• KSBB Journal
• /
• v.22 no.1
• /
• pp.43-47
• /
• 2007

The effect of surfactant on the hydrolysis of used newspaper was investigated. The most suitable surfactant for the pretreatment stage was found to be NP-series surfactants among 9 kinds of non ionic surfactants. Process parameters such as surfactant concentration, mixing speed, pretreatment temperature and time were tested to optimize for maximum digestibility and 0.5%, 100rpm, 30$^{\circ}C$, and 1 h were found to be optimum, respectively. In order to maximize digestibility, substrate was pretreated with NP-20 and then the pretreated substrate was hydrolyzed by adding TW-80. The effect of surfactant on the hydrolysis of previously surfactant-pretreated newspaper was marginal. Therefore, the digestibility with the addition order of enzyme and surfactant was investigated by using surfactant only in hydrolysis stage. The results show that digestibility was more lowered as the surfactant addition after adding enzyme to substrate was more delayed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1965-1970
• /
• 2009

This study examined the effect of surfactant pretreatment on the pectinase-treated cotton/chitosan blends by weight loss and properties such as water absorbency, dyeability, tensile strength, pilling property, and surface morphology. The weight loss of cotton/chitosan blends was 1.5% by the surfactant pretreatment/pectinase treatment. The water absorbency and dyeability of samples showed a significant improvement by the surfactant pretreatment/pectinase treatment. The tensile strength and pilling property of treated fabrics showed no change. The water absorbency and dyeability of pectinase treated samples improved with the pretreatment of the surfactant without damaging the fibers.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.43-49
• /
• 1999

Separation of soluble oil was investigated during filtration of cutting oil emulsion using various commercial ultrafiltration membranes. The surface properties of membranes used were hydrophilic hydrophobic and modified surfaces by various surfactant pretreatments. Conditions varied include stirring speed transmeembrane pressure membrane type and surfactant type for pretreatment. The results give some indication of mechanisms occurring at the membrane surface. Surfactant pretreatments significantly improved water flux and UF flux of hydrophilic regenerated cellulose(up to 2.4x for YM100) and hydrophobic polysulfone (up to 2.2x for PTHK) membranes depending on surfactant type and operating conditions. The UF flux enhancement was attributed to membrane swelling and reduction of interfacial surface tension between oil droplets and membrane surface. unexpectedly the hydrophilic membranes revealed greater flux enhancement than the hydrophobic membranes. The results also showed a greater improvement in UF flux at lower operating pressure.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.44-50
• /
• 2020

In this study, pre-treatment was performed on kapok, a hydrophobic fiber, to compare dyeability by hydrophilization. The pretreatment conditions of kapok fiber were used with different amounts of sodium oleate(NaO), a fatty acid-based anionic surfactant, and xanthan gum(XG) as a natural thickener. At this time, NaO and XG were separately or mixed treated with 0.01%, 0.1%, 1% aqueous solution at 80℃ for 30 min. Hydrophilicity through dyeing was confirmed using Sappan wood extract. Therefore, SEM observation was performed to investigate the surface change of kapok fiber according to the conditions. The surface color difference was also analyzed. Pretreated kapok fibers were made from nonwoven fabrics and the contact angles were measured to determine their hydrophilization. The surface of the fiber after pretreatment was found to be cracked when NaO and NaO were mixed with XG. The surface color was the highest in a^⁎ and K/S values after the simultaneous treatment of NaO and XG, followed by NaO pretreatment and XG pretreatment. The contact angle of kapok fiber made of nonwoven fabric was slightly lower at 300g/㎡ than the fabric weight of 150g/㎡. Such hydrophilized nonwoven kapok fiber are expected to be used in various fields.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.4
• /
• pp.735-741
• /
• 2008

In our previous study, a surfactant-coated Candida rugosa lipase immobilized in microemulsion-based organogels was exploited for the synthesis of ethyl isovalerate. In the present study, we are focusing on the effective reuse of lipase immobilized in microemulsion-based organogels (MBGs) in terms of retainment of the catalytic activity. As water is one of the co-products in esterification reactions, the removal of water becomes a priority to allow the reaction to work in the forward direction and to prevent back hydrolysis. Taking this fact into consideration, the lipase-containing microemulsion-based organogels were given pretreatment and/or several intermittent treatments with dry reverse micellar solution of AOT in organic solvent during repeated cycles of ester synthesis. The pretreated MBGs with dry reverse micellar solution exhibited lower water content and higher initial rates of esterification in comparison with untreated freshly prepared MBGs. The esterification efficiency of untreated MBGs started decreasing after 5 cycles of reuse and was almost completely lost by the end of the $8^{th}$ cycle. In contrast, pretreated MBGs exhibited a gradual decrease in esterification efficiency after 5 cycles and retained about 80% of the initial activity at the end of the $8^{th}$ cycle. The intermittent treatment of MBGs after every 3 cycles resulted in enhanced reusability of immobilized lipase for up to 9 cycles without significant loss in esterification activity, after which it resulted in a slow decrease in activity with about 27% lower activity at the end of the $12^{th}$ cycle. Furthermore, the treatment conditions such as concentration of AOT in liquid dessicant and time of treatment were optimized with respect to our system. The granulated MBGs proved to be better in terms of initial esterification rates (1.2-fold) as compared with the pelleted MBGs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1397-1401
• /
• 2007

