• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.847-853
• /
• 2011

본 연구는 압출 시 성형온도를 유지하여 Zn-22Al 합금분말의 성형성을 향상시키는 하이브리드 분말 압출 공정의 개발 및 온도 유지시간이 압출된 스퍼기어의 기계적 특성에 미치는 영향을 조사하기 위해 수행되었다. 피치원 지름 1.8mm 의 소형 스퍼기어는 압출온도 290, 300, $310^{\circ}C$에서 성형되었다. 볼밀시간 32h 의 Zn-22Al 합금분말을 압출온도 $310^{\circ}C$에서 압출 시 표면 결함이 없는 소형 기어가 제조되었다. 경도분포는 기어 중심부와 치형부에서 불균일하였고 소결공정 후 내부 변형에너지의 차이로 인해 내부균열이 발생하였다. 위와 같은 문제를 해결하기 위해 온도 유지시간 제어를 이용한 하이브리드 압출 연구를 수행하였다. 압출된 스퍼기어의 평가는 압출하중, 비커스 경도 및 치수정밀도 측정을 통해 이루어졌다. 온도 유지시간 15min 에서 압출된 스퍼기어의 기계적 성질이 가장 우수하였다.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.246-252
• /
• 2016

Complex designed silica-based ceramic cores were fabricated by ceramic injection molding. Slow heating rate (0.2K/min) for debinding restrained bloating on the surface of ceramic cores. To investigate effect of sintering conditions on mechanical properties of ceramic cores, green bodies were sintered at temperatures in a range from $1150^{\circ}C$ to $1400^{\circ}C$ for various dwelling times (6 h to 48 h). Sintering above $1300^{\circ}C$ for 12 h and dwelling time over 24 h at $1200^{\circ}C$ reduce the flexural strength and increase the linear shrinkage of ceramic cores. Cristobalite, formed by high sintering temperature or long dwelling time, induces reduction of mechanical properties due to its phase transformation, which is accompanied by volume contraction and microcracking. Ceramic core sintered at $1200^{\circ}C$ for 12 h endured wax patterning and shell molding, and was manufactured successfully.

• 한국분말재료학회지
• /
• 제4권2호
• /
• pp.83-89
• /
• 1997

A finite element analysis to solve the coupled thermomechanical problem in the plane strain upsetting of the porous metals was performed. The analysis was formulated using the yield function advanced by Lee and kim and developed using the thermo-elasto-plastic time integration procedure. The density and temperature dependent thermal and mechanical properties of porous metals were considered. The internal heat generation by the plastic deformation and the changing thermal boundary conditions corresponding to the geometry were incorporated in the program. The distributions of the stress, strain, pressure, density and temperature were predicted during the free resting period, deformation period and dwelling period of the forging process.

• 한국재난정보학회 논문집
• /
• 제12권3호
• /
• pp.210-218
• /
• 2016

본 연구에서는 화재 해석 프로그램인 FDS와 Pathfinder를 이용하여 협소 거주공간의 사고재현을 위해 테스트베드의 화재를 시뮬레이션하였다. 해석 결과, 내부 구조 형태가 H형태인 경우가 피난대피 시간이 285초로 가장 빠르게 나타났다. 또한 실험 조건 중 출입구가 닫히고 스프링클러가 작동하는 경우가 온도의 분포가 가장 낮게 나타났으며, 이는 가시도와 연기농도에도 큰 영향을 끼치는 것으로 나타났다.

• 보존과학회지
• /
• 제38권1호
• /
• pp.64-71
• /
• 2022

Many investigations have been conducted on the biological damage and environmental conditions necessary to preserve the Janggyeong Panjeon and Daejanggyeongpan (woodblocks). We performed a survey on the concentration and diversity of airborne fungi in the Janggyeong Panjeon and compared them with the results of a survey from 2012. The temperature of the Beopbojeon building was slightly lower, while the relative humidity was higher than those found at the Sudarajang building. The concentration of airborne fungi in the Beopbojeon was 1.44-fold that of the Sudarajang. It was confirmed that the concentration and diversity of airborne fungi in the Janggyeong Panjeon differed depending on the sampling site. In total, 23 fungal genera were identified from the air samples, and 11 fungal and 1 bacterial genera were identified from the surface of the woodblocks. Among these, only five types of fungi were commonly distributed in the indoor air and surface of the Daejanggyeongpan; however, 58.3% of the fungi identified on the surface of the woodblocks were not observed in the in the air samples. The surface-dwelling fungi may accumulate dust to form microbial communities over time.

