• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.197-205
• /
• 2013

Real time transient stability assessment mainly depends on real-time prediction. Unfortunately, conventional techniques based on offline analysis are too slow and unreliable in complex power systems. Hence, fast and reliable stability prediction methods and simple stability criterions must be developed for real time purposes. In this paper, two new methods for real time determining critical clearing time based on clustering identification are proposed. This article is covering three main sections: (i) clustering generators and recognizing critical group; (ii) replacing the multi-machine system by a two-machine dynamic equivalent and eventually, to a one-machine-infinite-bus system; (iii) presenting a new method to predict post-fault trajectory and two simple algorithms for calculating critical clearing time, respectively established upon two different transient stability criterions. The performance is expected to figure out critical clearing time within 100ms-150ms and with an acceptable accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.13-15
• /
• 2004

In this paper, we propose a novel stability criterion and a guideline of controller design for switched linear systems. Unlike existing criterions such as Lie algebraic method and multiple Lyapunov functions method, the proposed criterion can be applied to each individual system without considering an overall system. By applying the proposed criterion to each individual system separately, a state feedback controller can be easily designed. Stability of the overall system is proved by developing a rule to determine non-increasing Lyapunov functions recursively at each switching instant. An illustrative example is given.

• Structural Engineering and Mechanics
• /
• 제60권5호
• /
• pp.809-828
• /
• 2016

In deep open pit mines, slope stability is very important. Particularly, increasing the depths increase the risks in mines having weak rock mass. Blasting operations in this type of open pits may have a negative impact on slope stability. Several or combination of methods can be used in order to enable better analysis in this type of deep open-pit mines. Numerical modeling is one of these options. Many complex problems can be integrated into numerical methods at the same time and analysis, solutions can be performed on a single model. Rock failure criterions and rock models are used in numerical modeling. Hoek-Brown and Mohr-Coulomb terms are the two most commonly used rock failure conditions. In this study, mine planning and discontinuity conditions of a lignite mine facing two big landslides previously, has been investigated. Moreover, the presence of some damage before starting the study was identified in surrounding structures. The primary research of this study is on slope study. In slope stability analysis, numerical modeling methods with Hoek-Brown and Mohr-Coulomb failure criterions were used separately. Preparing the input data to the numerical model, the outcomes of patented-blast vibration minimization method, developed by co-author was used. The analysis showed that, the model prepared by applying Hoek-Brown failure criterion, failed in the stage of 10. However, the model prepared by using Mohr-Coulomb failure criterion did not fail even in the stage 17. Examining the full research field, there has been ongoing production in this mine without any failure and damage to surface structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.41-45
• /
• 1997

To design a control system, it is a elementary point that the stability of the system should be guaranteed. Also, the phase of the system plays an important role for its frequence performance. In this paper, we present two stability criterion of repetitive control system with phase-lead and lag compensator. First, the stability criterion for the servo control system with phase-lead and lag compensator is shown by using small-gain theorem. Second, for the repetitive control system with the compensator, the stability criterion, also, is determined by using small-gain theorem. Two stability criterions show the same results that the stability depends on a coefficient of the phase-lead and lag compensator under some condition in servo control system and repetitive control system.

• 전자공학회논문지SC
• /
• 제47권4호
• /
• pp.1-6
• /
• 2010

본 논문에서는 상태에 시변 시간지연과 폴리토픽 변수 불확실성을 가지는 특이시스템을 위한 새로운 지연 종속 및 변수 종속 강인 안정성 조건을 제시한다. 새로운 변수종속 리아푸노프 함수를 기반으로 구한 강인 안정성 조건은 볼록최적화가 가능한 선형행렬부등식으로 나타난다. 제안하는 조건은 비특이시스템과 특이시스템의 강인 안정성 문제에 동시에 적용가능한 일반적인 알고리듬이다. 수치예제를 통하여 제시한 강인 안정성 조건의 타당성을 보이고, 기존의 비특이시스템의 결과들과의 비교를 통하여 제안한 조건이 덜 보수적임을 확인한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.564-567
• /
• 2002

This paper evaluates the stability of the terminal group for he inter-vehicle communication (IVC) network with an autonomous relay access scheme. Some stability criterions such as updating rate, terminal group convergence probability and total path average holding time have been conducted by computer simulation. As the results, dynamic moving of the terminal is the serious problem that can degrade the stability of the terminal group and directly affect to overall performance of the IVC network.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.668-673
• /
• 2010

