• Title/Summary/Keyword: Specific Recovery Ratio

Search Result 51, Processing Time 0.028 seconds

The Physical Properties of Filling Batt Using Polyester Yarn (Polyester사를 이용한 충전용 솜사의 물성)

  • Park, Myung-Soo
    • Fashion & Textile Research Journal
    • /
    • v.9 no.3
    • /
    • pp.347-350
    • /
    • 2007
  • To analyse basic properties for making packing batt according to doubling condition, packing batt yarn, of $300^D$, $900^D$, $3600^D$ made from DTY yarn $150^D$/48 were produced from KTDI. The results are as follows: The birefringence of the sample yarn increased with increasing the annealing temperature and denier. The initial modulus of the sample yarn decreased with increasing the annealing temperature and denier. The higher than annealing temperature of $160^{\circ}C$, initial modulus of the sample are equilibrated. The strain recovery ratio of samples decreased with increasing the annealing temperature and denier. The lower than annealing temperature of $140^{\circ}C$, strain recovery ratio of the sample are decreased Where the $900^D$, $3600^D$ yarns are at $100^{\circ}C$ the specific bending rigidity value obtained is 0.65kgf/d but the twisted yarn (3,600) obtained 0.006 ($gfcm^2/tex^2$). However, where the heat temperature is $160^{\circ}C$, specific bending rigidity value obtained 0.003($gfcm^2/tex^2$).

Analgesic Effects of Electroacupuncture, Warm Needling and Radio Frequency Warm Needling on Surgical Ankle Sprain Model in Rats (흰쥐의 발목염좌에 대한 전침, 온침 및 고주파온침 자극별 진통 효과의 비교)

  • Yang, Seung-Bum;Kim, Min-Su;Choi, Suck-Jun;Kim, Jae-Hyo
    • Korean Journal of Acupuncture
    • /
    • v.32 no.1
    • /
    • pp.20-29
    • /
    • 2015
  • Objectives : The objectives of this study is to compare the effects of electroacupuncture(EA), warm needling(WN) and Radio Frequency warm needling(RFWN) stimulations on the acupoints at the artificially damaged ankles of Sprague-Dawley rats, which could be classified as the Grade 3. Methods : The foot weight bearing force ratio(FWBFR) of ankle sprain was measured first at 24 hours after without any other stimulations. Pain Recovery Index(PRI) represents the analgesic level, and modified Pain Recovery Index(mPRI) shows the accumulated recovery level. PRI was measured at 2 hours after each stimulus on GB34, GB39 and GB42, and mPRI was during 7 days. Results : EA stimulation of GB34 and GB39 acupoint in grade 3 ankle sprain showed a marked analgesic and recovery effect. RFWN of GB42 exhibited significant analgesic and pain recovery effect. RFWN of GB34 resulted in pain recovery effect but not analgesic effects, and RFWN of GB39 resulted in analgesic effect 2 hours after but not pain recovery. However, WN did not affect the pain recovery among three acupoints at all. Conclusions : In the Grade 3 ankle sprain model, the difference of analgesic effects were explained by the acupoints and the stimulation methods according to the accumulated recovery effects during 7 days. It is insufficient to determine that a certain acupoint has a specific analgesic effect depending on the stimulation method by the results of this study. Therefore, the effects of each stimulation on the acupoints in any other meridians at the sprained ankle should be compared and analyzed.

A Study on Service Recovery and Customer Behavior from Service Failure (서비스 실패에 따른 서비스 회복과 고객행동에 관한 연구)

