• The Journal of the Korea Contents Association
• /
• v.6 no.10
• /
• pp.153-162
• /
• 2006

The WDM/SCM-FTTH is an advanced optical access Network that can efficiently support various kinds of access network requirements using the WDM and SCM technologies in the near future. In this paper, we propose new network structures of the FTTH(Fiber To The Home) in the WDM(Wavelength Division Multiplexing) and WDM/SCM(Sub-Carrier Multiplexing) FTTH, and evaluate its performance with simulation results for the optical characteristics of the network and the dynamic allocation of bandwidth on demand of the users.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.163-175
• /
• 2014

This paper will focus on improving the performance of orthogonal frequency division multiplexing (OFDM) in Rayleigh fading environments. The proposed technique will use a previously published method that has been shown to improve OFDM performance in independent fading, based on ordered sub-carrier selection. Then, a simple non-iterative method for finding the optimal bit-loading allocation was proposed. It was also based on ordered sub-carrier selection. We compared both of these algorithms to an optimal bit-loading solution to determine their effectiveness in a correlated fading environment. The correlated fading was simulated using the JTC channel models. Our intent was not to create an optimal solution, but to create a low complexity solution that can be used in a wireless environment in which the channel conditions change rapidly and that require a simple algorithm for fast bit loading.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.209-218
• /
• 2005

In this paper, we present an Active Optical Network(AON) . The AON uses the Dense Wavelength Division Multiplexing(DWDM) from optical communication access network of ring type, and will be able to provide the smoothly service in the Bandwidth on Demand by using DWDM. It supports the connection of the multiple wavelength and the Sub-Carrier from the optical gigabit ethernet switch. The Wavelength Add Drop Multiplexer(WADM) extracts a specific wavelength, and composes a node of the ring network. The specific wavelength becomes demultiplexing in the Sub-Carrier and it is distributed in the user The active connection of optical gigabit ethernet switch where the distribution of access network is started and access terminal connection equipment is possible. By the BoD from the AON it compares the buffer size which changes, and it analyzes. Also the Time delay of bit compares with the throughput of server The limit of amount of time is decided. Consequently it will be able to realize the dynamic use protocol and an efficient algorithm of the network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.621-629
• /
• 2001

In this thesis a wireless data transmission system has been proposed and analysed that uses the multi-carrier technique with the adaptive modulation scheme. In general, the OFDM(Orthogonal Frequency Division Multiplexing) system is assigning a same amount of information to all sub-carriers in a wireless data transmission. In the proposed system, the different amount of information is assigned to each sub-carrier depending on the state of channel and the target probability of error of system. With the proposed scheme, the transmission rate can be maximized with the fixed power and the required power to transmit the information can be minimized with the target probability of error of system.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.73-76
• /
• 2003

The capacity of backbone networks has largely kept pace with the tremendous of growth of Internet traffic. But there has been little progress in the access networks. In this paper, we introduce the access network that is able to offers high bandwidth and its simple protocol. The network architecture is basically multiple ring and use WDM(Wavelength Division Multiplexing), SCM (SubCarrier Multiplexing), and static WADM (Wavelenth Add/Drop Multiplexer) for simplicity, low cost, and offering high bandwidth.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10C
• /
• pp.965-975
• /
• 2005

In this paper, we propose and evaluate joint carrier and sampling frequency offset estimation schemes based on the channel estimation sequences in PLCP (Physical Layer Convergence Procedure) preamble for the proper and effcient synchronization of the MB-OFDM WB (Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) systems which have recently drawn explosive attention for future W-PAN (Wireless Personal Area Network) applications. In the joint estimation schemes, we first estimate the sampling frequency offset, and then estimate the carrier frequency offset using the estimated sampling frequency offset. Moreover, to improve the reliability of the estimated offset values, each process uses a combination scheme based on weighting factors. Simulation results using IEEE 802.15 Task Group 3a UWB channel models reveal that the estimation scheme using the simple weighting factors based on easily-measurable received signal power of each sub-channel shows favorably comparable performance to the ideal scheme using the weighting factors based on the perfectly-estimated frequency response of the channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2226-2234
• /
• 2016

Orthogonal Frequency Division Multiplexing (OFDM) technique uses multiple sub-carriers for the data transmission. Therefore, Inter Carrier Interference(ICI) is generated because of nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over Doppler fading channels also causes ICI. In OFDMA(Orthogonal Frequency Division Multiplexing Access), multiple sub-carriers are allocated to each user. Therefore, inter carrier interference causes interference to other users. I evaluate the BER performance of OFDMA systems in frequency selective fading channel, considering Multi-User Interference (MUI) owing to the carrier frequency offset, the nonlinear high power amplifier, and the Doppler fading. In the uplink OFDMA, multi-user interference introduces larger BER degradation than in the downlink. I explain the reason and obtain the required characteristics of the nonlinear amplifier and the value of frequency offset for good BER performance. And I also analyze the BER degradation upon Doppler fading channel.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.26-30
• /
• 2016

In this paper, an inter-orthogonal frequency division multiplexing (OFDM) sub-carrier distortion due to fiber chromatic dispersion is investigated. The fiber chromatic dispersion induces phase difference among OFDM sub-carriers, resulting in non-symmetric peak to average power ratio (PAPR) inducing inter-OFDM distortion. Experiments to confirm the fiber dispersion are performed in a direct-detection optical front-haul link. Quadrature phase shift keying (QPSK) encoded OFDM symbols at 25 Gbit/s are transmitted over 100 km fiber and the resulting error vector magnitude (EVM) of 40 % is observed.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.79-88
• /
• 2007

This paper proposes a novel concept of adjusting the hardware size in a multi-carrier code division multiple access (MC-CDMA) receiver in real time as per the channel parameters such as delay spread, signal-to-noise ratio, transmission rate, and Doppler frequency. The fast Fourier transform (FFT) or inverse FFT (IFFT) size in orthogonal frequency division multiplexing (OFDM)/MC-CDMA transceivers varies from 1024 points to 16 points. Two low-power reconfigurable radix-4 256-point FFT processor architectures are proposed that can also be dynamically configured as 64-point and 16-point as per the channel parameters to prove the concept. By tailoring the clock of the higher FFT stages for longer FFTs and switching to shorter FFTs from longer FFTs, significant power saving is achieved. In addition, two 256 sub-carrier MC-CDMA receiver architectures are proposed which can also be configured for 64 sub-carriers in real time to prove the feasibility of the concept over the whole receiver.