• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.251-257
• /
• 2010

The purpose of this study was to examine the demographic characteristics, oral health awareness and oral health behavior of 1,356 Korean senior citizens based on the fourth raw materials of the 2008 national health and nutrition survey, and to analyze their DMFS, DMFT and FS-T indexes, which were oral health indicators. The findings of the study were as follows: 1. The mean DMFS index of the Korean senior citizens was 26.62, and their average DMFT index was 6.76. Their mean FS-T index was 21.51. 2. Out of the demographic characteristics of the Korean elderly people, education made statistically significant differences to the DMFS(p<0.05) and FS-T(p<0.001) indexes, and whether they worked or not made statistically significant differences to the DMFT(p<0.01), DMFS(0.001) and FS-T(0.001) indexes. There were no significant gaps according to gender, age and presence or absence of a spouse. 3. The oral health awareness of the Korean senior citizens(subjective oral health status, whether to need a dental treatment, concern for oral health and mastication) had no statistically significant relationship to their DMFS, DMFT and FS-T indexes. 4. Among the oral health behaviors of the Korean elderly people, whether they got a dental checkup over the past year made statistically significant differences to the DMFT(p<0.01), DMFS(p<0.001) and FS-T (p<0.001) indexes, and there were statistically significant gaps in the DMFT(p<0.010, FS-T(p<0.01) and DMFS(p<0.001) indexes according to yesterday's toothbrushing frequency. The time when they went to a dentist made a significant difference to the FS-T(p<0.01) index only.

• Investigative Magnetic Resonance Imaging
• /
• v.1 no.1
• /
• pp.135-141
• /
• 1997

Purpose: To assess the usefulness of breath-hold fast MR imaging of liver with fat suppression (FS) by application of chemical saturation technique in the diagnosis of regional fatty changes suspected in sonography. Materials and Methods: Thirteen patients who had focal lesions with diffuse, homogeneous signal changes after FS through chemical saturation technique without additional changes of imaging parameter during MR imaging of liver were selected. T1-weighted fast low-angle shot and T2-weighted turbo spin-echo sequences were obtained with or without FS during each single breath-holding session. Subjective changes of signal intensity between the pre-FS and the FS images were compared with the sonographic findings in each lesion. Results: Seven lesions of decreased signal intensity after FS on T1 or T2-weighted images, including three lesions only at FS T1 images, were regarded as focal fat infiltration. All seven lesions had compatible sonographic findings as homogenously echogenic areas. Another six lesions of subjectively increased signal intensity including two lesions only at FS T2 images were regarded as focal fat sparing. All six lesions had sonographic findings as homogenous echo poor areas suggesting focal fat sparing. In cases regarded as fat infiltration, score changes were more prominent at FS T1 images than FS T2 images(p=0.0002). In cases regarded as fat sparing, score changes were more prominent at FS T2 images than FS T1 images(p=0.042). Conclusion: Breath-hold fast T1 and T2-weighted MR imaging with and without chemical saturation pre-pulse may be sufficient for characterization of regional fatty changes in the differential diagnosis of focal hepatic lesion found at sonography.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.1
• /
• pp.31-35
• /
• 2012

To test the real image quality of a spectral attenuated inversion-recovery (SPAIR) fat-suppression (FS) techniquein clinical abdominal MRI by comparison to turbo spin echo inversion-recovery (TSEIR) fat-suppression (FS) technique. 3.0T MRI studies of the abdomen were performed in 30 patients with liver lesions (hemangiomas n: 15; HCC n: 15). T2W sequences were acquired using SPAIR TSEIR. Measurements included retroperitoneal and mesenteric fat signal-to-noise (SNR) to evaluate FS; liver lesion contrast-to-noise (CNR) to evaluate bulk water signal recovery effects; and bowel wall delineation to evaluate susceptibility and physiological motion effects. SPAIR-TSEIR images produce significantly improved FS and liver lesion CNR. The mean SNR of the retroperitoneal and mesenteric fat for SPAIR were 20.5, 10.2 and TSEIR were 43.2, 24.1 (P<0.05). SPAIR-TSEIR images produced higher CNR for both hemangiomas CNR 164.88 vs 126.83 (P<0.05) and metastasis CNR 75.27 vs 53.19 (P<0.05). Bowel wall visualization was significantly improved using in both SPAIR-TSEIR (P< 0.05). The real image quality of SPAIR was better than over conventional TSEIR FS on clinical abdominal MRI scans.

