• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.29-35
• /
• 2005

This paper presents a novel prototype of an active auxiliary quasi-resonant snubber(Auxiliary Quasi-Resonant Commutation Block-Link; ARCB)-assisted three phase voltage source soft switching space voltage vector modulated PFC rectifier, which uses Zero Voltage Soft Switching (ZVS) commutation. The operating principles of this digitally-controlled three phase soft switching PWM-PFC rectifier system with an instantaneous power feedback scheme are illustrated and its steady-state performance is evaluated using computer-aided simulation analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.249-250
• /
• 2008

In this paper, we propose the single polycrystalline silicon flash EEPROM IC with a new structure which does not need the high voltage switching circuit. The design of high voltage switching circuits which are needed for the data program and erase, has been an obstacle to develop the single-poly EEPROM. Therefore, we has proposed the new cell structure which uses the low voltage switching circuits and has designed the full chip. A new single-poly EEPROM cell is designed and the full chip including the control block, the analog block, row decoder block, and the datapath block is designed. And the each block is verified by using the computer simulation. In addition, the full chip layout is performed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.13-21
• /
• 2020

This paper proposes a sign reversal channel switching method in space-frequency block code for orthogonal frequency division multiplexing system. In case of sending source data on other antenna, it is necessary for the receiver to change combining method according to the channel variation. If one does not know the predefined channel switching sequence, it is not possible to decode the received data precisely. In transmit data symbols' exchanges for a channel switching, data symbols are exchanged according to a format of space-frequency block code. In this paper, we proposes a simple sign reversal method except exchanging data symbols between transmit antennas. It is shown that this method occurs another combining method for a simple encryption in the receiver.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.721-724
• /
• 2006

This paper presents a method of the constructing the digital logic switching functions and realizing the circuit design using partition techniques. First of all, we introduce the necessity, background and concepts of the partition design techniques for the digital logic systems. Next, we discuss the definitions that are used in this paper. For the purpose of the circuit design for the digital logic switching functions, we discuss the extraction of the partition functions. Also we describe the construction method of the building block, that is called the building block, based on each partition functions. And we apply the proposed method to the example, and we compare the results with the results of the earlier methods. In result, we describe the control functions, it means that we obtain the effective cost in the digital logic design for any other earlier methods.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.168-174
• /
• 2001

In this paper, a new space vector RPPWM (Random Position PWM) is proposed. In the proposed RPPWM, each of three phase pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. Along with the randomization of the PWM pulses, we can obtain the effects of spread spectra of voltage, current as in the case of randomly changed switching frequency. To verify the validity of the proposed RPPWM, simulation study was tried using Matlab/simulink. The main model described in Simulink block diagrams includes the space vector modulation block, pulse position randomization block, inverter block, 3 phase induction motor block, and so on. By the simulation study, the harmonics of the output voltage, and the current of inverter are predicted in different PWM methods- SVPWM, LLPWM, proposed RPPWM.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.507-510
• /
• 2003

This paper presents a novel prototype of tile three-phase bridge power block module type a auxiliary resonant AC link snubber circuit, which is effectively used for the three-phase voltage source type sinewave soft switching PWM inverter using IGBTs. Its operating principle Is described for current source load model, along with its practical design approach based on the simulation data. The performance evaluation of the three-phase voltage source type snewave soft switching PWM inverter incorporating a single three-phase bridge mo여le of active auxiliary resonant AC link snubber treated here Is illustrated, which is concerned with power duality efficiency power loss analysis. This inverter is discussed as compared with those of tile three-phase voltage source type sinewave hard switching PWM inverter. The power loss analysis of this soft switching PWM Inverter using IGBT power modules is evaluated on the basis of the measured v-i characteristics and switching power losses of IGBT, and antiparaliel diodes. The practical effectiveness of this inverter is proven by the power loss analysis for distributed power supply.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.162-167
• /
• 1999

In Auxiliary block of High speed train Power factor correction and Harmonics reduction is very important issue for efficient energy transport. The GTO-equipped PWM converter is used for traction untill resently. but the rising power capability of IGBTs resently allows to build IGBT-equipped PWM converter with a considerably increases switching frequency. In this paper presents switching pattern, control method, operation mode and tuned filter to reduce dc link voltage ripple for paralleled converter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.233-233
• /
• 2000

Direct torque control (DTC) scheme provides a very quick torque response without the complex field-orientation block and inner current regulation loop. DTC is known as an appropriate scheme for high power induction motet drives because it can be used at lower switching frequency. There are two major drawbacks with the application of DTC schemes : one is large current harmonics due to flux drooping in a low speed range, the other is that the inverter switching frequency is varying according to motor parameters and operating speed. Switching devices in the power electronics drives should be supported for relatively high switching frequency. In this paper, a P-type fuzzy controller to realize the variable switching sector scheme and a PID-type fuzzy switching frequency regulator are adopted. A meaningful contribution of this paper is to propose a simple realization scheme of the fuzzy switching frequency regulator. Simulation results show the effectiveness of those propositions.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.4
• /
• pp.737-757
• /
• 2011

This work is concerned with an optimal selling rule for a large position of stock in a market. Selling a large block of stock in a short period typically depresses the market, which would result in a poor filling price. In addition, the large selling intensity makes the regime more likely to be poor state in the market. In this paper, regime switching and depressing terms associated with selling intensity are considered on a set of geometric Brownian models to capture movements of underlying asset. We also consider the liquidation strategy to sell much smaller number of shares in a long period. The goal is to maximize the overall return under state constraints. The corresponding value function with the selling strategy is shown to be a unique viscosity solution to the associated HJB equations. Optimal liquidation rules are characterized by a finite difference method. A numerical example is given to illustrate the result.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.525-537
• /
• 2001

In this paper a new space vector RPPWM(Random Position PWM) is proposed. In the propsed RPPWM each of three phase pulses is located randomly in each switching interval. Based on the Space vector modulation technique the duty ratio of the pulses is calculated Along with the randomization of the PWM pulses. we can obtain the effects of spread spectra of votlage, current as in the case of randomly changed switching frequency, To verify the validity of the proposed RPPWM simulation study was tried using Matlab/Simulink The main model described in Simulink block diagrams includes the space vector modulation block pulse position randomization block inverter block 3 phase induction motor block and so on By the simulation study, the harmonics of the output voltage and the current of inverter are predicted in different PWM methods- SVPWM, LLPWM proposed RPPWM.