• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.421-426
• /
• 2015

This paper presents a hybrid single optical system for an LED surgical light that combines the advantages of both lens- and reflector-type single optical systems. The proposed hybrid single optical system includes a lens in the center and the LED light originating from the lens is redirected using a reflector to achieve a high beam spread. Iterative optical software simulations are used to provide data for the design of the lens and reflector for a single optical system, and for a complex optical system for the LED light assembly. The resulting data is also used to fabricate a prototype system. Experiments using the prototype of the hybrid single optical system and a mock-up LED surgical light confirm the system's shadow dilution performance and its applicability to surgical operations.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.452-457
• /
• 2011

The internal temperature of an operating room had to keep within $20^{\circ}C$. However, the doctor who is wearing operating gown and mask caused to rise temperature because of the thermal occurrence of dental LED light source. At first, the surgery environment is getting worse. And then last, it would increase bleeding rate by the expansion of patient's exposured blood vessel. A surgical operator can distribute the patient's tissue through such surgery environment, exactly. It can do accurate surgery. So, it gave to effect that surgical operator's eye condition is getting better and it could keep a mutual assistance system. For this research, we develop the LED dental light source module of high color rendition. It performed simulation for replacing established the method of Halogen lamp and Plazma lamp of light source. We analyzed intensity of illumination and the change of viability by changing the height of light source module.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.1111-1117
• /
• 2011

본 연구에서는 의료용 신조명 부품으로 주목받고 있는 고출력 LED를 사용해 구강구조 확인을 위한 치과영역, 진료 및 수술실에서 환부에 대한 작은 범위(국소부위)의 무영 촬영이 가능한 휴대용 LED Light를 설계 개발하였다. 개발에 적용한 LED는 피사체 고유의 Tone에 대한 섬세한 표현력과 입체감을 부각시키기 위해 다양한 색상 구현 및 광량조절이 가능하도록 3색 LED를 사용했다. 사용된 LED의 전기적 특성 및 광학적 특성을 고려해 고효율의 Light Module를 개발했으며 휴대 사용을 위해 낮은 전압에서도 구동이 가능한 SMPS를 제작했다. 또한 PWM 제어방식을 이용해 단색광부터 백색광까지 32,768개의 다양한 색상 구현이 가능했다.

• 로봇학회논문지
• /
• 제7권4호
• /
• pp.267-275
• /
• 2012

When using commercialized robot assisted laparoscopic, surgeon has met some problems to depend only on image of the surgical field. To solve it, there were various researches. The previous study showed that it is possible to estimate the operation force on the commercialized instrument inside patient without sensors. To apply the estimated force to a haptic master console for the laparoscopy surgical robot system, the light haptic master console should be designed. This paper suggests the design of lighter master console handle to reduce a weight of the console whose structure can match with the joint and DOF of an instrument. A cable-conduit mechanism is designed to make light structure to perform a delicate manipulation. The cable-conduit mechanism removes the weight and inertia of link caused by haptic actuator and encoder which is separated from handle link of a manipulator.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.256-262
• /
• 2019

Extensive tumor resection accompanied by radiotherapy and chemotherapy is the standard of care for malignant gliomas. However, there is a significant obstacle to the complete resection of the tumor due to the difficulty of distinguishing tumor and normal brain tissue with a conventional surgical microscope. Recently, multiple studies have shown the possibility of fluorescence-guided surgery in malignant gliomas. The most used fluorescence dyes for brain tumor surgery are 5-aminolevulinic acid (5-ALA) and indocyanine green (ICG). In this paper, a new fluorescence guided operation system, which can detect both 5-ALA and ICG fluorescent images simultaneously, is presented. This operation system consists of light emitting diodes (LEDs) which emits 410 nm and 740 nm wavelengths. We have performed experiments on rats in order to verify the operation of the newly developed operation system. Oral administration and imaging were performed to observe the fluorescence of 5-ALA and ICG fluorescence in rats. When LEDs at wavelengths of 410 nm and 740 nm were irradiated on rats, 628 nm wavelength with a violet fluorescence color and 825 nm wavelength with a red fluorescence color were expressed in 5-ALA and ICG fluorescent material, respectively, thus we were able to distinguish the tumor tissues easily. Previously, due to the poor resolution of the conventional surgical microscope and the fact that the color of the vein is similar to that of the tumor, the tumor resection margin was not easy to observe, thus increasing the likelihood for cancer recurrence. However, when the tumor is observed through the fluorescence guided operation system, it is possible to easily distinguish the color with the naked eye and it can be completely removed. Therefore, it is expected that surgical removal of cancerous tumors will be possible and surgical applications and surgical microscopes for cancer tumor removal surgery will be promising in the future.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.1015-1016
• /
• 2006

The important parameters deciding the fluctuation of Accumulation style surgical operation of ventriculus laser beam are smoothing capacitor, frequency and he characteristics of laser resonator. In this thesis, we control the fluctuation of medical $CO_2C$ laser in realtime by changing Duty-Ratio of IGBT and switching frequency with fixed the smoothing capacitor to improve the fluctuation of laser beam. We detect the light on laser resonator using a CdS photo sensor to improve ripple factor of laser beam and feedback fluctuated signals refined by a band pass filter into the control circuit to stabilize fluctuation actively. There is much to be desired in the realtime controlling technique of the light on Accumulation style surgical operation of ventriculus laser discharge tube in electrical signal. We propose switching control technique with microprocessor and photo sensing technique by controlling switch devices optimum operation and feedback signals detected by a photo sensor into the laser power supply in order to improve ripple factor of the $CO_2$ laser beam.

