• Journal of Integrative Natural Science
• /
• v.12 no.3
• /
• pp.69-73
• /
• 2019

Taguchi has used the signal-to-noise ratio (SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Taguchi has dealt with having constraints on both the mean and variability of a characteristic (the dual response problem) by combining information on both mean and variability into an SN. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for parameter design to solve the dual response problems without resorting to SN.

• Journal of Integrative Natural Science
• /
• v.11 no.2
• /
• pp.76-81
• /
• 2018

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Product array approach which is used in the Taguchi parameter design has a number of advantages by considering the noise factor. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. Taguchi has used the signal-to-noise ratio (SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for robust design using desirability function without resorting to SN.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.548-553
• /
• 1998

The specific noise level of 18 rotary compressor mufflers were measured and these data were analyzed by the Taguchi robust design method and the neural network. The optimal design value obtained by the neural network generally showed good agreement with that by the Taguchi method. The effects of eight important design variables on the specific noise level were discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.638-642
• /
• 2003

This paper presents a parameter design of an Electrorheological(ER) panel for noise reduction using Taguchi method. Taguchi method is a robust design method that determines control parameters in the presence of noise effect. Host structure thickness, spacer thickness, base oil viscosity and the weight ratio of ER particles are chosen for the control factors. A test setup in an SAE J1400 facility is used to analyze the sound transmission loss. The sensitivity of each factor with signal-to-noise(S/N) ratio and analysis of variance are investigated. The analysis results show that the weight ratio of ER particle and base oil viscosity of the ER fluid mostly affects the noise reduction in the presence of electric field. Based on the Taguchi method, an optimal configuration was designed and comparison is made with experimental result fer the verification.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.157-162
• /
• 2003

This Paper presents a robust design of an Electrorheological(ER) damper using Taguchi method. Taguchi method is a robust design method that determines control parameters in the presence of noise effect. Electrode length, electrode gap, base oil viscosity and the weight ratio of ER particles are chosen for the control parameters and the temperature is considered to be a noise factor. The sensitivity of each factor with signal-to-noise(S/N) ratio and analysis of variance are investigated. The analysis results show that the electrode length and base oil viscosity of the ER fluid mostly affect the damping force in the absence of electric field. On the other hand, when the voltage is applied to the ER damper, the electrode length and the weight ratio of ER fluid exhibit significant effect. Based on the Taguchi method, an optimal configuration was designed and the robustness of the designed ER damper was validated by comparing the analysis and experimental results.

• Journal of Integrative Natural Science
• /
• v.10 no.1
• /
• pp.51-57
• /
• 2017

The Taguchi parameter design in industry is an approach to reducing performance variation of quality characteristic in products and processes. In the Taguchi parameter design, the product array approach using orthogonal arrays is mainly used. It often requires an excessive number of experiments. An alternative approach, which is called the combined array approach, was studied. In these studies, only single response was considered. In this paper we propose how to simultaneously optimize multiresponse for the robust design using the combined array approach.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.131-138
• /
• 2004

In the proto design stage of a new car, the performances of an occupant protection system can be evaluated by CAE even though the real test should be carried out. The number of the real test is reduced by the exact predictions followed by the appropriate design recommendation. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters. That often leads to inconsistency between test and CAE. In this research, the robust design of a protection system such as airbag and load limiter is suggested considering the frontal crash. The parameter design scheme of the Taguchi method is introduced to obtain the robust design of arbitrary airbag and load limiter. It is performed based on the frontal crash test condition of US-NCAP with an arbitrary passenger car. The variances of the performances such as HIC, chest acceleration and probability of combined injury are calculated by the outer array and the Taylor series expansion. Through the analysis of the Taguchi method, the robust optimum is determined.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.97-105
• /
• 2009

Optimal design of a roller rail which replaces the ball rail for three-door refrigerators is presented using the finite element analysis and the Taguchi method. Stress and deformation of the roller rail for an initial design are analyzed and evaluated. Optimal design parameters are determined using the Taguchi method. The maximum stress of the optimal design is favorably reduced comparing to the initial design. It is verified through an additional analysis that the drawer on the roller rail will not be derailed even if one opens the drawer with a transverse force.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.407-410
• /
• 2007

In the RRH (Radio Remote Head) of a WCDMA Node B System, an HPA (High Power Amplifier) is used in order to amplify the transmission RF signal. Upon designing an HPA, the design requirements demand that the intermodulation characteristics are optimized during design and that the stability of the characteristics is maintained in the field. In this DOE (Design of Experiments) research, a few vital factors that affect intermodulation characteristics were first selected; then, an optimal solution was produced for high reliability in a noisy environment in the field by employing the Taguchi Method, a statistical method used for a robust design. Furthermore, by employing HALT(High Accelerated Life Test) during the verification test, this experiment has verified that an HPA that was designed using the Taguchi Method proved to be a far more robust design than an HPA that was designed without using the method.