• Journal of the Korea Convergence Society
• /
• v.10 no.2
• /
• pp.49-56
• /
• 2019

This study was to examine whether an elderly can health-related quality of life(EQ-5D) by the mediating effect of dental health determinants on the association between health practice behavior and EQ-5D. The analysis was conducted on 1,311 of above the age of 65 in elderly by using raw data from the 2015 National Health and Nutrition Survey. The data were analyzed using SPSS for windows version 24.0 and SPSS PROCESS-macro. The health practice behavior and EQ-5D by living arrangement were the highest in the one-generation family(4.62, 0.90) and the lowest the elderly living alone(4.40, 0.86). Also, analysis using the PROCESS macro indicated that the FS-T index has a mediating effect between health practice behavior and EQ-5D(${\beta}=.0011$, BCCI [.003~.0024]). These findings suggest that FS-T index is closely related to EQ-5D and this will be used as basic data for development of health promotion programs for elderly.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.25-30
• /
• 2012

Purpose : To compare the enhancement pattern of normal facial nerves on 3D-FLAIR and 3D-T1-FFE-F) sequences at 3.0 T MR units. Materials and Methods: We assessed 20 consecutive subjects without a history of facial nerve abnormalities who underwent temporal bone MRI with contrast enhancement between January 2008 and March 2009. Two neuroradiologists independently reviewed pre-/post-enhanced 3D-T1-FFE-FS and 3D-FLAIR images respectively with 2-week interval to assess the enhancement of normal facial nerves divided into five anatomical segments. The degree of enhancement in each segment was graded as none, mild or strong, and the results of 3D-FLAIR and 3D-T1-FFE-FS image sets were compared. Results: On 3D-FLAIR images, one of the two reviewers observed mild enhancement of the genu segment in two (10%) subjects. On 3D-T1-FFE-FS images, at least one segment of the facial nerve was enhanced in 13 (65%) subjects. At least one reviewer found that 17 of the 100 segments showed enhancement on 3D-T1-FFE-FS images, with the mastoid segment being the most commonly enhanced. Interobserver agreement on 3D-T1-FFE-FS images was good for enhancement of the normal facial nerve (${\kappa}$= 0.589). Conclusion: In contrast to 3D-T1-FFE-FS, normal facial nerve segments rarely showed enhancement on 3D-FLAIR images.

• Geomechanics and Engineering
• /
• v.21 no.6
• /
• pp.513-525
• /
• 2020

Slopes stabilised with piles are seldom analysed considering uncertainties in the parameters of the pile-slope system. Reliability analysis of the pile-slope system quantifies the degree of uncertainties and evaluates the safety of the system. In the present study, the reliability analysis of a slope stabilised with piles is performed using the first-order reliability method (FORM) based on Hasofer-Lind approach. The implicit performance function associated with the factor of safety (FS) of the slope is approximated using the response surface method. The analyses are carried out considering the design matrices formulated based on both the 2^k factorial design augmented with a centre run (2^k fact-centred design) and face-centered cube design (FCD). The finite element method is used as the deterministic model to compute the FS of the pile-slope system. Results are compared with the results of the Monte Carlo simulation. It is observed that the optimum location of the row of piles is at the middle of the slope to achieve the maximum FS. The results show that the reliability of the system is not uniform for different pile configurations, even if the system deterministically satisfies the target factor of safety (FS_t) criterion. The FS_t should be selected judiciously as it is observed that the reliability of the system changes drastically with the FS_t level. The results of the 2^k fact-centred design and FCD are in good agreement with each other. The procedure of the FCD is computationally costly and hence the use of 2^k fact-centred design is recommended, provided the response of the system is sufficiently linear over the factorial space.

