• 제목/요약/키워드: Straight-Line Method

검색결과 367건 처리시간 0.029초

구조해석에 의한 디지털 곡선의 분리 (Segmentation of Digital Curves by Structural Analysis)

  • 류승필;권오석;김태균
    • 대한전자공학회논문지
    • /
    • 제26권12호
    • /
    • pp.1984-1994
    • /
    • 1989
  • Techniques for approximating digitalcurves by polygonal lines are a valuable tool for image analysis and data compression. S. Shilien proposed a method for segmenting a digital curve into digital straight line segments digital straight line segments which are not satisfied with the structural properties, and have more than one break point by Shilien's method. Here, the structural representation of digital straight lines and digital staight line segments is described. And a method for segmenting a digital curve into digital straight line segments which are not satisfied with the structural properties, and have more than one break point by Shilien's method. Here, the structural representation of digital straight lines and digital staight line segments is described. And a method for segmenting a digital curve into digital straight line segments which may be not satisfied with the structural properties is proposed. The number of break points extracted by this method is less than that by S. Shilien's method from the digital curve which includes the digital straight line segments not satisfied with the structural properties.

  • PDF

Shallow ground treatment by a combined air booster and straight-line vacuum preloading method: A case study

  • Feng, Shuangxi;Lei, Huayang;Ding, Xiaodong;Zheng, Gang;Jin, Yawei
    • Geomechanics and Engineering
    • /
    • 제24권2호
    • /
    • pp.129-141
    • /
    • 2021
  • The vacuum preloading method has been used in many countries for soil improvement and land reclamation. However, the treatment time is long and the improvement effect is poor for the straight-line vacuum preloading method. To alleviate such problems, a novel combined air booster and straight-line vacuum preloading method for shallow ground treatment is proposed in this study. Two types of traditional vacuum preloading and combined air booster and straight-line vacuum preloading tests were conducted and monitored in the field. In both tests, the depth of prefabricated vertical drains (PVDs) is 4.5m, the distance between PVDs is 0.8m, and the vacuum preloading time is 60 days. The prominent difference between the two methods is when the preloading time is 45 days, the injection pressure of 250 kPa is adopted for combined air booster and straight-line vacuum preloading test to inject air into the ground. Based on the monitoring data, this paper systematically studied the mechanical parameters, hydraulic conductivity, pore water pressure, settlement and subsoil bearing capacity, as determined by the vane shear strength, to demonstrate that the air-pressurizing system can improve the consolidation. The consolidation time decreased by 15 days, the pore water pressure decreased to 60.49%, and the settlement and vane shear strengths increased by 45.31% and 6.29%, respectively, at the surface. These results demonstrate the validity of the combined air booster and straight-line vacuum preloading method. Compared with the traditional vacuum preloading, the combined air booster and straight-line vacuum preloading method has better reinforcement effect. In addition, an estimation method for evaluating the average degree of consolidation and an empirical formula for evaluating the subsoil bearing capacity are proposed to assist in engineering decision making.

편측성 불완전 구순열의 직선 봉합법에 의한 수복 - 증례 보고 및 문헌고찰 (The Straight Line Repair for Unilateral Incomplete Cleft Lip - Cases report and journal review)

  • 김학균;김재진;김은석
    • 대한구순구개열학회지
    • /
    • 제11권2호
    • /
    • pp.77-82
    • /
    • 2008
  • The harmonious lip length, residual scar and Cupid's bow width and peak with a normal side are the aims of a unilateral cleft lip repair. Also, long term amelioration without necessary of revisional surgeries may be the ideal conditions. No one method can satisfy the wide varieties of cleft lip deformities. Recently with rearrangement of paraoral muscle and some modifications, a straight line repair technique has been concerned again. Straight scar line, simplicity, and short learning curve are the advantages of the straight line technique. Here two cases of the simple straight line technique were presented and discussed for its usefulness and reliability with short reviews of previous reports.

  • PDF

하모닉 코더를 위한 직선과 이산코사인변환 (DCT)을 이용한 하모닉 크기값 (Magnitude) 양자화 기법 (Method of Harmonic Magnitude Quantization for Harmonic Coder Using the Straight Line and DCT (Discrete Cosine Transform))

  • 최지욱;정규혁;이인성
    • 한국음향학회지
    • /
    • 제27권4호
    • /
    • pp.200-206
    • /
    • 2008
  • 본 논문은 음성신호의 주파수를 반으로 나누어 양자화 계수 추출에 직선과 DCT (Discrete Cosine Transform)를 혼합하여 사용한 양자화 기법을 제안한다. 하모닉 부호화기에서의 하모닉은 가변이므로 저주파에서의 하모닉만을 오버샘플링하여 차원을 고정한다. 고정된 차원의 스펙트럼 포락선을 직선으로 표현한 후 직선이 불연속인 주파수에서의 샘플값만을 전송한다. 이 논문에서는 저주파에서의 하모닉은 복원을 위해 고정된 직선의 계수를 사용하였고 고주파에서의 하모닉은 가변 DCT를 적용하여 직선과 DCT가 격합된 형태의 양자화기법을 제안한다. 제안된 양자화 기법의 성능평가는 스펙트럴의 크기값에 대한 Spectral Distortion (SD)값을 사용하였다. 실험결과 HVXC보다 제안된 양자화 기법의 SD가 0.3dB 정도 개선되었다.

