• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.867-869
• /
• 2003

Vacuum tube arrays (VTA) with a submicron dimension were fabricated by using anodic aluminum oxide (AAO) nano-templates. The field emission characteristics of Ni nanowires show a turn-on voltage in the range of 11.0-14.0 V and a field enhancement factor in the range of 560-2790. The distance between the tips of Ni nanowires and the anode was much smaller than that between the tips and the anode of conventional designs.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1363-1370
• /
• 1999

A study of scaling and heat transfer has been carried out for a vertical tube evaporator in which $CaSO_4$ saturated water flows upward. Experimental apparatus including vacuum chambers and heaters has been designed and manufactured to study scaling phenomena for three different pressures(1atm, 0.27atm and 0.16atm). Overall heat transfer coefficients have been measured and shown to decrease with time as scaling proceeds. After the end of experiments, the vertical tube has been cut to measure the thickness of scale at different heights. Below the height where the bulk fluid temperature does not reach saturated temperature, the thickness of scale increases, however, beyond that height occurring saturated condition, the thickness does not vary much or even decreases a little. The measured fouling resistances also support these variations of scale thickness.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.466.1-466.1
• /
• 2014

$TiO_2$는 저렴한 가격, 적절한 bandgap, 열적, 화학적, 생물학적 안정성 등으로 촉망받는 광촉매 물질이다. $TiO_2$는 rutile (tetragonal, space group: P42/mnm), anatse (tetragonal, space group: I41/amd), and brookite (orthorhombic, space group: Pbca )의 3가지 대표적인 결정구조를 가지고 있다. Rutile과 anatase는 1972년 Fujishima와 Honda가 $TiO_2$의 광촉매 특성을 발견 한 후로 아주 많은 연구가 되어왔다. 반면 brookite의 경우는 자연에 거의 존재하지 않으며, 합성방법도 어려워서 rutile과 anatase에 비해 많은 연구가 되지 않았다. 본 연구에서는 brookite를 포함한 다양한 $TiO_2$ 나노구조를 간단한 수열합성법으로 티타늄 호일 위에 합성하였다. 합성된 $TiO_2$는 반응 온도와 시간, additive의 농도에 따라서 sheet, tube, wire, pyramidal 의 4가지 morphologies를 가졌다. 이 다양한 morphologies은 SEM과 TEM으로 분석되었으며, 각 물질의 결정 구조는 XRD분석과 TEM의 SAED pattern 분석으로 sheet, tube, wire은 anatase, pyramidal 구조는 brookite라는 것이 확인 되었다. 위의 방법으로 합성된 각각의 $TiO_2$ 물질들을 working 전극으로, Pt와 Ag/AgCl을 reference와 counter 전극으로 만들어서 photoelectrochemical 특성을 측정해서 비교를 해보았을 때, brookite 물질이 anatase보다 더 좋은 photoelectrochemical 특성을 나타내는 것을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.106-109
• /
• 2022

The green-emitting Zn₂SiO₄:Mn²⁺ phosphor film was evaluated in a xenon excimer lamp. The phosphor film with 2 ㎛ thick was formed of monolithic structure on the inner side of quartz through a long-time annealing process of coated ZnO solution doped with Mn²⁺ ion and SiO₂ of quartz tube. The coated quartz was filled with 100 torr of xenon gas, and simultaneously both sides was melt and sealed. The xenon-field quartz tube was discharge by applying the voltage of 15 kV with a frequency of 26 kHz, and emitted the glow with dominant peak at 172 nm. The vacuum ultraviolet excited the inner-side coated Zn₂SiO₄:Mn²⁺ phosphor film, which emitted the pure and strong green light.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.369.2-369
• /
• 2002

For the evaluation of the plasma display panel (PDP)'s noise, vibration and sound characteristics of fanless PDP are measured and investigated. PDP is a type of two-electrode vacuum tube which operatres on the same principle as a household fluorescent light. An inert gas such as argon or neon is injected between two glass plates on which transparent electrodes have been formed, and the glass is illuminated by generating discharge. (omitted)

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.430.1-430.1
• /
• 2014

According to advanced nanotechnology in the field of biomedical engineering, many studies of the interaction between topography of surfaces and cellular responses have been focused on nanostructure. In order to investigate this interaction, it is essential to make well-controlled nanostructures. Electron beam lithography (EBL) have been considered the most typical processes to fabricate and control nano-scale patterns. In this work, $TiO_2$ nanowire array was fabricated with hybrid process (top-down and bottom-up processes). Nanodot arrays were patterned on the substrate by EBL process (top-down). In order to control the spacing between nanodots, we optimized the EBL process using Poly(methyl methacrylate) (PMMA) as an electron beam resist. Metal lift-off was used to transfer the spacing-controlled nanodots as a seed pattern of $TiO_2$ nanowire array. Au or Sn nanodots which play an important role for catalyst using Vapor-Liquid-Solid (VLS) method were patterned on the substrate through the lift-off process. Then, the sample was placed in the tube furnace and heated at the synthesis temperature. After heat treatment, $TiO_2$ nanowire array was fabricated from the nanodots through VLS method (bottom-up). These results of spacing-controlled nanowire arrays will be used to study the interaction between nanostructures and cellular responses in our next steps.