• 대한치과의사협회지
• /
• 제49권8호
• /
• pp.443-450
• /
• 2011

The leading paradigm of dentistry had been focused on the rehabilitation treatment that identifies active caries, manages them surgically, and restores their original functions. However, changes in the external environment including the current disease prevalence require dentistry to have a paradigm shift. The new paradigm suggests the detection of caries in their earlier stages over the visual diagnosis of cavities, and the reversal of the incipient caries by non-surgical approach. For this to be achieved, a high-technology detection device recognizing changes in the earlier stages which can not he visually observed is needed. Development of early caries detection device has recently become a major issue in preventive dentistry on account of this need, and QLF(Quantitified Light induced Fluorescence) conspicuously stands out among the newly released devices. In this study, the fundamental concept of QLF(Quantitified Light induced Fluorescence) and the possible clinical applications of the earlier intraoral camera model as well as the recently designed digital camera model will be discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권10호
• /
• pp.2679-2691
• /
• 2012

In this paper, a high accuracy stereo reconstruction method for surgery instruments positioning is proposed. Usually, the problem of surgical instruments reconstruction is considered as a basic task in computer vision to estimate the 3-D position of each marker on a surgery instrument from three pairs of image points. However, the existing methods considered the 3-D reconstruction of the points separately thus ignore the structure information. Meanwhile, the errors from light variation, imaging noise and quantization still affect the reconstruction accuracy. This paper proposes a method which takes the structure information of surgical instruments as constraints, and reconstructs the whole markers on one surgical instrument together. Firstly, we calibrate the instruments before navigation to get the structure parameters. The structure parameters consist of markers' number, distances between each markers and a linearity sign of each instrument. Then, the structure constraints are added to stereo reconstruction. Finally, weighted filter is used to reduce the jitter. Experiments conducted on surgery navigation system showed that our method not only improve accuracy effectively but also reduce the jitter of surgical instrument greatly.

• 한국융합학회논문지
• /
• 제6권1호
• /
• pp.43-48
• /
• 2015

본 연구는 수술실 무영등용 PMMA 렌즈를 무결함 상태로 사출성형하는 조건을 조사하였다. 렌즈 제작용 수지는 PMMA를 적용하였으며 금형은 자체 제작한 가열-냉각 방식의 금형을 사용하였다. 사출성형 시 금형의 가열온도가 낮을수록 플라스틱 수지의 유동성에 영향을 미쳐 미성형이 발생하거나 웰드 라인, 플로우 마크가 발생하고, 가열온도가 높으면 휨 변형이 발생하였다. 이러한 결함은 냉각시간이 길어짐에 따라 PMMA 수지 결정화에 기인하는 것으로 판단된다. 본 연구를 통해 PMMA 수지로 결함이 없는 렌즈를 성형하는 최적의 조건은 금형 코어의 가열온도는 110[$^{\circ}C$]였으며, 냉각시간은 25[sec]임을 밝혀내어 최적의 가열-냉각 온도 프로파일링을 확립하는 계기를 마련하였다. PMMA소재를 이용한 광학렌즈의 제작은 낮은 생산단가를 구현할 수 있으며 이로 인해 수술실 무영등에 적용된 플라스틱 광학렌즈에 적극 활용될 것으로 기대된다.

• Journal of Yeungnam Medical Science
• /
• 제19권2호
• /
• pp.126-135
• /
• 2002

신생혈관녹내장에 대한 MMC 섬유주절제술의 효과와 그 예후에 영향을 미치는 요인에 대해 알아보고자 하였다. 신생혈관녹내장으로 진단하고 MMC 섬유주절제술을 시행한 55명, 62안을 대상으로 의무기록을 후향적으로 조사하였다. 수술 성공 여부의 기준은 술후 안압하강제 사용에 관계없이 술후 최종 안압이 21 mmHg이하이며 시력상실이 없는 경우를 성공으로 판정하였고, 술전 시력이 광각이상의 환자에서 광각이 소실된 경우와 광각무인 환자에서 안구위축이 발생한 경우 및 안압하강을 위해 추가적 녹내장수술을 시행한 경우는 수술실패로 판정하였다. 평균 $23.9{\pm}16.2$개월의 추적 관찰 후 전체 62안 중 37안(60%)이 수술성공으로 판정되었다. Kaplan-Meier 생존분석을 이용한 수술 후 6개월, 12개월, 24개월, 36개월의 누적 수술성공률은 각각 85%, 71%, 57%, 52%이었다. 당뇨망막병증이 있는 경우가 다른 원인을 가진 경우보다 수술성공률이 더 높았고(p=0.005), 범망막광응고술을 시행한 경우에서 시행하지 않은 경우보다 수술성공률이 더 높았다(p=0.015). 하지만, 범망막광응고술의 시행여부는 Cox proportional hazard regression 분석법에 의해 섬유주절제술 실패의 의미있는 위험인자로 작용하지는 않았다. 결론적으로 신생혈관녹내장은 원인질환이 당뇨망막병증의 경우 MMC를 사용한 섬유주절제술의 예후가 다른 원인질환에 의한 경우보다 양호하였으며, MMC를 이용한 섬유주절제술이 방수유출장치삽입술이나 모양체광응고술에 앞서 일차적 수술로 유용하다고 생각한다.