• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.336-341
• /
• 2007

To investigate the variations of physico-chemical factors and microbial population, in ten stations at water region of coastal area of Chagwi-Do, Nutritive salts, water temperature, transparency, suspended solid, salinity, COD, DO, pH, heterotrophic bacteria, were analysed three times in September, November in 2004 and February in 2005. Heterotrophic bacteria in surface water was $3.5\times10^1\sim1.16\times10^3\;cfu\;mL^{-1}$, $0.4\times10^1\sim5.6\times10^1\;cfu\;mL^{-1}$, $0.4\times10^1\sim7.8\times10^1$ and bottom water counted $4.5\times10^1\sim1.0\times10^3\;cfu\;mL^{-1}$, $1.2\times10^1\sim1.5\times10^2\;cfu\;mL^{-1}$, $0.4\times10^1\sim4.4\times10^1\;cfu\;mL^{-1}$ in September, November 2004 and February 2005, respectively. The dominant species isolated from the coastal area of Chagwi-Do were identified to be Vibrio spp., Pseudoalteromonas spp. Psuedomonas spp, Bacillus spp., Alteromonas spp., Aeromonas spp., Psychrobacter spp., and Flavobacterium spp.

• Korean Journal of Environmental Biology
• /
• v.28 no.3
• /
• pp.115-124
• /
• 2010

In order to find out the short-term phytoplankton dynamics during summer season in Jinhae Bay, we investigated the environmental factors and phytoplankton population densities at 16 stations. A total of 66 phytoplankton species were appeared, diatoms occupied more than 80% of total species, and the others were dinoflagellates and raphidophyceaes. The dominant species were diatoms Chaetoceros affinis, C. didymus, C. pseudocurvisetus, Leptocylindrus danicus, Pseudonitzchia pungens, Skeletonema costatum and dinoflagellates Cochlodinium polykrikoides, Gymnodinium impudicum, Karenia mikimotoi, Prorocentrium minimum, Protoperidinium bipes and Scrippsiella trochoidea. According to multidimensional scaling (MSD) and cluster analysis based on phytoplankton community data from each station, the Jinhae bay was divided into two groups. The first group included stations in the inner part of Masan Bay, which is strongly influenced by high nitrogen loading and low salinity by river discharge. The second group included the other remained stations. Based on canonical correspondence analysis (CCA), small-size dinoflagellates K. mikimotoi, P. minimum, P. bipes and S. trochoidea and centric diatom C. pseudocurvisetus and S. costatum, which is dominanted in the inner area of bay, were related with DIN (ammonium, nitrate, nitrite). These results imply that the study area was grouped into the two water masses (inner and outer water of Masan Bay) and inner waters had higher phytoplankton abundances and Chl.a concentration than outer waters. As a result, summer phytoplankton peaks in the inner shallow bay were stimulated by increases in nitrogen and temperature.

• Korean Journal of Environmental Biology
• /
• v.28 no.3
• /
• pp.172-178
• /
• 2010

The bloom of the genus Stephanodiscus was gradually extinguished after 18 April. Counts of bacterial population were increased as the diatom bloom was disappeared. Numbers of the heterotrophic nanoflagellates and ciliates were also increased during the disappearance of the bloom. The densities of the mesozooplankton, the major predator of the diatoms, started to increase in April. However, their growth was suppressed during the bloom period of the diatoms (from January to March). During the bloom period of the diatoms, the monthly average value of the basic productivity amounted up to 11,765.7 mgC $m^{-2}day^{-1}$, which is relatively high value considering the low temperature and light during that period. The growth rate of phytoplankton in March, when the bloom was beginning to be supressed was 0.007. The growth rate of phytoplankton was negative value in April when the decreasing of the algal density was started.

• Korean Journal of Environmental Biology
• /
• v.25 no.3
• /
• pp.273-278
• /
• 2007

The cell numbers of heterotrophic bacteria inhabiting the surface and bottom sea water harvested from the 5 stations in the marine ranching ground of Tongyeong coastal waters in $2003{\sim}2007$ were examined, and species composition of the heterotrophic bacterial population and dominant species were analyzed as well. Sea water samples collected in summer season contained much higher number of heterotrophic bacteria than those harvested in winter, spring and autumn seasons due to the higher sea water temperature. However the cell number of heterotrophic bacteria did not show a significant dependence on the location of the sampling stations. The cell number of heterotrophic bacteria in the surface sea water harvested in October 2003 and in September 2004 was not discernibly different from that in the bottom sea water and sometimes the former was even fewer than the latter because of the typhoon and localized torrential downpour. The number of heterotrophic bacteria decreased every year. The main bacterial species were Pseudomonas fluorescens TY1, Pseudomonas stutzeri TY2, Acinetobacter lwoffii TY3, Sphingomonas paucimobilis TY4, Burkholderia mallei TY5, Pasteurella haemolytica TY6, Pasteurella multocida TY7, Comamonas acidovorans TY8, Actinobacillus ureae TY9 and Chryseobacterium indologenes TY10. P. fluorescens TY1 and A. lwoffii TY3 were found to be the dominant species.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.197-205
• /
• 2020