• Transactions of Materials Processing
• /
• v.4 no.2
• /
• pp.169-179
• /
• 1995

Static restoration mechanism during hot interrupted deformation of Cu-Zn alloy was studied in the temperature range from $550^{\circ}C$ to $750^{\circ}C$ and at a constant strain rate of 0.1/sec. At a given temperature, the hot interrupted deformations were performed with variation of interrupted time $t_i$ form 1 to 50 sec and of interrupted strain ${\varepsilon}_i$ from 0.15 to 0.90. From the analysis of the values of the critical strain of ${\varepsilon}_c$ for tje initiation of dynamic recrystallization and the peak strain of${\varepsilon}_p$, the relationship ${\varepsilon}_c{\fallingdotseq}0.7{\varepsilon}_p$ was obtained. It was clarified that the softening of the interrupted deformation was mainly the static recrystallization and the fractional softening(FS) which was over 30% mostly confirmed this result. The fractional softening of the interrupted time $t_i$ especially and pre-strain. The FS increased with increasing strain rate, interrupted time and pre-strain. The change of microstructures after hot deformation could be predicted by the FS. when the FS was 30~100%, static recrystallization was happened and grain growth was observed at the condition which was $750^{\circ}C$ deformation temperature, 0.45 prestrain and this condition's FS value was over 100%.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.92-97
• /
• 2000

The treatment of the washout from small scale incinerator was performed physically, chemically and biologically. The results are as follows. 1. SS, FS removal efficiency of washout wastewater from incinerator was 67.4%, 37.4%, while SS, FS of sewage wastewater was removed 63.2% 35.4% respectively. 2. The optimal conditions for chemical coagulation turned out to be pH 7.5, alum(Al2O3 10%) 30ml/ι and polyelectrolyte(A-601P 0.1%) 4ml/ι. SS 86%, FS 89.5%, BOD 42.5% and CODMn, 63.5% was removed and the removal efficiency of some metals are shown as Pb 93.5%, Zn 86.5% and Fe 80.6%. The concentration of the effluent was SS 9mg/ι, BOD 98.4mg/ι, and CODMn 138.4mg/ι. 3. The removal efficiency in treating washout wastewater of incinerator through HBC-briquet media was getting higher with increasing HRT, and mixed wastewater with 1:1, 1:2 ratio could be met up to the standard limit with higher HRT than 12hr. Under the condition of 1:2 mix ratio and HRT 24 hr, removal efficiency of SS, BOD, CODMn, T-N and T-P was 92.1%, 90%, 87%, 48.2% and 48%, respectively, and the concentration of treated wastewater was SS 2.9 mg/ι, BOD 10.3mg/ι, CODMn 14.1mg/ι, T-N 11.6 mg/ι and T-P 1.3 mg/ι, respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.238-239
• /
• 2001

sub-30fs 펄스폭의 상용 Ti：sapphire 레이저시스템에 대한 펄스압축기 및 2차 조화파 발생기를 제작하여 특성을 평가하였다. 그림la에서 82MHz의 주파수로 모드록되는 상용 Ti：sapphire 레이저 (Spectra-Physics Millennia/Tsunami laser)의 출력이 반사경 Ml, M2를 거쳐 펄스압축기에 입사되고 압축되어 나온 펄스가 다시 M6, M7를 거쳐 2차 조화파발생기로 입사되는 2단구조로 설계되었다. 압축기에 입사되기전 평균파워는 파장 800nm에서 520mW로 측정되었으며, 측정된 스펙트럼 반치폭 47nm에 (그림 2a)에 대해 chirp-free sech$^2$t 펄스로 가정할 경우 본 레이저시스템의 변환한계 펄스폭은 14.5fs로 계산된다. (중략)

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.296-301
• /
• 2009

This study investigated the effects of fermented soybean (FS) on growth and meat quality in pigs. A total thirty-six pigs were divided into 2 groups (2 treatment$\times$18 pigs each) and fed the experimental diets for 4 wk as follows: control (FS free); and T1 (FS 1%). The pigs in T1 had a higher feed efficiency compared with pigs fed control diets. pH was also significantly higher in the T1 group (p<0.05). Water-holding capacity measured in T1 was slightly higher than that of the control. Cooking loss in T1 was significantly lower than controls (p<0.05). CIE $L^*$ and CIE $b^*$ value were significantly higher in the control (p<0.05), but CIE $a^*$ value of T1 was higher than control (p<0.05). The drip loss of T1 were significantly lower than controls (p<0.05). Sensory characteristics of the treatment group showed higher than controls (p<0.05). These results showed that FS could be served as a favorable feed additive and feedstuff for enhancing pork quality.