• 상하수도학회지
• /
• 제34권2호
• /
• pp.127-137
• /
• 2020

In this study, a MWCNT(multi-wall carbon nanotube) was added to polysulfone(PSf) support layer to improve flux of TFC(thin film composite) RO(reverse osmosis) membrane. Two different kinds of MWCNT were used. Surfaces of some MWCNTs were modified hydrophilically through acid treatment, while those of other MWCNTs were modified through heat treatment to maintain their hydrophobicity. MWCNT/PSf support layer was prepared by adding PSf to the NMP mixed solvent containing 0.1 wt% MWCNTs using a phase inversion method. The surface porosity of the MWCNT/PSf support increased by 42~46% while its surface pore size being maintained. The TFC RO membrane made of MWCNT/PSf support layer showed a 20% flux increase while its salt rejection characteristics is sustained. In addition, the MWCNT/PSf support layer has better mechanical stability than the PSf support layer, there resulting in an increased resistance of flux reduction due to physical pressure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.910-913
• /
• 2000

In this research we investigate geometric issues involved while using a particular rapid prototyping system, called Stereolithography(SLA). SLA create prototypes layer by layer, each layer being formed by scanning a laser beam across the x, y surface of a vat of liquid monomer mix. The performance of SLA is influenced by orientation and layer thickness of designed fabrication. The number of layer and the area needed support is influenced by the orientation and layer thickness of designed fabrication. The step influence and volume error is influenced by slice thickness. We minimize the support are, the number of layer and cusp height. These variables of fabrication is minimized using genetic algorithm. The time for genetic algorithm is as little as we can accept. So we calculate support area and cusp height simply.

• 보존과학회지
• /
• 제38권1호
• /
• pp.45-54
• /
• 2022

This study examined the production technique of bracket murals in Daeungjeon Hall, Gaeamsa Temple by conducting a analysis of their wall structure, material characteristics, and painting layers. Wall was a single-branch structure with support layer, middle layer, finishing layer, and painting layer. The support layer, middle layer and finishing layer, were produced by mixing sand (quartz, feldspars etc.), and loess. The ratio of above medium sand to below fine sand was approximately 0.7 : 9.3 in the support layer, 4 : 6 in the middle layer and 6 : 4 in the finishing layer, which had a more percentage of above medium sand than the support layer. The analysis of the painting layer showed that natural soil pigment was used to establish a relatively ground layer of up to 50 ㎛, and pigments such as Lead sulfate, atacamite and mercury sulfide were painted on top of the layer. This study's results confirmed that the bracket mural paintings in Gaeamsa Temple are within the category of the production style of murals during the Joseon period. However, the points that the middle layer was formed several times, the significant difference in particle size distribution between the wall, and the absence of chopped straw in the support layer are a feature of bracket mural paintings in Gaeamsa Temple. These properties of murals as material and structure may be viewed for correlation with the degree of damage to wall structure of mural painting and would serve as an important reference to diagnosis the conservation conditions of murals or prepare conservation treatments.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.82-90
• /
• 1999

송광사 삼세불화는 조성년도가 확실하지 않지만 남아있는 서기(書記)와 재질 분석을 통해 19세기초에 제작된 것으로 추정 할 수 있었다. 그리고 공시불화의 보존처리를 위해 안료층과 바탕층, 지지층을 구성하고 있는 재질을 분석하고 이에 적합한 지지층인 배첩지를 초지하여 그 적합성을 시험한 바 다음과 같은 결론을 얻었다. 1. 삼세불화의 단면구조는 안료층과 명주로 된 바탕층 그리고 한지(韓紙)로 이루어진 지지층으로 구성되어 있어 19세기 당시의 불화는 기본적으로 안료층, 바탕층, 지지층으로 구성되어 있음을 알 수 있었다. 또한 안료층과 바탕층의 접착은 아교를 사용하였고 지지층의 sheet 배첩은 호료(糊料)를 사용했음을 알 수 있었다. 2. 삼세불화의 지지층은 5겹으로 구성되어 있고 두 종류의 종이가 사용되었는데 바탕층과 접해 있는 1~2층은 순수한 닥섬유로 제조한 한지(韓紙)를 사용하였고 나머지 3개 층은 폐마섬유(廢麻纖維)에 닥섬유가 혼합된 종이를 사용하였다. 더 많은 자료가 확보되어야만 단언할 수 있지만 재질을 통해 당시의 상황을 파악해 보면 19세기 당시의 사회는 경제적으로 어려움을 겪고 있었고 더욱이 사찰 제지업은 피폐해져 운영이 어려워 후면에 사용한 배첩지는 질이 떨어지는 폐마를 이용 했을 것으로 추측되었다. 3. 본 재료의 바탕층과 지지층간의 인장력을 고려하여 새롭게 제조해 보수용으로 사용한 바 본 공시재료의 보수용 배첩지로서 적합했음을 알 수 있었다.

