• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.5
• /
• pp.85-94
• /
• 2019

The modular apartment has been completed for the first time in Korea through the national research and development (R&D) project in December 2017, and 30 households moved in. Although conditions such as technicality and constructability have to be satisfied to adopt and spread the modular apartments in the future, economic feasibility is the most important factor among the conditions. The economic feasibility of modular apartments can be compared with that of existing reinforced concrete (RC) structure apartments. It is highly important to reduce the construction cost through standardization above all. The standardization refers to establishment of national design standards and principles, and it is important for manufacturers and building companies to comply with those standards and principles. The modular construction (MC) skill in Korea is at an early adoption stage and the MC market is not widely expanded yet. Thus, the application of the MC design, which is the basis of the standardization, has not been widely accepted. However, related R&D projects are now performing mainly by the Ministry of Land, Infrastructure, and Transport to promote modular apartments in recent years and the design standardization standard (draft) is now prepared to be notified as a result of the steady research. Furthermore, pilot complexes for demonstration purpose are under construction, starting from public rental apartments. Thus, MC method-applied public rental houses will be spread in near future. This study aims to investigate the current design status in the Ga-Yang Housing as a pilot modular complex to produce and supply more economical and efficient modular houses, and analyze the problems by comparing the design standardization standards with pre-notified design standardization standards and summarize the modifications between them thereby presenting foundational data for establishment of the design standardization in the modular business industry.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.43-52
• /
• 2010

It has applied the design method of face to face dimension, an MC (Modular Coordination) design method, at design steps of an apartment house for standardization of architecture. But It has been still using center line size. A construction limit isn't specific on these center line size, and dead space occurs with excessive gaps as size matching isn't performed well between structural sieve and parts. And above all, measurement before construction isn't to expect standardization, and to increase custom-made furniture. We investigate manufacture of a preferential domestic system kitchen and construction state, and we derive from a problem in viewpoints of standardization for this. And we utilized a reference plane, and we present construction document and design plan in order to solve these problems. And we analyze an effect got by application of the assembly basis aspect that we presented, and we can raise efficiency of standardization of housing and construction industry, and we light ultimately up.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.175-184
• /
• 2005

With the rapid progress of the aging society in Korea, the silver generation is emerging as another class of users in the new population structure. This is a social issue to be dealt with, and the effect of such a change is being observed dearly in the design area. In addition, there are increasing demands for consideration of minor groups of users including the elderly, the disabled, the left-handed, children and pregnant women and nursing mothers, who have been treated as the weak. Such a human-centered idea may be the manifestation of the recovery of humanity and the self-realization of human beings through experiences and reflections of the industrial society of the past. The present study examined the tendency of design standardization centering on universal design, which has emerged in response to user-centered social needs, and suggested general considerations for the necessity of introducing such standards. These days the meanings of standardization are not limited to quality, performance, safety and economic aspect. Standardization is required to consider the diversity and the welfare of human beings. In addition, one of the important functions of standardization is to provide designers with important clues and guidelines for designing. In reality, however, standardization has been rejected by the circle of design for the reason that it deters free creation, so research on the introduction of standardization has been at standstill. As ISO/IEC Guide71 was published in November 2001, based on which, the Korea Standards Association established KS A ISO/IEC Guide71 without changing its contents. In companies' manufacturing activities, the progress of standardization in connection to universal design is growing more important. However, usefulness and interchangeability for the absolute majority resulting from standardization are incomparable. Lastly, the realization of universal design requires human-centered design mind, based on users' experiences and needs, the characteristics of the human bodies and inconvenient elements rather than standards for the sake of standardization.

• KCID journal
• /
• v.21 no.1
• /
• pp.109-117
• /
• 2014

Multi water-loop system is the efficient customer centered facilities of water supply by utilizing the multi water resources. Multi water-loop system is divided into various types. The system is classified potable and non-potable type. Mostly, the potable type utilizes surface water and ground water. However, the non-potable type utilize the multi water resources, such as rain water, sea water, reclaimed water, etc. Selective intake is possible when characteristics of region, physiographic condition and purpose of use are considered. For instance, downtown type, new-city type, agriculture type, island type are available. For development and application of these multi water-loop system, standardization is needed. For standardization, several methods are given; design principles, selection and composition method of multi water-loop system structure, BIM/GIS application method, safety inspection method. Consequently, a road map of design standardization method can be established. In this road map, there are three parts for the standardization of multi water-loop system. Three parts are the considerations, base material and ways of standardization. Design standardization become close when this road map followed by someone who plan the multi water-loop system. In this way, loop system's development is more efficient and economic. In hereafter research, each type's characteristic will be analysed and standardization methods can be established.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.111-115
• /
• 2002

