• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.691-693
• /
• 1998

A parallel processing systolic array reduces execution time of the Back-propagation ANN. But, systolic array must be designed whenever the number of neurons in the ANN differ. To use the systolic array which is aready designed ad a fixed size VLSI chip, partition of the problem size systolic array must be performed. This paper presents a design method of the fixed size systolic array for the Back-propagation algorthm using LSGP and LPGS partion method

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.29-32
• /
• 1992

In this paper, a systolic array structure is derived from the realization of 2-D IIR digital filters directed from the SFG(signal flow graph). After realized the 1-D formed partial systolic array, we implemented the complete systolic array to be cascaded 1-D form. The cascading of partial systolic arrays reduce the storage element which sued to delay input signal. 1-D systolic array is derived from that DG is designed through local communication approach and then it mapping to SFG. The derived structure is very simple and has high throughput because during new imput sample is supplied, new output is obtained every sampling period. And broadcast input signal is eliminated. Since the systolic array has property of regularity, modularity, local interconnection and highly synchronized multiprocessing, thus is very suitable for VLSI implementation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.132-140
• /
• 1997

This paper proposes systolic array architectures for compuataion of the 1-D and 2-D discrete wavelet transform (DWT). The proposed systolic array for compuataion of the 1-D DWT consists of L processing element (PE) arrays, where the PE array denotes the systolic array for computation of the one level DWT. The proposed PE array computes only the product terms that are required for further computation and the outputs of low and high frequency filters are computed in alternate clock cycles. Therefore, the proposed architecuter can compute the low and high frequency outputs using a single architecture. The proposed systolic array for computation of the 2-D DWT consists of two systolic array architectures for comutation of the 1-D DWT and memory unit. The required time and hardware cost of the proposed systolic arrays are comparable to those of the conventional architectures. However, the conventional architectures need extra processing units whereas the proposed architectures fo not. The proposed architectures can be applied to subband decomposition by simply changing the filter coefficients.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.61-67
• /
• 2003

We propose a systolic array for dynamic programming which is a technique for solving combinatorial optimization problems. We derive a systolic array for single source shortest path Problem, SA SSSP, and then show that the systolic array serves as dynamic Programming systolic array which is applicable to any dynamic programming problem by developing a systolic array for 0 1 knapsack problem, SA 01KS, with SA SSSP for a basis. In this paper, each of SA SSSP and SA 01KS is modeled and simulated in RT level using VHDL, then synthesized to a schematic and finally implemented to a layout using the cell library based on 0.35${\mu}{\textrm}{m}$ 1 poly 4 metal CMOS technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.45-52
• /
• 2005

A systolic array formed by interconnecting a set of identical data-processing cells in a uniform manner is a combination of an algorithm and a circuit that implements it, and is closely related conceptually to arithmetic pipeline. High-performance computation on a large array of cells has been an important feature of systolic array. To achieve even higher degree of concurrency, it is desirable to make cells of systolic array themselves systolic array as well. The structure of systolic array with its cells consisting of another systolic array is to be called super-systolic array. This paper proposes a scalable bit-level super-systolic amy which can be adopted in the VLSI design including regular interconnection and functional primitives that are typical for a systolic architecture. This architecture is focused on highly regular computational structures that avoids the need for a large number of global interconnection required in general VLSI implementation. A bit-level super-systolic FIR filter is selected as an example of bit-level super-systolic array. The derived bit-level super-systolic FIR filter has been modeled and simulated in RT level using VHDL, then synthesized using Synopsys Design Compiler based on Hynix $0.35{\mu}m$ cell library. Compared conventional word-level systolic array, the newly proposed bit-level super-systolic arrays are efficient when it comes to area and throughput.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1121-1124
• /
• 1987

Previous methods to map from a FORTRAN-like specification into a systolic array were difficult to find data dependencies because the specification was expressed and executed sequentially. Data-flow graph(DFG)s show data dependencies explicitly. In this paper we show a mapping tool from a DFG specification into a systolic array. We introduce the concept of a Systolic Pattern Stream(SPS) and use that concept to derive a systolic array.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.41-48
• /
• 2020

In this paper, we derive a common computational part in an algorithm that can simultaneously perform multiplication and square over finite fields, and propose a low-area bit-parallel systolic array that reduces hardware through sequential processing. The proposed systolic array has less space and area-time (AT) complexity than the existing related arrays. In detail, the proposed systolic array saves about 48% and 44% of Choi-Lee and Kim-Kim's systolic arrays in terms of area complexity, and about 74% and 44% in AT complexity. Therefore, the proposed systolic array is suitable for VLSI implementation and can be applied as a basic component in hardware constrained environment such as IoT.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.3
• /
• pp.117-124
• /
• 2000

A systolic array is a parallel processing system which consists of processing elements of basic computation capabilities, connected with regular and local communication lines. It has been known that a systolic array is on of effective systems to solve complicated communication problems occurred between densely connected neurons on ANN(Artificial Neural Network). In this paper, a systolic array simulator for the back-propagation ANN, which automatically constructs the proper systolic array for a given number of neurons of the ANN, is designed and constructed. With animation techniques of the simulators, it is easy for users to be able to examine the execution of the back-propagation algorithm on the designed systolic array step by step. Moreover the simulator can perform forward and backward operations of the back-propagation algorithm either in sequence or in parallel on the designed systolic array. Parallel execution can be performed by feeding continuous input patterns and by executing bidirectional propagations on all of processing elements of a systolic array at the same time.

• The Journal of Information Technology
• /
• v.10 no.3
• /
• pp.33-45
• /
• 2007

Systolic Array Processor is used for designing the special purpose processor in Digital Signal Processing, Computer Graphics, Neural Network Applications etc., since it has the characteristic of parallelism, pipeline processing and architecture of regularity. But, in case of using general design method, it has intial waiting period as large as No. of PE-1. And if the connected system needs parallel and simultaneous outputs, processor has some problems of the performance, since it generates only one output at each clock in output state. So in this paper, one dimensional Systolic Array Processor that is designed according to the dependance of data and operations using the partitioned sub-matrix is proposed for the purpose of improving the performance. 1-D Systolic Array using 4 partitioned sub-matrix has efficient method in case of considering those two problems.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1995.11a
• /
• pp.163-172
• /
• 1995

In this paper, the bit-level 1-dimensionl systolic array for modular multiplication are designed. First of all, the parallel algorithms and data dependence graphs from Walter's Iwamura's methods based on Montgomery Algorithm for modular multiplication are derived and compared. Since Walter's method has the smaller computational index points in data dependence graph than Iwamura's, it is selected as the base algorithm. By the systematic procedure for systolic array design, four 1-dimensional systolic arrays ale obtained and then are evaluated by various criteria. Modifying the array derived from 〔0,1〕 projection direction by adding a control logic and serializing the communication paths of data A, optimal 1-dimensional systolic array is designed. It has constant I/O channels for modular expandable and is good for fault tolerance due to unidirectional paths. And so, it is suitable for RSA Cryptosystem which deals with the large size and many consecutive message blocks.