• 멤브레인
• /
• 제31권1호
• /
• pp.80-85
• /
• 2021

본 논문에서는 ~1.5 ㎛의 기공 크기를 가지는 고투과도 알파 알루미나 지지체 위에 도포된 서스펜션의 증발유도 자기조립 현상을 이용하여 중간층을 형성하는 새로운 코팅 방식을 소개한다. 새로운 코팅 방법으로 만들어진 중간층은 일반적으로 사용되는 담지법으로 코팅된 중간층과 비교하여 표면거칠기와 불균일도가 낮아 코팅에 적합하였다. 복합막 지지체로서의 평가를 위해 제조된 지지체는 감마 알루미나 복합막 제조에 사용되었다. 메조 기공을 가지는 감마 알루미나 복합막은 반복코팅 없이도 매크로 기공 크기의 결함이 존재하지 않았으며 일반적으로 널리 사용되는 100~200 nm의 기공 크기를 가지는 지지체로부터 만들어진 같은 두께의 복합막과 비교하여 2.3배 이상의 높은 질소투과도를 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.98-100
• /
• 2005

This paper, proposes concept of personal robot middleware core also called streaming layer. Based on openness and portability, the streaming layer is proposed in order to meet requirements of different kinds of applications. The streaming layer architecture provides effective management of data flows and allows integration of different systems with ease regardless software of hardware platform. With extensibility support additional features can be build in without affect to performance. Therefore, heterogeneous network support, real-time communications, embedded boards support can be easily achieved. In order to achieve high performance together with portability into different platforms, the most functions has to be implemented in C language, while critical parts, such as scheduling, priority assignment has to be made using native functions of tested platforms.

• 멤브레인
• /
• 제11권2호
• /
• pp.83-88
• /
• 2001

본 연구에서 상업용 폴리설폰 한외여과 중공사막을 지지체로 사용하여 저압 정수용 역삼투압막 제조시 막표면에서 feed의 큰 전단응력에 견딜 수 있도록 도포층과 지지층의 결합력을 증가시키는 전처리 방법을 확립하였다. 확립한 전처리 공정에서 지지막과 친화력이 좋으면서 도포층을 이루는 반응물과 반응성이 있는 글루탈알데히드와 촉매역할을 하는 염산 혼합 수용액으로 지지막을 전처리하면 이들 글루탈알데히드는 지지막 표면 및 기공 벽에 균일하게 분포되어 이후 표면중합법에 의해 형성된 도포층을 이루는 일부 반응물과 화학적으로 결합 되어 지지체와 도포층간에 강한 결합력을 제공한다. 전처리공정 없이 제조한 중공사 역삼투압막은 투과 후 5시간 이내에 feed의 큰 전단응력에 의해 도포층의 분리 파괴가 일어났으나 본 연구에서 확립한 방법으로 전처리하여 제조한 중공사막은 장시간 사용에도 우수한 막성능이 지속되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.320-322
• /
• 2009

Support vector learning attracts great interests in the areas of pattern classification, function approximation, and abnormality detection. In this pater, we design the controller using support vector regression which has good properties in comparison with multi-layer perceptron or radial basis function. The applicability of the presented method is illustrated via an example simulation.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.339-344
• /
• 2014

Different types of polyethersulfone (PES) support layer for a thin film composite (TFC) membrane were synthesized under various synthesis conditions using the phase inversion method to study the combined effects of substrate, adhesive, and pore former. The permeability, selectivity, pore structure, and morphology of the prepared membranes were analyzed to evaluate the membrane performance. The combined use of substrate, adhesive, and pore former produced a thinner dense top layer, with more straight finger-like pores. The pure water permeation (PWP) of the optimized PES membrane was $27.42L/m^2hr$ (LMH), whereas that of bare PES membrane was 3.24 LMH. Moreover, membrane selectivity, represented as divalent ion ($CaSO_4$) rejection, was not sacrificed under the synthesis conditions, which produced the dramatically enhanced PWP. The high permeability and selectivity of the PES membrane produced under the optimized synthesis conditions suggest that it can be utilized as a potential support layer for TFC membranes.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.227-234
• /
• 2007

In this paper, to support a QoS level appropriate to the user in Wireless Home Network based Wireless LAN, we propose a QoS support architecture which includes Wired Network and Wireless Network. Actually, an important problem to support QoS in Wireless Home Network is approached not only on a MAC level in Wireless LAN but also on a integrated method to combine Network layer with Datalink layer. By applying the integrated QoS support method, it is possible to provide QoS support architecture using a Wireless LAN terminal with a minimum changing, and the proposed scheme has advantage of QoS support method, which is more superior than a existing scheme to support QoS in MAC level of Wireless LAN. Simulations results show that overall performance of the proposed scheme can be improved.