Given a periodic reference signal or disturbance, repetitive control is a special control scheme to reduce a tracking error effectively by the periodic signal generator in the repetitive controller. In general, a repetitive controller is added on the existing feedback control system to improve the tracking performance. However, because the information used in the design of the feedback controller is not taken into account, the design problem of the repetitive controller is totally another problem irrespective of that of the feedback controller. In this paper, we present a more general method to design an add-on type repetitive controller using the information on the performance of the existing feedback control system. We first show that a robust stability condition of repetitive control systems is obtained using the well-known robust performance condition of general feedback control systems. It is also shown that we can obtain a steady-state tracking error described in a simple form without time-delay element if the robust stability condition is satisfied for the repetitive control system. From the obtained results, several design criterions for repetitive controller are provided. Through the simulation study, the feasibility of the proposed method is verified.

• Structural Engineering and Mechanics
• /
• 제66권5호
• /
• pp.583-594
• /
• 2018

A theoretical formulation based on the linearized potential theory, the Descartes' rule and the extremum optimization method is presented to calculate the critical distance of lifting points of the fully balanced hoist vertical ship lift, and to study pitching stability of the ship lift. The overturning torque of the ship chamber is proposed based on the Housner theory. A seven-free-degree dynamic model of the ship lift based on the Lagrange equation of the second kind is then established, including the ship chamber, the wire rope, the gravity counterweights and the liquid in the ship chamber. Subsequently, an eigenvalue equation is obtained with the coefficient matrix of the dynamic equations, and a key coefficient is analyzed by innovative use of the minimum optimization method for a stability criterion. Also, an extensive influence of the structural parameters contains the gravity counterweight wire rope stiffness, synchronous shaft stiffness, lifting height and hoists radius on the critical distance of lifting points is numerically analyzed. With the Runge-Kutta method, the four primary dynamical responses of the ship lift are investigated to demonstrate the accuracy/reliability of the result from the theoretical formulation. It is revealed that the critical distance of lifting points decreases with increasing the synchronous shaft stiffness, while increases with rising the other three structural parameters. Moreover, the theoretical formulation is more applicable than the previous criterions to design the layout of the fully balanced hoist vertical ship lift for the ensuring of the stability.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.326-334
• /
• 2018

Underground water-sealed gas storage caverns have become the primary method for strategic storage of LPG. Previous studies of excavation blasting effects on large-scale underground water-sealed gas storage caverns are rare at home and abroad. In this paper, the blasting excavation for underground water-sealed propane storage caverns in Yantai was introduced and field tests of blasting vibration were carried out. Field test data showed that the horizontal radial velocity had a major controlling effect in the blasting vibration and frequencies would not cause the vibration velocity concentration effects. In terms of the influence of blasting vibration on adjacent caverns, the dynamic finite element model in LS-DYNA soft was established, whose reliability was verified by field test data. The numerical results indicated the near-blasting side was primary zone for the structural failure and tensile failure tended to occur in the middle of the curved wall on the near-blasting side. Meanwhile, the safety criterions for adjacent caverns based on stress wave theory and according to statistic relationship between peak effective tensile stress and peak particle velocities were obtained, respectively. Finally, with Safety Regulations for Blasting in China (GB6722-2014) taken into account, a final safety criterion was proposed.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.463-473
• /
• 2017

벤토나이트는 물과 접촉하면 팽창하고 점성을 발휘하는 성질이 있어 일반적으로 차수가 필요한 토목공사에 많이 활용되고 있다. 이수식 TBM에서는 이와 같은 성질을 활용하여 가압된 슬러리로 불투수성 막을 형성하고 굴착벽면의 붕괴를 방지하는 동시에 굴착된 버력을 운송하며 굴착을 수행한다. 하지만 벤토나이트는 해수와 접촉할 경우 팽창성이 저하되어 그 성질을 발휘하지 못하는 문제가 있다. 이는 해수 조건에서 이수식 TBM으로 터널을 굴착할 시 지하수 유입 증가로 인한 굴착 안정성 및 버력 배출에 문제를 초래할 수 있다. 본 연구에서는 이수식 TBM으로 터널을 굴착 시 해수의 유입으로 인한 슬러리의 상태변화를 살펴보고 이에 대응하기 위한 슬러리 관리방안을 제시 하였다. 이를 위해 현장에서 적용된 슬러리 품질관리 기준을 바탕으로 실내 시험을 수행하였으며, 해수의 영향이 있는 현장에 적용 할 수 있는 방안을 제시하였다.