An in situ experiment was conducted to find out whether Tween 80 improves rice straw digestion through increased adhesion of major fibrolytic bacteria. Rice straw was sprayed with various levels of Tween 80 non-ionic surfactant or SDS ionic surfactant 24 h before incubation in the rumen of Holstein steers. Dry matter (DM) disappearance and adhesion of F. succinogenes, R. flavefaciens and R. albus on rice straw after in situ incubation were measured by real-time PCR. Application of Tween 80 increased DM disappearance, which was more noticeable at an application level of 1% compared to lower application levels. Application of SDS resulted in an opposite response in DM disappearance with highest reduction in DM disappearance at 1% level. In a subsequent in situ experiment, higher Tween 80 was applied to rice straw in an attempt to find the optimum application level. Tween 80 at 2.5% gave better DM disappearance than 1% with a similar result at 5%. Therefore, an adhesion study was carried out using rice straw treated with 2.5% Tween 80. Our results indicated that Tween 80 reduced adhesion of all three major rumen fibrolytic bacteria to rice straw. Present data clearly show that improved DM disappearance by Tween 80 is not due to increased bacterial adhesion onto substrates.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.12
• /
• pp.1613-1620
• /
• 2012

Bacterial wilt caused by Ralstonia solanacearum is a devastating disease of many economically important crops. Since there is no promising control strategy for bacterial wilt, phage therapy could be adopted using virulent phages. We used phage PE204 as a model lytic bacteriophage to investigate its biocontrol potential for bacterial wilt on tomato plants. The phage PE204 has a short-tailed icosahedral structure and double-stranded DNA genome similar to that of the members of Podoviridae. PE204 is stable under a wide range of temperature and pH, and is also stable in the presence of the surfactant Silwet L-77. An artificial soil microcosm (ASM) to study phage stability in soil was adopted to investigate phage viability under a controlled system. Whereas phage showed less stability under elevated temperature in the ASM, the presence of host bacteria helped to maintain a stable phage population. Simultaneous treatment of phage PE204 at $10^8$ PFU/ml with R. solanacearum on tomato rhizosphere completely inhibited bacterial wilt occurrence, and amendment of Silwet L-77 at 0.1% to the phage suspension did not impair the disease control activity of PE204. The biocontrol activities of phage PE204 application onto tomato rhizosphere before or after R. solanacearum inoculation were also investigated. Whereas pretreatment with the phage was not effective in the control of bacterial wilt, post-treatment of PE204 delayed bacterial wilt development. Our results suggested that appropriate application of lytic phages to the plant root system with a surfactant such as Silwet L-77 could be used to control the bacterial wilt of crops.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2010

CNT and permalloy composite plating was investigated. CNTs were pretreated prior to electroplating to disassemble the tangled CNT lumps. The ball milling as a physical pretreatment and the acid treatment as a chemical pretreatment were used. 10M nitric acid and 10 M sulfuric acid were used for the chemical pretreatment. Sulfuric acid was more effective than nitric acid to disassemble CNT lumps. To disperse CNT in the solution, surfactants were used. SDS, Triton X-100 and PAA were used for this purpose. More CNTs were incorporated in permalloy coating when PAA was used as a surfactant. The surface morphologies were observed with FESEM after electroplating CNT and permalloy. The current densities were varied from 10 to $80\;mA/cm^2$ and the concentration of PAA was fixed at 2 g/L. The optimum current density without surface cracks was $20\;mA/cm^2$. The crystallinity of the deposit was analyzed with XRD and the surface hardness was analyzed with Vicker's hardness tester. The corrosion behavior was analyzed with polarization plot. The physical properties of permalloy were not improved with CNT composite plating.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.1-5
• /
• 2015

This study is to investigate the effect of torrefaction on enzymatic hydrolysis of lignocellulosic biomass for bio-ethanol production. As a pretreatment, the torrefaction of lignocellulosic biomass was conducted in temperature of $250{\sim}350^{\circ}C$ in the absence of oxygen. Tween-80, nonionic surfactant, was tested to enhance saccharification efficiency by coping with hydrophobicity resulted from torrefaction. As a result, the glucose production from enzymatic hydrolysis of biomass pretreated by torrefaction was greater than that obtained from the non-pretreated biomass. Sugar conversion was higher when the biomass was saccharified with addition of tween-80. It was found that torrefaction can be applied as a preptreatment for lignocellulosic biomass and tween-80 is needed to enhance its enzyme saccharification.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.4
• /
• pp.437-450
• /
• 2006

Background : Acute respiratory distress syndrome (ARDS) is characterized by severe inflammatory pulmonary edema of unknown pathogenesis. To investigate the pathogenesis of ARDS associated with neutrophilic oxidative stress, the role of phospholipase $A_2$ ($PLA_2$) was evaluated by the inhibition of calcium channel. Methods : In Sprague-Dawley rats, acute lung injury (ALI) was induced by the instillation of E.coli endotoxin (ETX) into the trachea. At the same time, diltiazem was given 60 min prior to tracheal instillation of ETX. Parameters of ALI such as lung and neutrophil $PLA_2$, lung myeloperoxidase (MPO), BAL neutrophils, protein, surfactant were measured. Production of free radicals from neutrophils was measured also. Morphological studies with light microscope and electron microscope were carried out and electron microscopic cytochemistry for detection of free radicals was performed also. Results : Diltiazem had decreased the ALI parameters effectively in ETX given rats and decreased the production of free radicals from neutrophils and lung tissues. Morphological studies denoted the protective effects of diltiazem. Conclusion : Diltiazem, a calcium channel blocker, was effective in amelioration of ALI by the suppression of neutrophilic oxidative stress mediated by $PLA_2$ activation.