which may be debugged simultaneously. For each type of fault, several formulas are developed to obtain the failure rate and the expected number of failures found during debugging. A model is developed based on the formulas of the failure rate and the expected number of failures to decide the optimal release time of a new software: minimizing the total cost with constraints restricting to the failure rate of each module in the software. By using this model, optimal release times are found for some cases; the eliminated faults are assumed simple faults only, regenerated faults only, simple and degenerated faults, and so on.

  • PDF

Embedded Software Reliability Modeling with COTS Hardware Components (COTS 하드웨어 컴포넌트 기반 임베디드 소프트웨어 신뢰성 모델링)

  • Gu, Tae-Wan;Baik, Jong-Moon
    • Journal of KIISE:Software and Applications
    • /
    • v.36 no.8
    • /
    • pp.607-615
    • /
    • 2009
  • There has recently been a trend that IT industry is united with traditional industries such as military, aviation, automobile, and medical industry. Therefore, embedded software which controls hardware of the system should guarantee the high reliability, availability, and maintainability. To guarantee these properties, there are many attempts to develop the embedded software based on COTS (Commercial Off The Shelf) hardware components. However, it can cause additional faults due to software/hardware interactions beside general software faults in this methodology. We called the faults, Linkage Fault. These faults have high severity that makes overall system shutdown although their occurrence frequency is extremely low. In this paper, we propose a new software reliability model which considers those linkage faults in embedded software development with COTS hardware components. We use the Bayesian Analysis and Markov Chain Monte-Cairo method to validate the model. In addition, we analyze real linkage fault data to support the results of the theoretical model.

The Analysis of Software Fault and Application Method of Weight using the Testing Data (시험데이터를 이용한 소프트웨어 결함분석과 가중치 적용 방안)

  • Jung, Hye-Jung
    • Journal of Korea Multimedia Society
    • /
    • v.14 no.6
    • /
    • pp.766-774
    • /
    • 2011
  • We survey the software faults according to the software characteristics, so we can use it to make a software testcases. We divide the software fault according to six characteristics, functionality, usability, reliability, efficiency, maintainability, and portability. We analyze the software faults to find the common factors according to the software products, also we survey the number of faults according to six characteristics. We propose the method of weight application using the relative comparison of the number of faults.

A Study on Software Reliability Growth Modeling with Fault Significance Levels (결함 중요도 단계를 고려한 소프트웨어 신뢰도 성장 모델에 관한 연구)

  • 신경애
    • Journal of the Korea Computer Industry Society
    • /
    • v.3 no.7
    • /
    • pp.837-844
    • /
    • 2002
  • In general, software test is carried out to detect or repair errors in system during software development process. Namely, we can evaluate software reliability through collecting and removing the faults detected in testing phase. Software reliability growth model evaluates reliability of software mathematically. Many kinds of software reliability growth modeling which modeling the processes of detecting, revising and removing the faults detected in testing phase have been proposed in many ways. and, it is assumed that almost of these modeling have one typed detect and show the uniformed detection rate. In this study, significance levels of the faults detected in test phase are classified according to how they can affect on the whole system and then the fault detection capability of them is applied. From this point of view, We here by propose a software reliability growth model with faults detection capability according considering fault significance levels and apply some fault data to this proposed model and finally verify its validity by comparing and estimating with the existing modeling.

  • PDF

A Dependability Estimation of Microprocessor-based Software under Memory Faults using Stochastic Activity Network (SAN)

  • Park, Jong-Gyun;Seong, Poong-Hyun
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05b
    • /
    • pp.725-730
    • /
    • 1996
  • In this work, the software behavior under memory faults in operation phase is modeled and simulated using the stochastic activity network, generalized stochastic Petri nets. This networks permit the representation of concurrency, timeliness, fault tolerance, and degradable performance of system and provide a means for determining the stochastic behavior of a complex system. We estimate the reliability of an application software in the digitized system in nuclear power plants and show the sensitivity of the software reliability to the major physical parameters which affect the software failure in normal operation phase. We found that the effects of the hardware faults on the software failure should be considered for predicting the software dependability accurately in operation phase.

  • PDF

Test Data Selection Technique to Detect Interaction Faults in Embedded System (내장형 시스템의 상호작용 오류 감지를 위한 테스트 데이타 선정 기법)

  • 성아영;최병주
    • Journal of KIISE:Software and Applications
    • /
    • v.30 no.12
    • /
    • pp.1149-1157
    • /
    • 2003
  • As an Embedded system combining hardware and software gets more complicated, the importance of the embedded software test increases. Especially, it is mandatory to test the embedded software in the system which has high safety level. In embedded system, it is necessary to develop a test technique to detect faults in interaction between hardware and software. In this paper, we propose a test data selection technique using a fault injection technique for the faults in interaction between hardware and software in embedded system and we apply our technique to the Digital Plant Protection System and analyze effectiveness of the proposed technique through experiments.

A cost-reliability model for the optimal release time of a software system

  • Lee, Won-Hyung;Kim, Yong-Whi
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 1991.10a
    • /
    • pp.405-421
    • /
    • 1991
  • In this paper, faults existing in a software system is classified into three types; simple, degenerative and regenerative faults. The reliability functions and failure rates of both a software module and system which have a mixture of such faults are obtained and the expected number of failures in the system after time T is also derived. Using the formulas obtained, a cost-reliability model and an efficient algorithm for optimal software release time are proposed via nonlinear programming formulation ; minimizing the total test cost with constraints on the failure rates of each module. Application of this model to several cases are presented and it appears to be more realistic.

  • PDF

Cost Implications of Imperfect Repair in Software Reliability

  • Chuiv, Nora-Ni;Philip J. Boland
    • International Journal of Reliability and Applications
    • /
    • v.2 no.3
    • /
    • pp.147-160
    • /
    • 2001
  • The reliability of computer software is of prime importance for all developers of software. The complicated nature of detecting and removing faults from software has led to a plethora of models for reliability growth. One of the most basic of these is the Jelinski Moranda model, where it is assumed that there are N faults in the software, and that in testing, bugs (or faults) are encountered (and removed when defected) according to a stochastic process at a rate which at a given point in time is proportional to the number of bugs remaining in the system. In this research, we consider the possibility that imperfect repair may occur in any attempt to remove a detected bug in the Jelinski Moranda model. We let p represent the probability that a fault which is discovered or detected is actually perfectly repaired. The possibility that the probability p may differ before and after release of the software is also considered. The distribution of both the number of bugs detected and perfectly repaired in a given time period is studied. Cost models for the development and release of software are investigated, and the impact of the parameter p on the optimal release time minimizing expected costs is assessed.

  • PDF