  • Park, Young-Bae
    • Culinary science and hospitality research
    • /
    • v.13 no.1 s.32
    • /
    • pp.152-165
    • /
    • 2007
  • The purpose of this study is to prove that the appropriate fit between service failure and recovery strategy can efficiently maximize customer satisfaction and behavioral intention, by using the prepared scenario through comprehensive approach concerning how the expectation level of service recovery has influence on perceived fairness, satisfaction and behavioral intention of service recovery based upon size in case of service failure. This study has been conducted by way of selection of filling-up type questionnaires for customers themselves who have experience in service failure out of customers who can easily visit family and hotel restaurants, that is, domestic restaurants in Seoul area, $June{\sim}August$ 2004, by setting factorial design of 2(control, severeness)$\times$3(distributive fairness, procedural fairness, mutual relational fairness)$\times$2(customer satisfaction, customer behavior). The survey was performed on the customers who visited common restaurants, family restaurants, hotel restaurants, etc. mainly in Seoul, and total 600 sheets of questionnaires were distributed and 496 sheets of them were returned(82.67% of return ratio). Research findings are as follows; First, perceived recovery justice has an effect on customer satisfaction and behavioral intention. Second, customer satisfaction and restaurant satisfaction have positive influence on behavioral intention. The results will be helpful for them to develop a further service failure and recovery framework. For service marketing managers, the results will suggest specific guidelines for establishing service recovery strategies.

  • PDF

A Thermodynamic Study on Suction Cooling-Steam Injected Gas Turbine Cycle (吸氣冷却-蒸氣噴射 가스터빈 사이클에 관한 열역학적 연구)

  • 박종구;양옥룡
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.1
    • /
    • pp.77-86
    • /
    • 1992
  • This paper discusses the thermodynamic study on the suction cooling-steam injected gas turbine cycle. The aim of this study is to improve the thermal efficiency and the specific output by steam injection produced by the waste heat from the waste heat recovery boiler and by cooling compressor inlet air by an ammonia absorption-type suction cooling system. The operating region of this newly devised cycle depends upon the pinch point limit and the outlet temperature of refrigerator. The higher steam injection ratio and the lower the evaporating temperature of refrigerant allow the higher thermal efficiency and the specific output. The optimum pressure ratios and the steam injection ratios for the maximum thermal efficiency and the specific output can be found. It is evident that this cycle considered as one of the most effective methods which can obtain the higher thermal efficiency and the specific output comparing with the conventional simple cycle and steam injected gas turbine cycle.

A Study on the Design and Performance Analysis of a Gun-Launched Projectile with Solid fuel Ramjet(SFRJ) (포 발사 고체연료 램제트 탄의 설계 및 성능해석에 관한 연구)

  • Lee, Sang-Kil;Kim, Chang-Kee;Lee, Sang-Seung
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.12 no.3
    • /
    • pp.49-59
    • /
    • 2008
  • In this study, the design method of a 155 mm Solid Fuel Ramjet projectile is proposed and a flight performance analysis program through mathematical modelling is developed. Through flight performance analysis, ramjet performance during flight, which is comprised of thrust, specific impulse, pressure recovery ratio, location of shock waves, and magnitude of drag, was predicted. The results show that compared to Rocket Assisted Projectile(RAP), the range was increased by 90 %. Furthermore, how variations in nozzle exit area ratio and the intake area cause variations in range was observed. This research on modeling and simulation methodology will provide useful data for future development of solid fuel ramjet projectiles.

Exergy Analysis of Regenerative Gas Turbine Systems with Afterfogging (압축기 출구 물분사가 있는 재생 가스터빈 시스템의 엑서지 해석)

  • Kim, Kyoung-Hoon;Ko, Hyung-Jong;Kim, Se-Woong
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.13 no.1
    • /
    • pp.31-39
    • /
    • 2010
  • An exergy analysis is carried out for the regenerative gas turbine cycle which has a potential of enhanced thermal efficiency and specific power owing to the more possible water injection than that of inlet fogging under the ambient conditions. Using the analysis model in the view of the second law of thermodynamics, the effects of pressure ratio, water injection ratio and ambient temperature are investigated on the performance of the system such as exergetic efficiency, heat recovery ratio of recuperator, exergy destruction or loss ratios, and on the optimal conditions for maximum exergy efficiency. The results of computation for the typical cases show that the regenerative gas turbine system with afterfogging can make a notable enhancement of exergy efficiency.