• Journal of Preventive Medicine and Public Health
• /
• 제2권1호
• /
• pp.77-80
• /
• 1969

In the cities nowadays, the dwelling conditions of Cackroach are provided by use of various kinds of construction material, installation of heating and cooling facilities that maintain moderate temperature, filthy sanitation, and lack of knowledge about insect as mechanical Vector. Cakroach is infectious disease Vector, and it proves to be of much importance in the public health. Considering such importance, the author has surveyed the distribution of Cackroach in the housing areas of Seoul City from May 1969 to the end of August 1969, and has come to the following conclusion: 1. House dwelling Cackroach collected in the City of Seoul are of two species, i. e. Blatella Germanica Linneaus and Periplaneta Japonica Karny. 2. Most of cackroach collected in Seoul are Blatella Germanica Linneaus and they are distributed in whole area of Seoul while that of Periplaneta Japonica Karny is distributed only in the limited area. 3. Dwelling places of Blatella Germanica Lineaus are in grog shop, Korean food restaurants, bakery shops, and patient rooms in hospitals. Many of them are found in tile kitchens and dining rooms of restaurants, and tearooms. They live in groups at older houses with much crack, warm and humid places. 4. For method of collection, the hand collection was the most effective. In trap collection during the day time, when the trap is placed at the narrow corners off the ground after confirming the dwelling places of cackroach, the match trap was more effective than the flask trap in collecting. In case of collecting during the night time, the flask trap was much more effective method than the match trap.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.23-31
• /
• 2012

Recent research on stand-alone focused on the improvement and development of functions for solving problems such as the limited operating time of stand-alone installed at dwelling and their low reliability caused by false alarms, but it is more urgent to study on the operating range of stand-alone sensor in consideration of the impacts of combustion products on residents because the primary goal of fire safety is minimizing casualties. This study purposed to propose the optimized operating range of stand-alone sensor in consideration of the impacts of combustion products on residents. For this purpose, we made a mathematical approach to the change of temperature over the lapse of time in compartment fires similar to house fires, and established the standards of the body's response against heat and smoke based on literature review. In addition, we surveyed domestic and foreign technological standards for stand-alone sensor, and converted them to standards for residents of the body's response against heat and smoke using mathematical model equations and analyzed them comparatively.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.325-330
• /
• 2006

Modern people spend more and more time in an automobile in their daily life. In this life, drivers and passengers should create HVAC environment in the automobile interior which is not only for convenient transportation but also give comfortable feeling with dwelling culture. Also, the latest cars give much importance for the role of HVAC system that controls the environment of the area for passengers more than just basic capability. There are solar radiant heat, surface temperature, refrigeration system(temperature, humidity, air current, velocity), and dust for the factor which have an effect on the HVAC environment in the automobile interior, also these are being carried for the HVAC environment delivered an individual character. In this study, we drew the automobile interior as three dimension and arranged a method of numerical analysis on HVAC environment in the automobile interior displaying air current distribution and temperature distribution through simulation of the automobile interior on the ventilation volume and outlet area. The aim of this study is to develop the estimated method for HVAC environment. in the automobile interior.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.176-182
• /
• 2018

심미 치과보철물의 가장 중요한 요인 중의 하나는 치아의 색상이다. 지르코니아는 디자인, 밀링, 착색, 건조, 소결과정을 거치는데, 이때의 지르코니아 착색제의 건조 정도가 색조에 어떠한 영향을 미치는지 알아보고자 한다. 실험을 위해 캐드캠을 이용하여 지르코니아 블록별(L block(LAZOR), Z block(Zircos-E block posterior), A block(AlphaZ))로 각 15개씩 총 45개의 원형 시편을 제작하였다. 그다음 지르코니아 시편을 화학적 착색제를 이용하여 미건조(0sec), 중간건조(10sec), 완전건조(10min)의 온도유지시간(Temperature dwelling time)을 부여하여 오븐에서 건조한 후 제조회사 지시대로 지르코니아 시편을 소결하였다. 분광광도계를 이용하여 색조를 측정하였다. 치과용 지르코니아 시편의 건조유지시간에 따라 색조의 변화를 비교 분석하기 위해 One-way ANOVA를 시행하고, 사후검정으로 Tukey test를 실시하였다. 지르코니아 $L^*$값은 L, A 시편과 $a^*$값은 A 시편, $b^*$값은 Z 시편의 건조 정도에 따라 통계적으로 차이가 없으나 (p>0.05), $L^*$값은 Z 시편과 $a^*$값은 L, Z 시편, $b^*$값은 L, A 시편이 건조 정도에 따라 통계적으로 차이가 있었다(p<0.05). 결론적으로 착색제의 건조유지시간이 길수록 지르코니아 명도를 밝게 하고, 법랑질의 광학적 특성을 증가시킨다.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.326-332
• /
• 2005

Phase transformation effects on mechanical properties of $Ge_2Sb_2Te_5$, which is a promising candidate material for Phase Change Random Access Memory (PRAM), were studied. $Ge_2Sb_2Te_5$ thin films, which was thermally annealed with different conditions, were analyzed using XRD, AFM, 4-point probe method and reflectance measurement. As the temperature and the dwelling time increased, crystallity and grain size increased, which enhanced elastic modulus and hardness. Furthermore, N2 doping, which was used for better electrical properties, was proved to decrease elastic modulus and hardness of $Ge_2Sb_2Te_5$.