• 청정기술
• /
• 제24권3호
• /
• pp.175-182
• /
• 2018

본 연구에서는 유동박리공정에서 개발된 수계박리액의 수분함유량의 최적화를 통한 청정성을 연구하였다. 감광제 박리 특성을 상용 유기계 박리액과 비교 고찰하였다. 박리성능은 감광제의 패터닝 전 투명전극샘플과 코팅된 샘플을 박리 한 후의 투명전극표면에서의 전기 및 광학적 특성의 평가를 통해 비교 하였다. 상용화된 유기계 박리액과 수분함유량이 최적화된 수계 박리액의 감광제박리 공정 결과 수계박리액이 유기계 박리액보다 동등 이상의 우수한 전기 및 광학적 특성 결과를 나타내었다. 유동 박리공정에서 유기계 박리액은 박리 중 감광제가 용해되어 박리액내부로 용해가 된 반면, 개발 중인 수계박리액은 용제에 포함된 cyclodextrin에 의한 감광제 포집으로 박리액의 감광제 용해 감소의 효과가 나타난 것으로 판단된다. 이러한 박리 메커니즘의 차이에 의한 박리공정 후 유기계와 수계 박리액의 청정성을 비교 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.368-372
• /
• 2009

The trace polymer and additives in used stripper solutions were analyzed by a combination of Py-GC/MS and ESI-MS. In the comparison of the pyrolysates produced by the pyrolysis of the pure stripper and photoresist at $500{^{\circ}C}$, the presence of novolac polymer in the used stripper was confirmed by the presence of the characteristic peaks of its pyrolysates, such as those of the methylphenol, di-methylphenol and methylenebis(methylphenol) isomers. The intact trace polymer was measured by ESI-MS, which showed the distribution of oligomers at intervals of 120 Da, indicating di-methylphenol to be the repeat unit. Additional MS/MS measurements demonstrated that the end group is methylphenol and the repeat groups are di-methylphenol. Some modified oligomers caused by the methylation or di-methylation of the repeat unit were also identified. Although the polymer is only present at a trace level in the used stripper, these combined analytical methods provided the means to qualify the stripper solution through the identification and structural determination of the polymer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.638-640
• /
• 2004

The gas stripper system of a nuclear power plant provides gas-free water to a reactor and a turbine system. The gas tripper unit has two control systems to regulate pressure and level independently. Because the level and the pressure interact as a control disturbance each other, continuous operation of the system is difficult. In this paper, We describe the controllability evaluation of the gas stripper system and the results of the optimally tuned control gains.

• 소성∙가공
• /
• 제12권8호
• /
• pp.724-729
• /
• 2003

In order to study the shearing characteristic of anti-vibration sheet metal which is used to reduce vibration noise, a blanking die was manufactured to blank a workpiece. The variables employed in this study were clearance, type of stripper plate, position of the rubber layer and type of the die design. These variables were used to study the effects on burr height, blank diameter and camber height. In the case of burr height from experimental investigation, the push-back die, combined with a movable stripper plate, showed greater burr height. The rubber-top position of a workpiece resulted in better qualities regardless of working variables. In the comparison of diameter measurement, the use of the push-back die with a fixed stripper plate, with a 4.5% clearance, showed better accuracy. For comparing camber height, the push-back die resulted in less cambering than the drop-through die. Also, the larger the clearance, the greater was the camber height. Considering experimental results, the shearing of anti-vibrational sheet metal is best achieved when the rubber layer is laying on the top, blanked with a fixed stripper plate in a push-back die, with a 4.5％ clearance.

• 에너지공학
• /
• 제28권4호
• /
• pp.13-18
• /
• 2019

The high energy penalty in amine-based post-combustion CO₂ capture process is hampering its industrial scale application. An advanced process is designed by intensive heat integration within the conventional process to reduce the stripper duty. The study presents the technical feasibility for stripper duty reduction by intensive heat integration in CO₂ capture process. A rigorous rate-based model has been used in Aspen Plus® to simulate conventional and advanced process for a 300 MW coal-based power plant. Several design and operational parameters like split ratio, stripper inter-heater location and flowrate were studied to find the optimum values. The results show that advanced configuration with heat integration can reduces the stripper heat by 14%.