  • PDF

Efficient and Secure Routing Protocol forWireless Sensor Networks through SNR Based Dynamic Clustering Mechanisms

  • Ganesh, Subramanian;Amutha, Ramachandran
    • Journal of Communications and Networks
    • /
    • v.15 no.4
    • /
    • pp.422-429
    • /
    • 2013
  • Advances in wireless sensor network (WSN) technology have enabled small and low-cost sensors with the capability of sensing various types of physical and environmental conditions, data processing, and wireless communication. In the WSN, the sensor nodes have a limited transmission range and their processing and storage capabilities as well as their energy resources are limited. A triple umpiring system has already been proved for its better performance in WSNs. The clustering technique is effective in prolonging the lifetime of the WSN. In this study, we have modified the ad-hoc on demand distance vector routing by incorporating signal-to-noise ratio (SNR) based dynamic clustering. The proposed scheme, which is an efficient and secure routing protocol for wireless sensor networks through SNR-based dynamic clustering (ESRPSDC) mechanisms, can partition the nodes into clusters and select the cluster head (CH) among the nodes based on the energy, and non CH nodes join with a specific CH based on the SNR values. Error recovery has been implemented during the inter-cluster routing in order to avoid end-to-end error recovery. Security has been achieved by isolating the malicious nodes using sink-based routing pattern analysis. Extensive investigation studies using a global mobile simulator have shown that this hybrid ESRP significantly improves the energy efficiency and packet reception rate as compared with the SNR unaware routing algorithms such as the low energy aware adaptive clustering hierarchy and power efficient gathering in sensor information systems.

Effects of Special Protection Area Designation on Soil Properties and Vegetation Coverage of Degraded Trails (국립공원 특별보호구 지정이 훼손 탐방로 주변 토양과 식생피도에 미치는 영향)

  • Kim, Dong-Hwan;Lee, Dong-Ho;Kim, Hyun Seok;Kim, Seong-il
    • Journal of Korean Society of Forest Science
    • /
    • v.104 no.3
    • /
    • pp.352-359
    • /
    • 2015
  • This study was conducted to evaluate how the special protection area designations of degraded trails effect on the soil and vegetation recovery of degraded trails. The study areas were established on an opened trail and a 16-year closed trail, which was prohibited to enter after the designation as a special protection area for recovery, at Bukhansan National Park. Soil core sampling and measurements of vegetation cover were performed to compare soil and vegetation properties of the trails. Soil bulk density increased and soil water total nitrogen decreased on the opened trail, while no significant differences were found on bulk density, soil water, total nitrogen, acidity, and organic matter on the closed trail. On the opened trail, vegetation cover was seemed to be degraded, because vegetation litter cover ratio was low and barren rock cover ratio was high. On the closed trail, litter rock barren cover ratio of the closed trail was recovered, but only limited recovery was found on vegetation cover by applying environmental damage condition rating class. In conclusion, the closed trail was recovered by designation of special protection area, while difference in recovery progress of soil and vegetation was found. Therefore, designation of special protection area of degraded area should be based on scientific basis of recovery characteristics of the area. In order to improve the effectiveness of special protection area system, further specific standards for special protection area designation and management would be needed, considering ecological and social importance of target areas.

Multi- effect air gap membrane distillation process for pesticide wastewater treatment

  • Pangarkar, Bhausaheb L.;Deshmukh, Samir K.;Thorat, Prashant V.
    • Membrane and Water Treatment
    • /
    • v.8 no.6
    • /
    • pp.529-541
    • /
    • 2017
  • A multi-effect air gap membrane distillation (ME-AGMD) module for pesticide wastewater treatment is studied with internal heat recovery, sensible heat of brine recovery, number of stages and the use of fresh feed as cooling water in a single module is implemented in this study. A flat sheet polytetrafluroethylene (PTFE) membrane was used in the 4-stage ME-AGMD module. The maximum value of permeate flux could reach $38.62L/m^2h$ at feed -coolant water temperature difference about $52^{\circ}C$. The performance parameter of the module like, specific energy consumption and gain output ratio (GOR) was investigated for the module with and without heat recovery. Also, the module performance was characterized with respect to the separation efficiency of several important water quality parameters. The removal efficiency of the module was found to be >98.8% irrespective water quality parameters. During the experiment the membrane fouling was caused due to the deposition of the salt/crystal on the membrane surface. The membrane fouling was controlled by membrane module washing cycle 9 h and also by acidification of the feed water (pH=4) using 0.1M HCl solution.