전달강성계수법에 의한 직선형 구조물의 시간 이력응답 해석알고리즘에 관한 연구 (A Study on the Analysis Algorithm of Time Historical Response of Straight-line Structure by the Transfer Stiffness Coefficient Method)

  • 문덕홍;강현석;최명수
    • 동력기계공학회지
    • /
    • 제3권1호
    • /
    • pp.74-79
    • /
    • 1999
  • This paper describes formulation for algorithm of time historical response analysis of vibration for straight-line structure. This method is derived from a combination of the transfer stiffness coefficient method and the Newmark method. And this present method improves the computational accuracy of the transient vibration response analysis remarkably owing to several advantages of the transfer stiffness coefficient method. We regarded the structure as a lumped mass system here. The analysis algorithm for the time historical response was formulated for the straight-line structure containing crooked, tree type system. The validity of the present method compared with the transfer matrix method and the Finite Element Method for transient vibration analysis is demonstrated through the numerical computations.

  • PDF

A Study of Hair Damage by Magic Straight Perm

  • Lim, Sun-Nye
    • Applied Microscopy
    • /
    • 제42권3호
    • /
    • pp.129-135
    • /
    • 2012
  • In this study, the changes in hair quality before and after Magic straight perm have been evaluated through a hair damage measurement method. For this, a healthy high school student's (age18 years) wavy hair was selected and permed on the left and right sides. Then, the changes caused by physical methods which were applied during the fl at iron-based Magic straight perm were evaluated based on the hair damage measurement method before and after the Magic straight perm. According to the protein release test after the Magic straight perm, 1.26% in average and 0.14% was observed in Cool Magic straight perm sample. In a field emission scanning electron microscopy (FE-SEM) test, saw teeth-shaped partial desquamation of cuticle cells and impurities were observed in the warm-treated hair sample. In atomic force microscope (AFM), line-profile is a method to represent roughness data on hair. According to analysis on 3-dimensional (3D) images, the hair with Cool Magic straight perm was lower than the hair with Warm Magic perm in terms of the color change of 3D images. In addition, vertical changes were observed in the hair with Cool Magic perm. As a result, irregular surface roughness was observed. This study proposed a method to minimize hair damage by cooling down the heat with the cool hair straightener as soon as the Warm Magic was finished.

가상 직선 모델을 사용한 일반적 VLSI 배선의 신호의 무결성 검증 ((Signal Integrity Verification of a General VLSI Interconnects using Virtual-Straight Line Model))

  • 진우진;어영선;심종인
    • 전자공학회논문지SC
    • /
    • 제39권2호
    • /
    • pp.146-156
    • /
    • 2002
  • 이 논문에서는 불규칙한 배선 구조에 대한 가상직선(virtual-straight line) 파라미터 추출 방법과 이를 이용한 새롭고 빠른 시간 영역에서의 시뮬레이션 방법론을 보이고 검증한다. 비선형인 트랜지스터의 특성을 고려한 인터컨넥트 회로의 시간영역에서의 신호응답은 모델차수감소법(model order reduction method)을 사용하여 수행된다. 모델차수감소법은 인터컨넥트 회로의 단위길이당 파라미터를 이용하므로 인터컨넥트의 길이가 서로 다르고 불규칙한 형태를 갖는 인터컨넥트에 대해서 직접적으로 모델차수감소법을 적용하기 위해 가상직선 모델을 사용하여 인터컨넥트의 파라미터를 추출한다. 또한 모델차수감소법은 일반적인 Berkeley SPICE의 모듈로 구성하여 인터컨넥트 회로의 시간영역 시간응답을 구하였으며 일반적인 회로 시뮬레이터인 HSPICE의 시뮬레이션 결과와 비교하여 잘 일치한다는 것을 보인다. 제안된 방법은 복잡한 다층 배선 구조에 대한 신속하고 정확한 시간영역 신호응답을 제공함으로써 고성능 VLSI 회로 설계에 유용하게 적용할 수 있다.