CAD System, which has been actively applied since late 80's, has become one of the most important tools in architectural design and has taken the central position in practical design processes. However, it is widely known that AutoCAD, the market-leading general-use CAD System, resulted in hindering the standardization of CAD System. This has been causing problems in communication among designers and inefficiency in their uses. The standardization in CAD System becomes an urgent issue. The study attempts to build up fundamental principles in standardization of CAD System, and to suggest a combinational model of international and domestic standards.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.448-451
• /
• 2008

This study is under doing to suggest application manual using assembling reference plane design & standard finish material basis upon material classification code as a tool of a linkage between building design and construction standarization in order to enlarge the applicability of house building material that is produced by the module plant. We can say the goal of building standardization intend not only the improvement of construction productibility but also guarantee of subsequent performance through automatization basis upon informationalization of building design. For a etabilishing of this condition, it is neccessary to link the standardization's result of material--design--construction field. According to this neccessity, we are going to suggest information factor that can make relative business manager easily approach to the standardization practical task.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.53-60
• /
• 2010

Built-in wardrobe is constructing after ordering and making, because built-in wardrobe's size is fixed as housing measurement. It is hard to speak built-in wardrobe components of construction in these ways, and application of an MC (Modular Coordination) design system is meaningless too. And above all, measurement before construction isn't to expect standardization, and to increase custom-made furniture. So I suggest the standardization of built-in wardrobe utilizing standard last finish and reference plane in order to prevent an evil influence of built-in wardrobe's construction. And we utilized a reference plane, and we present construction document and design plan in order to solve these problems. The first stage, we investigate manufacture of a preferential domestic system kitchen and construction state, and we derive from a problem in viewpoints of standardization for this. And we analyze an effect got by application of the assembly basis aspect that we presented, and we can raise efficiency of standardization of housing and construction industry, and we light ultimately up. I will apply a standardization plan as above, and define that this assures a standardization of components and an economic effect.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.103-110
• /
• 2016

PURPOSES: In this paper, the effectiveness of speed-maintained standardization in road geometry on environmental impact at a downward slope location, based on greenhouse gas (GHG) emission indicators, was studied. Specifically, the aim of this study was to ascertain whether speed-maintained standardization resulted in decreased $CO_2$ emissions as well as noise pollution, due to reduced vehicle speeds. METHODS : In this study, speed-maintained standardization in road geometry was proposed as a means to reduce vehicle speeds, with a view to reducing $CO_2$ emissions and noise pollution. This technique was applied at a downward slope location. The vehicle speeds, $CO_2$ emissions, and noise levels before and after application of speed-maintained standardization were compared. RESULTS: It was found that speed-maintained standardization was effective as a means to reduce speed, as well as $CO_2$ emissions and noise pollution. By applying speed-maintained standardization, it was confirmed that vehicle speeds were reduced consistently. As a result, $CO_2$ emissions and noise levels were decreased by 9% and 11%, respectively. CONCLUSIONS : This study confirmed that speed-maintained standardization in road geometry is effective in reducing vehicle speeds, $CO_2$ emissions, and noise levels. Moreover, there is further scope for the application of this method in the design of roads in urban and rural areas, as well as in the design of highways.

• Archives of design research
• /
• v.12 no.2
• /
• pp.121-130
• /
• 1999

The purpose of this study is to provide standardization on the examination that could measure students' diagrammatic creativity at design college. For this purpose, we tested college students, who was selected by educational system, regional, and grade groups to use the examination, and suggested the standardization criterion by analyzing these data. The data analysis procedures of this study consist of three step, the first that was to investigate the goodness of the examination paper, second step was to measure the reliability and the validity for the goodness of questions, the last step was to suggest the standardize scores for standardization on the examination. The results of the goodness and standardization analysis showed three structural factors(fluency, flexibility, originality) of this examination were proper to measure the diagrammatic creativity, and the proposed examination tool seemed to be good enough to apply in practice.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.6
• /
• pp.31-37
• /
• 2018

With the progress of national policy researches on the modular construction, many studies have been conducted regarding the standardization of interior building materials. However, studies on the standardization of exterior building materials are still insufficient, and there are no dedicated exterior materials for modular construction. In this regard, this study investigated the necessary of standardization through the analysis on 7 kinds of exterior materials used in general buildings and exterior building materials applied to modular apartment houses in order to establish design criteria for the standardization of dedicated modular exterior materials. Based on the analysis results, assembly reference plane in conjunction with inside dimensions was set, and panelizing standardized in five parts was proposed to solve the problem of low exterior material standardization rate. It also proposed elastic gasket and steel bracket details that can compensate for the fabrication errors of unit boxes and construction errors in stacking.