With the purpose of designing companion planting of groundcover plants for ornamental uses, this study identified the yearly growth characteristics of nine species of different life forms, analyzed the coverage characteristics of individual plants, and suggested combinations of plants suitable for each life form. Polygonatum odoratum var. pluriflorum, Liriope platyphylla and Hosta capitata, as short-grained plants that can grow to more than 20 cm, tended to grow for 60 days after planting in April and maintain their shape thereafter. Their aerial parts started to wither and enter dormancy after September. Saxifraga stolonifera, Dianthus chinensis and Sedum middendorffianum tended to continuously grow until September after planting in April and their growth declined after September. Lysimachia nummularia, as a creeping plant that grows creeping on the ground, started to show a rapid growth three months after planting. Sedum sarmentosum grew slowly until August and the aerial parts started to wither from September when the temperature decreases. The coverage characteristics of these nine species that grow differently after companion planting were surveyed and the growth of Sedum sarmentosum showed the highest number of companions. It was found that Hosta capitata can be companion planted with Sedum middendorffianum, Saxifraga stolonifera, and Lysimachia nummularia. These results indicate that among different shoot growth types species propagated with their stems creeping on the ground or those that can grow vegetatively with non-rhizome parts are more suitable for companion planting with others than those of which rhizomes branch.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.34-39
• /
• 2015

This study confirmed the characteristics of hydrogen production according to electrode materials by producing non-diaphragm alkaline water electroanalyzer that can be controlled at medium temperature to produce hydrogen. As a result of the electrochemical characteristics by electrode material ($IrO_2/Ti$, $RuO_2/Ti$, Ti), the highest efficiency was found in $RuO_2/Ti$, as a result of hydrogen production experiment by electrolyte concentration, electrolyte concentration has a tendency to be proportional to hydrogen production and the condition of 30% KOH showed the highest hydrogen production as $118.9m^3/m^3/day$. In the experiment that confirmed hydrogen production according to electrode materials, in case of combination of anode ($IrO^2/Ti$) and cathode ($RuO^2/Ti$), it was $157.55m^3/m^3/day$ that showed a higher hydrogen production by around 6.97% than that of $IrO^2/Ti$ and cathode. It is presumed that the improvement of electrochemical activation of DSA electrode increases hydrogen production and influences the improvement of durability compared to the former electrode so that it enables stable alkaline water electrolysis.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.73-82
• /
• 2016

The energy consumption efficiency in a variety of operational test mode was considered for domestic gas boiler below 70 kW. The energy efficiency test carried out in the experimental conditions similar to the actual operation status was analyzed and compared with the current Korean efficiency test method. Four types of test modes for each boiler(Non-condensing and condensing boiler) were carried out in the condition of laboratory mode(full load, steady state) and actual operating mode. Futhermore divided into two operational status for each of these, it was applied by maximum gas consumption and consumer sales conditions. Test equipment has the function referred to gas boiler standards, such as KS or European standard EN. The equipment should be continuously measured and record the measuring factors which are the flow volume of gas and water, laboratory temperature, water flow volume for heating, return water volume after heating and quantity of the exhaust gases(CO, NO, $NO_2$). The experimental results were found that non-condensing boiler efficiency of laboratory mode is about 10% higher than that of actual mode. In case of condensing boiler, the efficiency of laboratory condition is about 20% higher than that of the actual using conditions. I suggest that the government will gradually take the efficiency test method considering the actual conditions.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.79-87
• /
• 2010

Field water qualities (temperature, pH, Eh, EC, DO) was monitored by 6 times March to September 2009 on background water (BW) and acid mine drainage (AMD0, AMD1, AMD2 and AMD3 points), and flow rate was measured on AMD0 point. Acid mine drainage flowed out from abandoned Ilgwang mine were high acid waters that lower than pH 3, and Eh component was ranged 400 to 600 mV. EC measured on acid mine drainage were higher over 10 times than background water, DO component was increased by reaction on the air during the water flow from AMD0 point to AMD4 point. Heavy metal concentrations in acid mine drainage were ordered Fe > Cu > Zn > Mn > As > Cd, and Fe concentration was highest for 81.870~474.30 mg/L. Monitoring periods measured maximum concentrations of heavy metals were May for As and Cd, June for Fe, July for Cu, Zn and Mn. The periods measured minimum concentrations were monitored April for Cd and Mn, September for Fe, Cu, Zn and As. Discharge mass of heavy metal components were calculated 53.44 kg for Fe, 6.25 kg for Cu, 5.26 kg for Zn, 2.13 kg for Mn, 0.14 kg for As and 0.04 kg for Cd, respectively. Total discharge mass of heavy metal components were calculated 67.26 kg for 1 day, and Fe component was taken 79% of total mass.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.487-499
• /
• 2014

While the vertical open type of heat exchanger is more effective in areas of abundant groundwater, and is becoming more widely used, the heat exchanger most commonly used in geothermal heating and cooling systems in Korea is the vertical closed loop type. In this study, we performed numerical simulations of the optimal utilization of geothermal energy based on the hydrogeological and thermal properties to evaluate the efficiency of the vertical open type in areas of abundant groundwater supply. The first simulation indicated that the vertical open type using groundwater directly is more efficient than the vertical closed loop type in areas of abundant groundwater. Furthermore, a doublet system with separated injection and extraction wells was more efficient because the temperature difference (${\Delta}$) between the injection and extraction water generated by heat exchange with the ground is large. In the second simulation, we performed additional numerical simulations of the optimal utilization of geothermal energy that incorporated heat transfer, distance, flow rate, and groundwater hydraulic gradient targeting a single well, SCW (standing column well), and doublet. We present a flow diagram that can be used to select the optimal type of heat exchanger based on these simulation results. The results of this study indicate that it is necessary to examine the adequacy of the geothermal energy utilization system based on the hydrogeological and thermal properties of the area concerned, and also on a review of the COP (coefficient of performance) of the geothermal heating and cooling system.