• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.657-658
• /
• 2008

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2047-2054
• /
• 1997

This paper describes a measuring method of vibration mode shapes by the Electronic Shearography. This method called the speckle interferometer has many merits in practical use, such as low sensitivity to environmental noise, low limit of coherent-length and simple optical configuration. In this study, we developed Michelson-type shearing interferometer provided with a phase stepping mirror and with a bias modulation mirror to quantify the vibration gradient fields. Results of application to a simple cantilever plate show that the vibration amplitude fields obtained are in good agreement with those of the electronic speckle pattern interferometry (ESPI).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.432-438
• /
• 1994

This paper describes the measuring method of vibration mode shapes by the Electronic Shearography. Shearographic interferometer has many merits in practical use, that is low sensitive to the environmental noisy, liw limit of the coherent-length and simple optical configuration etc.. In this study, we developed Michelson-type shearing interferometer provided with a phase stepping mirror and with a bias modulation mirror to quantify the vibration gradient fields. As a results of application to a simple cantilever plate vibration amplitude fields were obtained by the proper integration technique, and their exprimental results were in good agreement with those of the ESPI experiment.

• Publications of The Korean Astronomical Society
• /
• v.13 no.1 s.14
• /
• pp.85-98
• /
• 1998

In this paper we describe MS-TCS, the telescope control system which was developed in Korea Astronomy Observatory. MS-TCS can control an equatorial type telescope equipped with stepping motors and incremental type optical encoders. MS-TCS consists of (1) POINT_TEL which is the program roning in a PC and (2) TCS-196 which is the electroics board to control the telescope. The communication between the PC and TCS-l96 is done through RS-232 or RS-422 serial line. MS-TCS can control the secondary mirror and dome. It also provide network function using TCP/IP for remote control of the telescope. MS-TCS is suitable for controlling medium to small size telescope for research and education.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.273-276
• /
• 1997

Seeing is an intelligent act. Retina is the most important part among the components of eye which is comprised of iris, pupil, lens, optic disk, and so forth. Because retina acts like a photo receiver to detect light from every object, if damaged, animals have a severe problem to live along with themselves and sometimes they lose their sight. In the ophthalmology, doctors use special instrument to see exact retina image of object and operate the surgery by rotating focus control knob. In this study, a basic test is done to achieve the auto focus control instrument. Specially made sledge and attenuator are installed on the optic bed to change the distance and laser power between the first reflective mirror and the second one. Control panel which is compiled by Visual C t t to control stepping motors ,laser power and photodiode are implemented with ADA-board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1225-1230
• /
• 2017

3D printers have been growing mainly in industrial use, but the recent growth of the personal 3D printer market advanced through economic effects and cost reduction due to technological development. However, current 3D personal printers are very low in customer satisfaction on the limitations of molding speed, size, and precision. In this paper, we propose SLA 3D printer using LSU to overcome the technical limitation of personal 3D printer. In order to verify the operation of the scanning mechanism which is responsible for core functions, the movement of molding board using stepping motor and laser output test was conducted. These tests ensure that the laser was operating and control well was confirmed that a certain point is output to the X-axis by means of a laser module and a polygon mirror. 3D printers which are proposed to improve the accuracy and manufacturing speed is expected to replace the traditional low-budget 3D printer.