• 산업경영시스템학회지
• /
• 제1권1호
• /
• pp.37-44
• /
• 1978

The purpose of this study is to search for an efficient application method in solving delay-phenomenon problems which influence upon total production cost through case study. The method of this study is an experimental study based on cutting time data in lead cutting operations from "Lead Cutting Machine (Stripper)" and its service rate data from a large electronic products company which utilizes conveyor line system for the products "Car Stereo" The procedure of this experimental study is as follows; 1) Using loading(Man-Hour) analysis technique j,1 order to analyse and evaluate Production capacity, efficiency, operation and idle rate assembly charge, waiting and service cost -when its are controlled by stripper operator(server) 2) Establishing adequate waiting time model of finite population caused by the interference of 4 stripper machine which is drawn from mathematical statistics testing, that is, goodness of fit test in the waiting and service rate and to search for optimal solution by utilizing the above mentioned model The experimental result was that amount to 8,546,618won Per year was brought down, that is, by optimum point, it shows a decrease as compared with Present point. The major limitation of this experimental study is that the Queue in the Finite Population, so to speak. it comes from the interference of 4 stripper machine dealt with this case were limited only on the Car Stereo conveyor line. Further study of application of this application method to the areas such as material handling, personnel management marketing and transportation management is strong1y recommended.trong1y recommended.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 제4회 박판성형 심포지엄
• /
• pp.29-34
• /
• 2003

In order to study the shearing characteristics of anti-vibration sheet metal which has been bonded by resin, a blanking die of 40.02mm was manufactured to blank a material and it is used to reduce vibrational noise. The variables employed in this study were 1) Clearance 2) types of stripper plate, and 3) types of the die design technique. These variables were used to study the effects on burr height, diameter of product, and camber height. Lastly, the effect of the position of the rubber during blanking was observed. In the case of burr height from experimental investigation, the push-back die, combined with a movable stripper plate, resulted in the concentration of additional pressure between the cutting edges, meaning the crack initiation was delayed. This result was not affected by lubrication, although appropriate lubrication is preferred to enable a longer lasting die in terms of wear, which results from the presence of adhesive as the sheet metal is blanked. In the comparison of diameter measurement, the push-back die, combined with the back pressure from the knock-out plate showed a favorable precision. The use of the push back die with a fixed stripper plate, with a $4.5\%$ clearance, showed better accuracy in the diameter measurement. For comparing camber height, the push back die resulted in less cambering than the drop-through die. Also, the larger the clearance, the greater was the camber height. Considering experimental results, the shearing of anti-vibrational sheet metal is best achieved when the rubber is laying on the top, blanked with a fixed-stripper plate in a push-back die, with a $4.5\%$ clearance.

• 자원리싸이클링
• /
• 제18권1호
• /
• pp.58-67
• /
• 2009

국내 포토레지스트 스트리퍼의 연간 소요량은 약 1000억원 규모(50, 000톤)로 대부분 전량 수입에 의존하고 있으나, 폐스트리퍼에는 각종 불순물이 함유되어 있어, 소각 또는 낮은 수준으로 재활용되어 오는데 그치고 있다. 최근 경제적 측면과 효율성 측면에서 스트리퍼 폐액의 재활용 기술이 폭넓게 연구되고 있다. 본 논문에서는 스트리퍼 폐액의 재활용에 관한 특허 기술을 분석하였다. 분석범위는 2007 9월까지 미국, 유럽연합, 일본과 한국에서 출원 및 공개된 특허로 제한하였다. 특허들은 전체적으로 검색어를 사용하여 수집되었고, 기준 기술 이외의 것을 여과하였다. 특허기술의 경향은 년도와 국가별, 기업 및 관련기술 분야별로 분석되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.77-80
• /
• 2001

IC lead frame needs the precision shape for good efficiency. In the blanking process, there are many parameter effected the dimensional accuracy : lead width, blanking order, striper force, tool clearance etc. In this research, the4 undesirable defects appeared in the final blanking process. so we measured the deflection of lead according to the stripper force using $PAM-STAMP_{TM}$. In the result, the deflection was decreased by increasing the stripper force properly. and we changed the blanking order on the test model. In the blanking order, deflection is good from the outer line position blanking to center line position. so we can design the precision die without tryout by the prediction of the lead deflection.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.174.2-174.2
• /
• 2013

사이클로트론에서 가속된 70 MeV 양성자 빔은 stripper에서 인출된 후 ISOL 표적에 조사하게 된다. 이 때 희귀동위원소를 생산하기 위한 ISOL 표적의 온도는 평균 $2,000^{\circ}C$ 5%로 유지하여야 한다. 사용하고자 하는 원판형태의 우라늄 표적은 직경이 45 mm 이므로 50 mm 이상의 균일한 양성자 빔이 필요하다. 본 연구에서는 stripper에서부터 ISOL 표적 까지 빔전송에 필요한 최적 조건을 연구하였다. 총 길이는 15 m 이며 두 개의 dipole을 사용하여 빔을 90도 전환시키며 3개의 4중극전자석을 사용하였다. ISOL 표적에 균일한 빔을 조사하기 위해 wobbling 방법을 활용하여 직경 50 mm 의 균일빔을 발생하고자 한다. 빔 전송 프로그램 TRANSPORT을 이용하여 stripper에서 wobbler 전까지의 빔 광학을 계산한 결과를 보고자 하고 TRANSPORT의 결과를 TURTLE 프로그램에 적용시켜 ISOL 표적에서의 균일도를 5% 미만으로 유지하는 최적조건을 발표한다.