• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.13.1-13.10
• /
• 2020

Objective: The aim of this study was to evaluate the influence of different modeling agents on the surface microhardness (Vickers hardness number; VHN), roughness (Ra), and color change (ΔE) of a nano-hybrid composite with or without exposure to discoloration by coffee. Materials and Methods: Sixty-four cylinder-shaped nano-hybrid composite specimens were prepared using a Teflon mold. The specimens' surfaces were prepared according to the following groups: group 1, no modeling agent; group 2, Modeling Liquid; group 3, a universal adhesive (G-Premio Bond); and group 4, the first step of a 2-step self-adhesive system (OptiBond XTR). Specimens were randomly allocated into 2 groups (n = 8) according to the storage medium (distilled water or coffee). VHN, Ra, and ΔE were measured at 24 hours, 1 week, and 6 weeks. The Kruskal-Wallis test followed by the Bonferroni correction for pairwise comparisons was used for statistical analysis (α = 0.05). Results: Storage time did not influence the VHN of the nano-hybrid composite in any group (p > 0.05). OptiBond XTR Primer application affected the VHN negatively in all investigated storage medium and time conditions (p < 0.05). Modeling Liquid application yielded improved Ra values for the specimens stored in coffee at each time point (p < 0.05). Modeling Liquid application was associated with the lowest ΔE values in all investigated storage medium and time conditions (p < 0.05). Conclusion: Different types of modeling agents could affect the surface properties and discoloration of nano-hybrid composites.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.411-416
• /
• 2017

적외선 표적의 정밀한 모델링을 위해서는 정확한 표면온도 계산이 필요하다. 본 논문에서는 전도, 대류, 복사를 고려한 복합 열해석 모듈을 소프트웨어로 구현하고, 이를 통하여 표적 재질 및 자세, 환경 요건에 따른 표적의 표면온도 해석을 수행 하였다. 구현된 결과는 상용 소프트웨어인 OKTAL-SE 와의 비교를 통하여 결과의 신뢰성을 검증하였다. 그 결과 자체 검증이 완료된 상용 소프트웨어인 OKTAL-SE 와 약 1% 이내의 오차를 보였다. 계산된 온도 결과를 바탕으로 적외선 표적 모델링을 수행하였으며 OKTAL-SE와의 연동을 통해 적외선 신호 해석을 수행하였다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.92-98
• /
• 2010

Virtual ground modeling is one of key topic for real-time vehicle dynamic simulation. This paper discusses about the virtual 3D road modeling process using parametric surface concept. General road data is a type of lumped position vector so interpolation process is required to compute contact of internal surface. The parametric surface has continuity and linearity within boundaries and functions are very simple to find out contact point. In this paper, the parametric surface formula is adopted to road modeling to calculate road hight. Position indexing method is proposed to reduce memory size and resource possession, and a simple mathematical method for contact patch searching is also proposed. The developed road process program is tested in dynamic driving simulation on off-road. Conclusively, the new virtual road program shows high performance of road hight computation in vast field of off-road simulation.

• 한국축산식품학회지
• /
• 제37권1호
• /
• pp.139-146
• /
• 2017

Response surface methodology (RSM) is a useful set of statistical techniques for modeling and optimizing responses in research studies of food science. In the analysis of response surface data, a second-order polynomial regression model is usually used. However, sometimes we encounter situations where the fit of the second-order model is poor. If the model fitted to the data has a poor fit including a lack of fit, the modeling and optimization results might not be accurate. In such a case, using a fullest balanced model, which has no lack of fit, can fix such problem, enhancing the accuracy of the response surface modeling and optimization. This article presents how to develop and use such a model for the better modeling and optimizing of the response through an illustrative re-analysis of a dataset in Park et al. (2014) published in the Korean Journal for Food Science of Animal Resources.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.1026-1039
• /
• 2014

