• 대한전자공학회논문지
• /
• 제9권2호
• /
• pp.1-16
• /
• 1972

본논문은 특성임퍼이던스가 선형적으로 변화하는 단일 Strip선로의 특성파라미터를 이용하여, 우선 even-mode 및 odd-mode임피이던스가 모두 선형적으로 변화하는 비대칭형인 결합Strip선로의 특성파라미터를 구하였다. 다음에는 상기한 비대칭결합Strip선로를 종속연결한 대칭형결합Strip선로를 구성하고, 선로단자조건에 따라서 결합Strip선로가 갖는 여파특성을 고찰하였다. 선형 결합Strip선로의 특성을 해석한 결과, 선형결합Strip선로는 균일Strip선로를 사용하는 경우에 비하여 몇가지 점에서 좋은 여파특성을 갖고 있음을 명시하였다.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.127-132
• /
• 2004

It is very important to find out causes of strip pinching for the high quality of products and fer the stable operation of rolling system. We have examined the strip pinching from three points of view to find out the causes of strip pinching in rolling system: strip shape, rolling operation conditions, and behavior of strip. Wedge, off center, and difference of rolling force through CMD(Cross machine direction) are found to possibly provide major initial causes of strip pinching. Generally strip pinching occurred in the tail of strip. Thus, computer simulations by using a FEM code were also carried out to find out the initial mechanism of strip pinching depending upon the force and geometric boundary conditions at the time of strip tail rolling. The strong compression force effect due to the sudden release of strip tail from the work roll and non-uniform strip tail shape (ex. Fish tail) across the CMD were found to provide possible major causes of strip pinching.

• 소성∙가공
• /
• 제8권1호
• /
• pp.78-91
• /
• 1999

The endless hot rolling has been focused as an innovative process technology for increasing the productivity drastically and reducing the imperfection of quality in hot rolled steel strip. To realize it in actual mill, a lots of new facilities such as bar coiler, movable LASER welder and high speed strip shear should be equipped. And also it is necessary to develop the control technique for changing the roll gap and rolling speed during rolling, which is named as Flying Gap and Speed Change control technology. To prevent a strip rupture caused by excessive tension, it is very important to minimize fluctuations in strip thickness and intension during FGSC control. In this paper, the mathematical model for FGSC control algorithm was suggested and dynamic simulation is performed to accertain the effect of suggested control method on fluctuations in strip thickness and tension. For endless hot rolling simulation, a lots of FGSC control situations, for instance - strip thickness change from strip to strip - strip width change from strip to strip - carbon content change from strip to strip are considered.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.423-428
• /
• 1999

A high precision hot strip width control method has been developed in this study by applying interstand looper tension measuring system at finishing mill stands. As with deviation of hot rolled steel strip is closely related to abnormal increase in the interstand strip tension, on-line measuring device of looped tension and data analyzing system was developed in this study. To determine dominant factors that will cause local width shortage, the logged data sets of bar width, bar thickness, looper tension, and strip thickness along the strip length were correlated with the data set of strip width change. With the result of the correlation analysis, existing sequence control logic and parameters for looper actuator were modified for strip width quality and the gains of the looper control were refined for the stable operation during the full passage of rolled strip. The on-line tension measurement and tension feedback control for looper system improved strip travelling stability and reduced strip width deviation in the srip top end region.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.544-548
• /
• 2008

