• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.1
• /
• pp.27-33
• /
• 2009

Human postural responses appeared to have stereotyped modality, such as ankle mode, knee mode and hip mode in response to various perturbations. We examined whether human postural control gain of full-state feedback could be decoupled along with the eigenvector. To verify the model, postural responses subjected to fast backward perturbation were used. Upright posture was modeled as 3-segment inverted pendulum incorporated with feedback control, and joint torques were calculated using inverse dynamics. Postural modalities such as ankle, knee and hip mode were obtained from eigenvectors of biomechanical model. As oppose to the full-state feedback control, independent eigenvector control assumes that modal control input is determined by the linear combination of corresponding modality. We used optimization method to obtain and compare the feedback gains for both independent eigenvector control and full-state feedback control. As a result, we found that simulation result of eigenvector feedback was not competitive in comparison with that of full-state feedback control. This implies that the CNS would make use of full-state body information to generate compensative joint torques.

• 전기의세계
• /
• v.31 no.1
• /
• pp.43-49
• /
• 1982

This paper intends to compare and illustrate the feedback effects of the state feedback scheme to a positional control system by the use of the state observer. As a case study, the dynamic properties of a proposed positional control system lie derived, first, and the design of an optimal state feedback control system by the actual states is intended as a primary case study. For the illustration of the feedback effects with the asymptotic state observer, unobservability of some state variables are assumed and an optimal state feedback design is carried by using the estimated states which is reconstructed through the observer. That is, when some of the states of the system to be controlled are not avalable, an observer is constructed to estimate the unaccessable states. Adigital computer is used for the comparative study of the feedback effects in both cases. The resultant response of the proposed system have shown quite reasonable satisfaction oncontrol quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.206-209
• /
• 1988

For feedback control of a linear dynamic system the optimum linear slace regulator (OLSR) can be implemented only if all state are available for feedback. This work demonstrates that when only the output state is available for feedback, a nonlinear controllers can be improved performance over that obtained by a proportional controller. This paper found the optimal control law by well-known dynamic programming and principles of optimality. Thus, performance of both proportional and nonlinear controllers is compared with performance of optimum linear state regulator.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.653-659
• /
• 2006

The design of $H_2$-optimal control with regional pole assignment via state feedback in linear time-invariant systems is investigated. The aim is to find a state feedback controller such that the closed-loop system has the desired eigenvalues lying in some desired stable regions and attenuates the disturbance between the output vector and the disturbance vector. Based on a proposed result of parametric eigenstructure assignment via state feedback in linear systems, the considered $H_2$-optimal control problem is changed into a minimization problem with certain constraints, and a simple and effective algorithm is proposed for this considered problem. A numerical example and its simulation results show the simplicity and effectiveness of this proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.438-443
• /
• 2003

In this paper, we propose a control algorithm for two-wheel mobile robot that can move the rider to his or her command and autonomously keep its balance. The control algorithm is based on a mixed $H_2/H_{\infty}$ control scheme. In this control problem the main issue is to move the rider while keeping its balance in the presence of disturbances and parameter uncertainties. The disturbance force caused by uneven road surfaces and the uncertainty due to different rider's heights are considered. To this end we first consider a state feedback controller as a basic framework. Secondly, we obtain the state feedback gain $K_2$ minimizing the $H_2$ norm and the state feedback gain $K_{\infty}$ minimizing the $H_{\infty}$ norm over the whole range of parameter uncertainty. Finally, we select mixed $H_2$/$H_{\infty}$ state feedback controller K as the geometric mean of $K_2$ and $K_{\infty}$. Simulation results show that the mixed $H_2/H_{\infty}$ state feedback controller combines the effects of the optimal $H_2$ state feedback controller and robust $H_{\infty}$ controller state feedback controller efficiently in the presence of disturbance and parameter uncertainty.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.690-693
• /
• 2005

In this paper, a hybrid PD-servo state feedback control algorithm for swing up inverted pendulum system is proposed. It consists of two parts. The first part is the PD position control for swinging up the pendulum from the natural pendent position to around the upright position and the second part is the servo state feedback control for stabilizing the inverted pendulum in upright position. The first controller is PD controller and it is tuned to control the position of the pendulum by moving the cart back and forth until the pendulum swings up around the upright position. Then the second controller will be switched to stabilize the inverted pendulum in its upright position. The controller in this stage is the servo state feedback controller designed by pole placement. Experimental results of PD type swinging up control system, of stabilizing servo state feedback control system and of the proposed hybrid PD-servo state feedback control system to swing up and stabilize inverted pendulum show that the proposed method is effective and reliable for actual implementation while it is simple.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.980-983
• /
• 1996

This paper presents the method of determining state feedback gains of XPTOS for disk drive servomechanism based BESSEL filter prototype. A typical disk drive actuator can be modeled as second order dynamics for low frequencies. However, the response at higher frequencies shows resonant behavior which cannot be easily modeled. XPTOS consists of the nonlinear control region and the linear control region. In the linear control region, the poles of a second order nominal model of plant must be properly relocated by pole placement technique to attenuate resonant modes at high frequency and to attain minimum time state transition. It is difficult to select position to satisfy this object because velocity feedback gain is subjected to position feedback gain in XPTOS. Here poles of BESSEL filter prototype are selected to determine state feedback gains of XPTOS. Simulation results for disk drive servomechanism using XPTOS having state feedback gains by the proposed method are presented.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.915-920
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_{2}-gain$ from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.11
• /
• pp.59-65
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_2$-gain from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.498-504
• /
• 1998

This paper presents an optimal control algorithm for the overhead crane. To control the swing motion and the position tracking of the payload of the overhead crane a state feedback control algorithm is applied. by using a hybrid genetic algorithm the feedback gains of the state feedback is optimized to minimize the cost function composed of position errors and payload swing angle under unknown constant disturbances. Computer simulation is performed to demonstrate the effectiveness of the proposed control algorithm.