하악 절치의 근관계에 관한 연구 (THE CANAL SYSTEM OF MANDIBULAR INCISORS)

  • 임은미;최호영;박상진;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제27권4호
    • /
    • pp.432-440
    • /
    • 2002
  • The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth there radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal. A line was drawn connecting these two points extending through the crown of the tooth. The point at which the line crossed the external crown surface was recorded as facial, incisal, lingual. Degree of root curvature was determined by Schneider Protractor Method. Both section method and clearing method were used in this study. By section method, 100 mandibular incisors were embedded in clear resin and transeverse serial sectioned at 0.5, 1.0, 2.0, 3.0, 4.0, 5.0mm level from root apex. The resected surfaces were stained by methylene blue and examined under $\times$40 magnification with a stereomicroscope. By clearing method, 100 mandibular incisors were cleared in methysalicylate after decalcification with 10% nitric acid and evaluated under $\times$18 magnification with a stereomicroscope. The results were as follows ; 1. 29% had the center of the plotted straight-line access facial to incisal edge, whereas 71% had straight-line access at the incisal edge. When incisal wear classified as extensive, the straight-line access was plotted on the incisal edge 95.5%. When incisal wear classified as slight/none, the straight-line access was plotted on the facial 65.9%. 2. Degree of curvature of main canal was straight or almost straight, and only 10% in buccolingual direction had a degree of curvature greater than 20 degrees and 5.5% in mesiodistal direction had. 3. In section method, canal configuration analysis showed that 51% of the specimen classified as type I, 27% as type II, 12% as type III, 10% as type IV. For theses setions with two canals, the incidence of an isthmus was 36.7%, 64.3%, 79.2%, 96.3%, 97.4%, 97.6% at each level and highest in 3~5mm sections. 4. In clearing method, canal configuration analysis showed that 74% of the specimen classified as type I, 11% as type II, 6% as type III, 9% as type IV. These results suggested that traditional access from lingual should be moved as far toward the incisal as possible to locate and debride the lingual canal and root canal system should be cleaned, shaped completely and obturated three dimensionally for successful endodontic treatment.

현장 열응답시험과 현장 대수성시험결과를 동시 분석 가능한 통합전산 Program에 관한 연구 (A Study on the Integrated Computer Program for the Multi Analysis of In-Situ Aquifer and Geothermal Response Test)

  • 한정상;한혁상;윤운상
    • 한국지열·수열에너지학회논문집
    • /
    • 제4권1호
    • /
    • pp.11-19
    • /
    • 2008
  • Groundwater flow in confined aquifer and heat transport in underground geologic media are using same governing equation(line source) like well fuction. Therefore the conventional slope method using only later data obtained from in-situ thermal response test to determine the thermal conductivity of vertical geothermal heat exchanger(GHEX) is basically identical with one of Theis straight line method of aquifer test under artesian condition. In case that the pumping rate(Q, $m^3$/d) and drawdown(s,m) which are used for input data of existing hydrogeologic computer programs for aquifer test are replaced and converted to supplying heat energy per unit length of bore hole(Q/L,w/m or Kcal/h.m) and temperatures (T,$^{\circ}C$)measured at in and out-let of GHEX as in put data respectively, thermal conductivity around geothermal heat exchanger can be easily estimated without any special modification of the existing hydrogeologic computer program. Two numbers of time series temperature variation data obtained from in situ geothermal response test are analized using Theismethods(standard curve and straight line method) by using existing aquifer test program and conventional Slope method proposed by ASHRAE. The results show that thermal conductivity values estimated by two straight methods are identical and the difference of estimated values between standard curve methods and Slope method are also within acceptable ranges. In general,the thermal conductivity estimated from Theis straight linemethod gives more accurate value than the one of Slope method due to that Slope method uses only visual matching otherwise Theis method uses automatic curve matching estimation with reducing RSS.

  • PDF

회전하는 강체허브에서 전개하는 보 끝단의 직선궤적오차 저감 (Straight-line Path Error Reduction for the End of a Flexible Beam Deploying from a Rotating Rigid Hub)

  • 김병진;김형래;정진태
    • 한국소음진동공학회논문집
    • /
    • 제24권11호
    • /
    • pp.898-906
    • /
    • 2014
  • This paper presents a reduction method for a straight-line path error of a flexible beam deploying from a rotating rigid hub. Previous studies discussed about only vibration phenomena of flexible beams deploying from rotating hubs; however, this study investigates a vibration reduction of a rotating beam with variable length. The equation of motion and associated boundary conditions are derived for a flexible beam deploying from a rotating rigid hub, and then they are transformed to a variational equation. By applying the Galerkin method, the discretized equations are obtained from the variational equation. Based on the discretized equations, the dynamic responses of a rotating/deploying beam are analyzed when the beam end has a straight line motion. A reduction method for the trajectory error is proposed, using the average length of a rotating/deploying beam. It is shown that the proposed method is able to reduce the residual vibration of a rotating/deploying beam.