We present a new method for generating sweep surfaces using bivariate B-spline motion. The sweep surface is defined as the trace of a single point under bivariate B-spline motion. Direct manipulation of the sweep surface is achieved by controlling its motion components while producing various editing effects. We demonstrate the effectiveness of our technique by modeling and deforming various three-dimensional shapes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1159-1162
• /
• 2004

A modeling of the nucleation and dynamical behavior of defects from an inhomogeneous surface configuration using fast Q-tensor method is realized. On modeling the defect nucleation and dynamics, A fast Q-tensor method is applied. From the numerical modeling, we confirmed that surface inhomogeneity which makes strong strain energy in the local liquid crystal director field could cause defects. Experimental result has compared with numerical modeling in order to verify the simulation of the defect nucleation.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 춘계학술발표대회논문집
• /
• pp.492-498
• /
• 2003

본 논문에서는 실사와 같은 사실적인 3차원 Facial Model 제작을 위해 해부학 접근을 통한 근육기반의 자연스러운 Facial Modeling 제작을 연구하였다 한국인 기본형 얼굴을 연구 대상으로 선정하여 안면근육 비례를 분석한 후 Multi-patch Surface Modeling 방법을 적용하며 제작하였다. 이 방법에는 통계적 분석기법 중 L/sub 27/(3/sup 13/) 3수준계 직교배열표를 이용하여 검증하였다. 본 연구를 통하여 Facial Model 제작 시 최소의 UV spans 수로 최대 시각화 즉, 원본의 형상을 최대한 유지하면서 작업시간과 Rendering 시간 단축 및 Data 용량을 줄일 수 있는 Modeling 방법을 제안하였고, 향후 자연스런 Facial Animation 제작 및 연구에도 많은 도움이 될 것으로 기대된다.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.303-308
• /
• 2018

Currently hydrofluoric acid (HF) based glass etch method is widely used for anti-glare (AG) surface treatment since it can effectively alleviate the specular reflection problem with relatively low processing cost. However, due to the environmental regulation and safety problem, it is essential to develop alternative technology to replace this method. For this, in this paper, we propose sand blasting based AG surface treatment method for display glass. To characterize the sand blasting process, surface roughness, haze, surface durability, and flatness are considered as process outputs and central composite design (CCD) method and response surface model (RSM) method are applied to model each process output. Models for surface roughness and haze showed 96.44% and 97.24% of R-squared values, respectively and they can be applied to optimize AG surface treatment process for various haze level requirements of display industries.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권2호
• /
• pp.257-262
• /
• 2016

본 연구는 3차원 프린터를 이용한 보청기 이어 쉘 제작기법에서 보청기 이어 쉘 제작에 필요한 모델링 구조를 DICOM(Digital Imaging and Communication in Medicine) 영상에 의한 새로운 방법으로 제시하고자 하였다. 실험방법은 DICOM 볼륨 영상에서 임계치 값을 이용한 3차원 외이도를 추출하여 3차원 프린터가 인식할 수 있는 표준 형식의 STL(STereoLithography) 파일로 모델링 표면구조를 비교하였다. 이러한 3차원 모델링은 기존의 귓본 제작 후 3차원 스캐너에 의한 인접한 등치선 사이를 3차원 표면조각들로 채워 모델링 구조를 표현한 방법들로서 본 연구에서도 DICOM 영상에 의한 삼각형 표면구조를 동일하게 만들 수 있었다. 이는 DICOM 영상에 의한 모델링 표면구조가 기존 3차원 프린터가 인식할 수 있는 동일한 환경을 제공해 최종적으로 보청기 이어 쉘 형상을 출력 할 수 있음을 나타냈다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.426-429
• /
• 2001

Many various products are manufactured which have sculptured surfaces recently. Constructing surface of these models is required technique called reverse engineering. In reverse engineering, a product which has sculptured surfaces is measured and we create surface model to acquire complete model data of object. Measured point data needs preprocess and sampling. Next a set of point data in a plane fit section curve. At last, surface is generated by fitting to section curves. Here we uses sweep surface. Sweep surface is compatible fitting CAD model to drawing. This paper discusses converting approximation of NURBS surface as a standard surface.