• 한국전자거래학회지
• /
• 제7권2호
• /
• pp.39-53
• /
• 2002

In the Korean domestic construction field, there are a lot of problems related to construction information exchange and sharing owing to the absence of construction drawing information exchange standard. To remedy the aforementioned inefficiency effectively, it is necessary to apply the STEP standard which is known as an international standard for achieving the establishment of Construction CALS. This study focus on suggesting a methodology to activate the STEP based construction drawing information exchange standard to the current construction drawing information exchanging and sharing practice. In this paper, the domestic and foreign standardization projects related to the construction drawing information have been investigated and analyzed. In addition, a methodology of applying and activating the STEP standard has been suggested. Finally, a verification and certification methodology for applying the CALS/EC construction drawing information exchange standard(STEP) have been suggested.

• 대한토목학회논문집
• /
• 제28권4D호
• /
• pp.553-560
• /
• 2008

건설산업의 생산성 향상 및 건설사업관리의 효율성 제고를 위해 국가차원에서의 건설 CALS/EC 표준을 개발한바 수자원 분야에서도 국가 전자도면 작성기준에 준한 표준체계의 개발이 필요한 시기이다. 따라서 본 연구에서는 국가 건설CALS/EC를 지원하기 위한 수자원분야 전자도면정보의 표준체계 개발전략을 수립하였다. 이를 위해, 수자원분야 공공기관의 건설사업관리시스템, 건설유지관리시스템, 도면작성기준서 등 건설관련 분야의 도면정보 표준, 국내 전자도면 작성표준과 ISO, 미국 NCS, 일본표준에서 포함하고 있는 도면표준을 분석하였다. 그 결과, 건설CALS/EC 지원을 위한 수자원분야 도면정보 표준의 기본적인 방향을 제안하였다. 실무적으로 표준체계를 적용하기 위해, 수자원 분야 공공기관의 현행 표준체계와도 연계되면서 국가 건설CALS/EC을 준수하도록 번호부여체계를 수립하였다. 따라서 본 연구는 건설CALS/EC을 지원하기 위한 수자원 분야의 기본적인 표준화 방향 및 번호부여 규칙을 제시하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.163-168
• /
• 2001

국내 건설산업 전반에서 건설도면 정보교환 표준이 존재하지 않는 관계로 건설 정보 교환 및 공유에 많은 문제들을 발생시키고 있다. 이러한 문제점을 해결하고 건설 정보를 효율적으로 공유하기 위해서는 국제 표준이며, 건설CALS 체계구축을 위한 표준화 기술인 STEP(STandard for the Exchange of Product model data) 표준의 적용이 필요하다. 이를 위해 본 연구에서는 기존의 건설도면 정보의 교환 및 공유에 대한 문제 해결 방안 제시와 국내외 건설도면 정보 표준화 연구 개발동향을 조사, 분석하여 STEP 표준의 적용 방안을 제시하였다. 또한, CALS/EC 건설도면 정보교환 표준(STEP)의 적용을 위한 검증과 인증 방안을 제시하였다.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.315-324
• /
• 2004

The purpose of this study is to suggest the way of automatic building code checking for architectural drawings in the web environment to enhance the utility of CALS/EC standard drawings and efficiency of construction industry business. To fulfil this aim, the authors seek to standardize the architectural drawing automatic checking system by linked drawing information to the STEP based CALS/EC standard format. Therefore, the automatic building code checking system can represent a way of utilizing the relationship between the construction CALS/EC standard drawings and the related study as well as improve the efficient of the construction work by sharing a variety of drawing information.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.124-130
• /
• 2009

In the multi-stage shape drawing process, the most important aspect for the economy is the correct design of the various drawing stage. For most of the products commonly available round or square materials can be used as initial material. However, special products should be pre-rolled. This study proposes a process design method of multi-stage shape drawing process for producing cross roller guide. Firstly, a standard classification of shape drawing process is suggested based on the requirement of pre-rolling process. And a design method is proposed to design the intermediate die shape. The process design method is applied to design the multi-stage shape drawing process for producing cross roller guide. Finally, the effectiveness of the proposed design method is verified by FE-analysis and shape drawing experiment.

• 소성∙가공
• /
• 제24권3호
• /
• pp.187-193
• /
• 2015

The objective of the current study is to determine cross-sectional profile of intermediate dies in order to improve the plastic strain homogeneity which directly affects not only the dimensional accuracy but also the mechanical properties of final product by redesigning the intermediate dies using the conventional electric field analysis (EFA) method. Initially, the multi-pass shape wire drawing was designed by using the equivalent potential lines from EFA. The area reduction ratio was calculated from the number of passes in multi-pass shape wire drawing but constrained by the capacity of the drawing machine and the drawing force. In order to compensate for a concentration of strain in a region of the cross section of the wire, the process for multi pass wire drawing from initial round material to an intermediate die was redesigned again using the electric field analysis. Both drawing process designs were simulated by the finite element method in which the strain distribution and standard deviation plastic strain of the cross section of drawn wires were examined.

• 한국지반공학회논문집
• /
• 제31권10호
• /
• pp.61-76
• /
• 2015

최근 지반공학 분야에서는 깊은기초와 얕은기초에 관한 한계상태설계법에 관한 연구가 선행되고 있으며, 옹벽구조물에 관한 연구는 미미한 실정이다. 본 연구는 철도 옹벽의 한계상태설계법을 도입하기 위한 기초 연구로써 옹벽 표준도의 파괴모드별 신뢰도지수가 목표신뢰도지수를 만족하는지를 평가하였으며, 옹벽 표준도에 대한 하중저항계수 설계를 수행함으로써 한계상태설계법의 적용성을 분석하였다. 철도 옹벽 표준도의 일부는 활동 및 지지력파괴에 대한 신뢰도지수가 목표신뢰도지수에 미달하며, 하중저항계수설계법에 의한 한계상태를 만족하지 못하여 한계상태설계 도입 시 철도 옹벽 표준도의 수정이 필요한 것으로 평가되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.382-386
• /
• 2001

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but Application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D Lay-Out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.470-475
• /
• 2008

Building Information Modeling(BIM) is rooted in the economic and functional advantages of maturing from paper-based 2D drawings. The paper-based design and construction drawings are typical production from BIM and using the drawing under BIM environment is needed because there is not an alternative media instead of paper-based drawings. However using the 2D drawing process based on 2D CAD for BIM environment directly has difficulties because there are significant differences in data structure between CAD and BIM. CAD is based on traditional drawings as a whole while BIM is focused on individual objects and providing various levels of information associated with the objects. It can be an obstacle to move from 2D CAD to BIM that we don't have a standard or guideline for BIM. Futhermore, the complexity of drawing in representation would be the obstacle too, so the solution is discussed in the research based on the case of Samoo Architects and Engineers.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.194-202
• /
• 2002

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D lay-out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape.