• Journal of the Korean Institute of Navigation
• /
• v.11 no.2
• /
• pp.53-59
• /
• 1987

This paper describes the design theory of a weakly-coupled Tap-off with high density of coupling intervals for CATV and/or MATV systems, by which the degree of freedom in design and density of coupling intervals are significantly increased compared with the intrinsic one. It is also described how to construct the two-way divider (Tap-off) in the generalized type. Furthermore, the practical measurements of the frequency characteristics for a fabricated circuit show very good agreements with theoretical results.

• Journal of Powder Materials
• /
• v.22 no.2
• /
• pp.111-115
• /
• 2015

This study investigates the microstructure and thermal shock properties of polycrystalline diamond compact (PDC) produced by the high-temperature, high-pressure (HPHT) process. The diamond used for the investigation features a $12{\sim}22{\mu}m$- and $8{\sim}16{\mu}m$-sized main particles, and $1{\sim}2{\mu}m$-sized filler particles. The filler particle ratio is adjusted up to 5~31% to produce a mixed particle, and then the tap density is measured. The measurement finds that as the filler particle ratio increases, the tap density value continuously increases, but at 23% or greater, it reduces by a small margin. The mixed particle described above undergoes an HPHT sintering process. Observation of PDC microstructures reveals that the filler particle ratio with high tap density value increases direct bonding among diamond particles, Co distribution becomes even, and the Co and W fraction also decreases. The produced PDC undergoes thermal shock tests with two temperature conditions of 820 and 830, and the results reveals that PDC with smaller filler particle ratio and low tap density value easily produces cracks, while PDC with high tap density value that contributes in increased direct bonding along with the higher diamond content results in improved thermal shock properties.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.989-994
• /
• 1994

This study aims at finding the closest packings of regular shape particles such as sphere, circle rod and hexagonal rod type. As the ratio of particle size to container lowered to less than 1/10, the wall effect decreased gradually. The tap density of spherical particles with almost orthorhombic arrangement was 59.5%, while those of circle rod and hexagonal rod type particles were 63.5% and 63.0% respectively. And it was decreased with increasing the aspect ratio of regular particles. The tap density of binary mixtures was larger than that corresponding to the monosized particles packing by about 15%. The tap density of ternary mixtures was larger than that of corresponding to the packing of binary mixtures by about 9%. This work employed the binary mixture of 60% coarse particles and 40% fine particles with size ratio of 1.0 to 1/10 and the ternary mixture of 60% coarse particles, 20% medium and 20% fine particles with size ratio of 1:1/10:1/400 respectively.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.117-121
• /
• 1996

육각판상 Ba-ferrite의 stacking 현상은 자성도료의 도포 후 자장배향를 행할 때 일어나는 것으로 알려져 있으나 분말의 건식분쇄시에도 일어났다. Edge mill을 사용하여 건식분쇄할 때 치환형 Ba-ferrite 분말의 보자력과 tap density는 거의 비례적으로 증가하였고, 분쇄시간보다는 가해지는 압력에 크게 의존하였다. 이 때 보자력의 증가원인은 분쇄시 생성되는 입자간의 stacking 현상에 기인된 것임을 투과전자현미경 관찰로부터 확인하였다. 분말의 tap density가 증가함에 따라 tape에서 분산초기의 광택도가 크게 감소되어 분산성은 떨어졌으나, 배향도는 tap density 1.3 g/$cm^{3}$에서 최대를 나타내었다. 과도한 건식분쇄에 의해 생성된 강고한 stacked cluster는 자성도료 제조시 분산성과 배향도를 동시에 떨어뜨리는 역할을 함을 알 수 있었다.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.2
• /
• pp.92-100
• /
• 1995

To increase the capacity of positive electrode materials for matching the high capacity negative electrode materials in alkaline rechargeable batteries, high-density nickel hydroxide powders were made through a continuous process from nickel sulfate reacted with ammonia and sodium hydroxidc. The effect of operating conditions on structure, shape, size distribution, apparent density and tap density of powders were investigated. Crystal structure of nickel hydroxide powder was hcp according to Bravais Lattice. The increase of mean residence time promoted the growth of (101) plane. The shape of powder was nearly spherical. Their size was in the range of $2~50\mu\textrm{m}$. The size distribution of the powders prepared was narrower than that of commercially obtained nickel hydroxide. Apparent density and tap density were 1.6~1.7g/cc and 2.0~2.1g/cc, respectively.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.998-1004
• /
• 1987

This paper describes the design theory of a weakly-coupled Tap-off with high density of coupling intervals for CATV ynd/or MyTV systyms, by yhich the degree of freedom in design and density of coupling intervals are significantly increased compared with the intrinsic one. It is also described how a 2-way power divider(Tap-off) is constructed in the generalized type. Furtuermore, the practical measurements of the frequency characteristics for a fabricated circuit show very good agreements with theoretical results, and, hence, the validity of the proposed design and analyses methods are confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.425-433
• /
• 1994

The conventional weakly-coupled tap-off for CATV and/or MATV transmitting circuits has been fabricated empirically and experimentally. So, the theoretical analysis or the design method of the conventional one has not been established, the characteristics of which were not good. To solve these problems, we have proposed a modified weakly-coupled freedom in design. This paper describes the design theories and analysis method of the theoretical frequency characteristics of a Modified Weakly-coupled Tap-off with high density of coupling intervals for CATV and/or MATV system. From the theoretical analysis it has been shown that the frequency characteristics of the tap-off proposed here are improved much in comparision with the conventional one. Furthermore, the practical measurements of frequency characteristics for the fabricated circuits show agreement with the theoretical results, and hence, the validity of proposed design and analysis methods has been confirmed.

• Clean Technology
• /
• v.29 no.4
• /
• pp.249-254
• /
• 2023

In this study, porosity estimation was conducted by the physical properties of zeolite. Because of the difficulty of directly measuring the porosity of particulate matter, the porosity was calculated by applying the measured physical properties of zeolite to the calculation formula presented in various literature. For this purpose, the average particle size, particle size distribution, specific surface area, and pore characteristics of three types of zeolite - zeolite beta, zeolite Y, and ZSM-5 - were measured. In addition, the true density using gas and liquid phases, and two types apparent density (tap and untapped density) were measured. We calculated the porosity using these results, compare and analyzed the results, and evaluated main factors that determine the porosity.

• Korean Journal of Microbiology
• /
• v.31 no.3
• /
• pp.245-254
• /
• 1993

Distribution and variation of bacterial densities of heterotrophic plate count (HPC) and Enterobacteriaceae in the water supply systems comprising raw, treated, and three tap water samples of a water treatment plant in Seoul were studied 23 times from 1991 to 1992. HPC bacteria of raw. treated, and tap waters on $R_{2}A$ agar media were at a density of $1.22{\times}10^{3} to 3.05{\times}10^{5}$, $1.50{\times}10^{1} to 4.29{\times}10^{3}$ and 2 to $5.41{\times}10^{3}$ cfu/ml, respectively. Densities of Enterobacteriaceae in raw, treated, and tap waters on mENDO-LES agar media ranged from 0.] to 8200 cfu/ml, 0 to 17.5 cfu/JOO mI. and 0 to 47.5 cfu/IOO ml, respectively. Injured Enterobacteriaceae of treated and tap waters on m-T7 agar media were at a density of o to 27 and 0 to 35 cfu/100 mI. These results showed that the density of bacteria in the treated water outflowing from the water plant significantly increased as the water flowed along the distribution sytems, which is so-called bacterial regrowth. The predominant bacteria] types in the water supply system were Pw'udomonas and Acinerobacter. In raw water, the ratio of Pseudomonas was higher than that of Acinetobaeter, but in treated and tap waters. both ratios were reversed. The most predominant species of Enterobacteriaceae was Enterobacter agglomerans. Some species such as Citrobacter freundii. Escherichia coli. Klebsiella pneumoniae. and Shigella dysenteriae which are opportunistic pathogens or pathogens were not found in the treated water but additionally detected in tap waters.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.3
• /
• pp.135-142
• /
• 2012

Over the past few years, $LiFePO_4$ has been actively studied as a cathode material for lithium-ion batteries because of its advantageous properties such as high theoretical capacity, good cycle life, and high thermal stability. However, it does not have a very good power capability owing to the low lithium-ion diffusivity and poor electronic conductivity. Reduction in particle size of $LiFePO_4$ to the scale of nanometers has been found to dramatically enhance the above properties, according to many earlier reports. However, because of the intrinsically low tap density of nanomaterials, it is difficult to commercialize this method. Many studies are being carried out to improve the volumetric energy density of this material and many methods have been reported so far. This paper provides a brief summary of the synthesis methods and electrochemical performances of micro-spherical $LiFePO_4$ having high volumetric energy density.