반도체 공정에서 가장 많은 시간과 비용을 차지하는 공정 중 하나는 Photoresist strip 공정이다. 따라서 보다 빠르게 PR의 strip 공정을 단축하기 위한 연구가 계속 진행중에 있다. 하지만 기존 사용중인 strip용액을 대체하기 위한 물질을 찾는 것은 많은 비용을 수반한다. 본 연구에서는 PR의 strip 시간을 최대한 단축시키고 PR strip 잔여물의 빠른 제거를 위하여 기존 공정에서 사용 중인 strip 약액을 플라즈마에 의하여 활성화하는 방법(Plasma Liquid-Vapor Activation: PLVA)으로 PR strip 시간을 최대한 줄이는 방법에 대한 연구를 진행하였으며, 활성화된 strip용액이 더욱 빠른 strip율 성능을 나타내는 것을 확인하였다. 또한 PR strip에서 이온에 의한 영향을 받은 HDI-PR (high dose implanted photoresist)은 기존 strip용액으로 제거가 불가능하였다. 하지만 본 연구에서 제시한 PLVA 방법으로 활성화된 용액에서는 그 가능성을 확인하였고, 이러한 PLVA방법에 대한 물리적 연구를 위하여 HDI-PR 표면 내력의 변화를 측정하였다. 그 결과 PLVA 처리 전 후 HDI-PR의 표면 내력에 큰 변화를 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.169-169
• /
• 2000

The modeling for the looper of a hot strip finishing mill to control the tension of the strip is presented. The looper is an arm pushing against the strip between stands in a tandem mill to keep the strip tension constant and to isolate the interactions of the adjacent stands. Tension is influenced by the difference in mass flow through the up stream and down-stream rolling stands. Tension is critical to strip quality, influencing width, gauge, and shape. This paper presents how looper angle and strip tension are controlled for a hot strip finishing mill.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1091-1096
• /
• 2003

It is very important to find out causes of strip pinching for the high quality of products and for the stable operation of hot roiling system. We have examined the strip pinching from three points of view to find out the causes of strip pinching in hot rolling system: strip shape, rolling operation conditions, and behavior of strip. Wedge, off center, and difference of rolling force through CMD are found to possibly provide major initial causes of strip pinching. Generally strip pinching occurred in the tail of strip. Thus, computer simulations by using a FEM code were also carried out to find out the initial mechanism of strip pinching depending upon the force and geometric boundary conditions at the time of strip tail rolling. The strong compression force effect due to the sudden release of strip tail from the work roll and non-uniform strip tail shape (ex. Tongue tail) across the CMD were found to provide possible major causes of strip pinching.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.322-325
• /
• 2002

We describe the looper controller design for a hot strip mill. The looper is to control the strip tension which influences on the width of the strip. It is very important to control the looper control of the hot strip mill, but difficult to control the looper, because there exists on mutual interaction among strip gauge, looper angle, and strip tension. In this paper, we present the modeling for the hot strip finishing mill to control the tension of the strip and suggest a cross control method. The cross control is a very simple method that allows non-interacting control.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.242-242
• /
• 2008

반도체 공정에서 일정한 패턴을 만들기 위하여 Photoresist (PR)를 이용한 식각 공정을 사용하게 된다. 이러한 식각 공정은 반도체 직접도가 증가되면서 더욱 많은 단계의 공정을 요구하게 되었다. 그러나 식각 공정의 증가는 반도체 소자 생산을 위한 더 많은 시간과 비용을 요구하게 된다. 이를 해결하기 위하여 Photoresist를 사용하지 않은 공정으로 공정 단계를 간소화하기 위한 연구를 진행하고 있지만 아직 명확한 대한은 없다. 본 연구에서 는 PR의 strip 시간을 최대한 단축시키고 PR strip 잔여물의 빠른 제거를 위하여 기존 공정에서 사용 중인 strip 약 액을 플라즈마에 의하여 활성화하는 방법으로 PR strip 시간을 최대한 줄이는 방법에 대한 연구를 진행하였으며, 활성화된 strip용액이 더욱 빠른 strip율을 나타내는 것을 확인하였다. 또한 약액 활성화 방법으로 활성화된 strip 용액으로 PR을 일부 제거한 후 PR 표면의 물리적 특성 변화를 분석하여 약액 활성화된 strip 용액으로 인한 PR의 특성을 물리적 방법으로 접근하여 연구를 진행하였다.