• Journal of Animal Science and Technology
• /
• 제52권6호
• /
• pp.467-473
• /
• 2010

A total of 4,323,781 records for informal 16 primary linear descriptive traits of dairy cows in Holstein breed from 1988 to 2007 in USA were analyzed to estimate adjustment factors for lactation number and stage. While all factors in the model were highly significant (P < 0.01), major influences on linear type traits were due to lactation number and stage. The frequencies of lactation number 1 through 6 were 58.6, 22.0, 11.8, 4.8, 2.1, and 0.8%, respectively. Further, the frequencies of lactation stage were 0.7, 76.9, 15.3, 4.9, and 2.1%, respectively, for springing, early, medium, late, and dry. To adjust 16 linear traits (stature, dairy form, strength, body depth, rump width, rump angle, legs rear view, leg set, foot angle, fore udder, rear udder height, rear udder width, udder support, udder depth, and front teat placement), additive and multiplicative adjustment factors of lactation number (lactations 2 to 4) and stage (springing, medium, late and dry) were estimated with the solutions in the generalized linear model, assigning lactation 1 and stage early as base class. Additive adjustment factors of lactation number ranged from -1.23 to 2.908, while multiplicative factors ranged from 0.853 to 2.207. Further, additive and multiplicative adjustment factors for lactation stage ranged from -0.668 to 0.785, and from 0.891 to 1.154. Application of adjustment factors to 20 randomly sampled sub-data sets produced the results that additive adjustment factors for both lactation number and stage reduced more mean square of lactation number and stage over 16 linear traits than any combination of adjustments, and leaded additive adjustment factors for both lactation number and stage as a choice of methods for adjustment of informal 16 primary linear type traits collected by classifiers of AI studs.

• 대한전자공학회논문지SD
• /
• 제45권2호
• /
• pp.44-48
• /
• 2008

가변 stage carry increment adder는 stage가 증가함에 따라 stage에서 계산되는 워드길이를 1비트씩 늘려줄 수 있으므로 속도는 $O(\sqrt{2n})$에 근접한다. 하지만 stage의 비트가 늘어남에 따라 stage에 입력되는 캐리의 팬 아웃이 증가하게 되고 이로 인하여 속도가 느려진다. 본 논문에서는 stage의 입력 비트를 증가하여도 팬 아웃이 stage에 관계없이 고정될 수 있는 알고리즘을 제안하고 37비트 덧셈기를 레이아웃하여 시뮬레이션 결과를 비교하였을 때 면적은 40% 늘어나는 것에 비해 덧셈기의 속도가 75% 향상되었다.

• 대한치과기공학회지
• /
• 제13권1호
• /
• pp.15-19
• /
• 1991

This study was made to effect on the porosity when model making for control of vibrator. Samples of total 600 were made by plaster and stone divided low, medium and high which is 100 each. The following results were obtained to observation porosity of surface by eyes. 1. Second stage was fewer than third stage, first stage was fewer than third stage in porosity number of plaster model. 2. Second stage was fewer than first stage in porosity number of stone model. 3. Stone model was fewer than plaster model in porosity number of third stage.

• 한국동물학회지
• /
• 제4권2호
• /
• pp.13-19
• /
• 1961

Free amino acids at five different developemntal stages (Gastrulation-Hatching -out stage) of Hynobius leechi BOULENGER were analyzed qualitatively by the use of paper paitition chromatography. It was found that the number of free amino acids increased as the development proceeded. The free amino acids identified at each stages are as follows : Gastrulation stage : Alaninie, Aspartic acid, Glutamin acid, Histidine, Methionine. Neural plate formation stage : Alanine , Aspartic acid, Glutamic acid, Glycine, Histidine, MEthionine, Phenylalanine, Proline, Serine, Trypotophan. Middle tail-bud stage : Alanine, Arginine, Asparagine,Aspartic acid, Citrulline, Glutamic acid, Glycine, Histidie,Hydroxyproline, Proline, Leucine, Methionine, Ornithine, Phenylalanine, Serine, Threonine, Tryptophan. Late tail-bud stage : Alanine, Arginine, Asparagine, Aspartic acid, Citrulline, Glutamic acid. Glycine, Histidine, Hydroxyproline, Leucine, Methionine, Ornithine, Phenylalanine, Proline, Serine, Threonine, Tryptophan, Valine. Hatching -out stage : the same with the late tail-bud stage. It seems probable that the metabolic systems of amino acids before and after the middle tail-bud stage are quite different from each other. Before the middle tail=-bud stage, the reaction system of amino acids is thought not to be completed while after that stage the system has been completed , because in the former period of the development , the number of freeamino acids increased rapidly with the development , and after that stage, there is practically no change in the number of free amino acids.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제4권1호
• /
• pp.43-49
• /
• 2000