• 한국진공학회지
• /
• 제22권4호
• /
• pp.204-210
• /
• 2013

임플란트와의 골융합을 향상시키기 위해서 세포와 임플란트 표면의 나노구조의 상호작용에 대한 이해가 중요하다. 본 연구에서는 Sn를 촉매로 이용하여 Vapor-Liquid-Solid 법을 이용하여 $TiO_2$ 나노와이어를 튜브 전기로 안에서 질소기체 조건하에서 합성하였다. 이 때 촉매로 사용된 Sn 박막의 두께에 따라 응집된 나노스피어를 이용하여 $TiO_2$ 나노와이어의 크기를 조절하였다. 골융합을 위한 예비 실험으로써, 만들어진 $TiO_2$ 나노와이어 샘플 위에서 조골전구세포(pre-osteoblast)를 1주일간 배양하였고, 세포가 $TiO_2$ 나노와이어에 잘 결합함을 볼 수 있었다.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.115-119
• /
• 2014

$Cu(In,Ga)Se_2$ (CIGS) thin films have been used as a light absorbing layer in high-efficiency solar cells. In order to improve the quality of the CIGS thin film, often selenization step is applied. Especially when the thin film was formed by non-vacuum powder process, selenization can help to induce grain growth of powder and densification of the thin film. However, selenization is not trivial. It requires either the use of toxic gas, $H_2Se$, or expensive equipment which raises the overall manufacturing cost. Herein, we would like to deliver a new, simple method for selenization. In this method, instead of using a costly two-zone furnace, use of a regular tube furnace is required and selenium is supplied by a mixture of selenium and ceramic powder such as alumina. By adjusting the ratio of selenium vs. alumina powder, selenium vaporization can be carefully controlled. Under the optimized condition, steady supply of selenium vapor was possible which was evidently shown by large grain growth of CIGS within a thin powder layer.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.148-148
• /
• 2017

Surface modification is a type of mechanical manipulation skills to achieve extensive aims including corrosion control, exterior appearance, abrasion resistance, electrical insulation and electrical conductivity of substrate materials by generating a protective surface using electrical, physical and chemical treatment on the surface of parts made from metallic materials. Such surface modification includes plating, anodizing, chemical conversion treatment, painting, lining, coating and surface hardening; this study conducted cavitation experiment to assess improvement of durability using anodizing. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant speed. In addition, using galvanostatic method, it was maintained at processing time of 40minutes for 10 to $30mA/cm^2$. The cavitation experiment was carried out with an ultra sonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1mm. The specimen after the experiment was cleaned in an ultrasonic bath, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the study, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with the anodizing process time.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.38-45
• /
• 2020

아진공 튜브 안을 부상한 상태로 주행하는 캡슐트레인은 공기저항력 및 마찰력을 획기적으로 줄임으로써 초고속 주행이 가능하다. 캡슐트레인에서 부상방식으로 사용되는 초전도 유도 반발식 부상은 부상 공극이 커서 인프라 건설비용이 저렴하고 별도의 부상제어가 필요 없는 장점이 있지만, 부상·안내 공극의 변화가 크고 부상 및 안내력에 댐핑 특성이 작아 주행 안정성 및 승차감을 악화시킬 수 있다. 본 연구에서는 초전도 유도 반발식 부상방식에 기반한 캡슐트레인의 동특성 해석 모델을 구축하고 이를 활용하여 캡슐트레인의 주행 특성을 분석하였다. 먼저 초전도 유도 반발식 부상에 있어서 동특성에 중요한 영향을 미치고 속도 및 공극 변화에 따라 비선형적인 특성을 보이는 부상 및 안내 강성을 도출하였고, 이러한 강성이 반영된 캡슐트레인의 3D 동특성 해석 모델을 구축하였다. 구축된 모델을 이용하여 캡슐트레인의 속도별 주행 특성이 승차감에 미치는 영향과 곡선 주행, 튜브 처짐 및 튜브 연결부 단차 등과 같은 주행 환경이 차량의 동특성 및 주행 안정성에 미치는 영향을 검토하였다.