The purpose of this paper is to address the theory of counting and the development of number concepts. Leslie Steffe and his colleagues developed the theory of children's counting types using the teaching experiment. As the results of their research, they published two books： "Children's counting types" (Steffe, von Glasersfeld, Richards, '||'&'||' Cobb, 1983) and "Construction of arithmetic meanings and strategies" (Steffe, Cobb, ＆ von Glasersfeld, 1988). They classified children's counting types into five categories： Perceptual Counting Stage, Figural Counting Stages, Initial Number Sequence Stage, Tacitly Nested Number Sequence Stage, and Explicitly Nested Number Sequence Stage. The meaning of this theory is added in the last part of this paper. this paper.

• 한국가축번식학회지
• /
• 제11권1호
• /
• pp.33-41
• /
• 1987

The cycle of the seminiferous epthelia in the testis of matured Korean Native Cattle was divided into eight stages. The results were summarized as follows: 1. Type A spermatogonia a, pp.ared twice as many at stage 2 as compared to stage 1, while maximum numbers were the average of 2.8 at stage 2. The intermediate and Type B spermatogonia were found during the stage 3 to 8, stage 6 to 8, respectively. The leptolene primary spermatocytes were not observed during the stage 5 to 7, while the pachytene primary spermatocytes were shown the least in number at stage 4, the secondary supermatocytes could be seen only at stage 4 and the round spermatids were not observed at stage 3, 4. 2. The relative frequencies of the eight stages of the cycle of the seminiferous eptithelia were 24.9, 14.2, 19.0, 6.3, 3.7, 7.9, 10.3 and 13.9%, respectively. 3. Some of the nuclei of Sertoli cells transformed from the "parallel" type to the "perpendicular" type. This evolution took place from stage 1 to 5, when the number of "perpendicular" type nuclei reached a peak and the number was decreased in the rest of the stages.sed in the rest of the stages.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.227-233
• /
• 2002

It is common for highly loaded supersonic stage to have very high relative inlet Mach number. To get this level of inlet Mach number, rotor blade outer diameter or rotational speed should be increased. In the case of commercial turbo-fan engine, it is preferred to make the rotor blade outer diameter large than increasing the rotational speed. But, for multi-stage fan of military engines, overall diameter is often restricted and they are apt to increase the rotational speed. With high rotational speed, relative inlet Mach number is likely to be well supersonic over the entire rotor blade span and the characteristic of the stage is affected with meridional shape of the stage, especially at near hub or tip. In this paper, the aerodynamic performance of two different hub surface shape is compared and it's merit and demerits were discussed.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1598-1603
• /
• 1994

A preliminary design procedure for a multi-stage axial compressor is developed, which is based on the stage-stacking method. It determines the flow coefficient which gives rise to the design conditions required such as pressure ratio, mass flow rate and rotational speed for a given specific mass flow rate at inlet to a compressor. With this flow coefficient, blade radii, every stage and compressor performance characterics such as stage pressure ratio, adiabatic efficiency etc. are calculated by stacking each stage performance characteristics. It is shown that there is an optimum number of stage which results in the maximum of compressor overall efficiency for a given specific mass flow rate at inlet to a compressor. A test design was tried for three different geometric design constraints, and comparison with a previous study shows that present procedure could be used reliably in determining the number of compressor stage in preliminary design stage.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.89-98
• /
• 2010

In this paper, a two-stage group sampling plan based on the time truncated life test is proposed for the Weibull distribution. The design parameters such as the number of groups and the acceptance number in each stage are determined by satisfying the producer's and consumer's risks simultaneously when the group size and the test duration are specified. The acceptable reliability level is expressed by the ratio of the true mean life to the specified life. It was demonstrated from the comparison with single-stage group sampling plans that the proposed plan can reduce the average sample number or improve the operating characteristics.

• 한국경영과학회지
• /
• 제31권1호
• /
• pp.1-13
• /
• 2006

In this paper we consider a design problem of a cyclic queueing network with two stages, each with a local buffer of limited capacity. Based on the theory of reversibility and product-form solution, we derive the throughput function of the network as a key performance measure to maximize. Two cases are considered. In case each stage consists of a single server, an optimal allocation policy of a given buffer capacity and work load between stages as well as the optimal number of customers is identified by exploiting the properties of the throughput function. In case each stage consists of multiple servers, the optimal policy developed for the single server case doesn't hold any more and an algorithm is developed to allocate with a small number of computations a given number of servers, buffer capacity as well as total work load and the total number of customers. The differences of the optimal policies between two cases and the implications of the results are also discussed. The results can be applied to support the design of certain manufacturing and computer/communication systems.