• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.223-228
• /
• 2011

The initial joint width design of the terminal joint between post-tensioned concrete pavement (PTCP) and jointed concrete pavement (JCP) was studied in this research. The joint width between PTCP and JCP directly affects noise and ride quality. If the initial joint width is very large, noise increases and ride quality decreases. If the initial joint width is very small, on the other hand, under high temperatures, PTCP slabs can blow up, or failures near the joint can occur due to excessive compressive stresses. The terminal joint width behavior between PTCP and JCP near Jumunjin at Donghae expressway under temperature changes was measured in August and November 2010 and the data was analyzed. From this study, the design methodology of the optimal initial terminal joint width was proposed.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.139-147
• /
• 2020

In this paper, design measure were proposed for the construction of terminal systems for airborne platforms, which are key element in the Joint Tactical Data Link System (JTDLS) complete system. The Korean perfect tactical data link (JTDLS) is a communication system to establish an independent tactical data link network and needs to develop a MIDS-LVT (Link-16) communication terminal for datalink. Once a Ground/Navy JTDLS terminal system is established around airborne platform, it will be possible to break away from reliance on NATO-based tactical data link joint operations and establish independent Korean surveillance reconnaissance real-time data sharing and tactical data link operations concepts. in this paper, the essential development elements of airborne platform mounting and operable JTDLS terminals are presented, and the concept of system design is proposed to embody them. Further, improved system performance was analyzed by applying the concepts of complex relative navigation system and Advanced TDMA protocol for the deployment of airborne tactical datalink networks.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.331-338
• /
• 2013

For this research, 27 out of 52 patients with chronic low back pain involving sacroiliac joint pain were classified into the experimental group to conduct pelvic exercise program and traditional physical therapies in parallel, and the remaining 25 ones were classified into the control group to only apply traditional physical therapies for 6 weeks. After that, their clinical samples were randomly extracted. Before the experiment, both of the experimental group and the control group had the Oswestry disability index test to see how big their pain was and their hip joint angles were analyzed during walking. After the post-test, finally, the results of the Oswestry disability index test and hip joint angles while walking before and after the experiment were compared between two groups to know the effect of pelvic stability exercise program. Within-group results and between-group results both displayed significantly reduced low back pain, and when comparing hip joint angles of the experimental group, there were differences between mid stance phase, terminal stance phase, pre swing phase and early swing phase of the right hip joint, and mid stance phase, terminal stance phase, pre swing phase and early swing phase of the left hip joint. In the control group, there were significant differences between mid stance phase, terminal stance phase and early swing phase of the right hip joint, and loading response phase, mid stance phase, terminal stance phase and pre swing phase of the left hip joint. as a result, pelvic stability exercise program is helpful to gait rhythm on stance phase and swing phase although effective to decrease Oswestry disability index including pain.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.305-311
• /
• 2019

In this study, we examined the proper spacing between the expansion joints according to the temperature load of the inter-modal terminal platform infrastructure to implement a new inter-modal automated freight transport system, which we intend to introduce in Korea. To review the proper expansion joint spacing of the terminal platforms, we set the maximum expansion joint spacing according to the regional temperature changes using the equation proposed by the Federal Construction Council (FCC) of the United States. Then, the maximum displacement value, which was calculated through the structural analysis program, and the limit of the horizontal displacement of the building structure were compared. The proper expansion joint spacing was selected as the slab length at which the maximum displacement of the structure, due to temperature changes, was below the horizontal displacement limit. Based on the application of maximum expansion joint spacing for each region calculated through the FCC's suggestion, the maximum displacement that could occur within the limit of the lateral displacement of the structure was determined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1591-1597
• /
• 2012

Adherend samples were made from unsaturated polyester and woven and mat glass fibers by the hand layup and vacuum methods. The mechanical properties of the adhesive, composite adherends, and terminal-joint and secondary-joint specimens were determined experimentally. Combinations of the experiment results and the bonding theory were used in this study. The maximum and average shear stresses were calculated based on the maximum tensile force and geometry parameters of the joint specimens. The results of the maximum and average shear stresses were compared and evaluated for six joints. The results showed that the grinding and grind/acetone joint had the highest strength among three types of terminal-joints. Similarly, the mat-mat and mat-woven joints had the highest strength among three types of secondary-joints with the same value. Conversely, no treatment and woven-woven bonding had very low strength. In each case, failure occurred always at two ends and then moved toward the middle area of the overlap length.

• Journal of the Korean Statistical Society
• /
• v.33 no.2
• /
• pp.245-254
• /
• 2004

This paper derives a distribution function of the terminal value and running maximum of two-dimensional Brownian motion {X($\tau$) = (X$_1$($\tau$), X$_2$ ($\tau$))', $\tau$ 〉0}. One random variable of the joint distribution is the terminal time value, X$_1$ (T). The other random variable is the maximum of the Brownian motion {X$_2$($\tau$), $\tau$〉} between time s and time t. With this distribution function, this paper also derives an explicit pricing formula for an outside barrier option whose monitoring period starts at an arbitrary date and ends at another arbitrary date before maturity.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.218-223
• /
• 2002

The void volume fraction of cables is one of the effective parameters to characterize the joints of superconducting magnet. Because electrical resistance and cooling stability in the CICC (Cable-in-Conduit Conductors) joint are governed by the void volume fraction, it should be controlled constantly in the termination of cable. The change of cross-section shape in the cable was fecund during the unidirectional compaction of terminal sleeve. The non-uniform thickness of the sleeve after compaction is expected because the loading is not taxi-symmetric, and the plastic flow is also not axi-symmetric. The CICC was compacted from 45% void volume fraction to 15% by using two-piece compaction jig, which could be pressed mini-directionally. Commercial code, ABAQUS, was used to analyze the plastic flow in the sleeve during the unidirectional compaction. The increment of radius of curvature of compaction jig could minimize the change of the deformed shape of cables. The calculated results were agreed with the experimental observations.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.15-16
• /
• 2015

According to 2014 fire statistical yearbook in the National Fire Data System, a main cause of fire is electrical fire except carelessness fire. Joint/contact badness is the one of the main cause of electrical fire. Furthermore, power relays which are used in electric panel board, motor control center and automation controller, are main element of automation system in the industry field. Overload, voltage unbalance and open-phase due to joint/contact badness of terminal make electric accidents or electrical fires. In order to prevent joint/contact badness of terminal, this paper proposes a sensing circuit of chattering, tracking, arc current, voltage unbalance and open-phase etc. Some experimental tests of the proposed apparatus confirm practicality and validity of the theoretical results.

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.65-65
• /
• 2001

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.66-76
• /
• 2018

Terminal 2 of Incheon in'tl airport had made a grand opening since January 2018. Terminal 2 is currently operated by mainly Korean airline in cooperation with such skyteam members as Delta airline, Air France and Royal Dutch KLM. It is expected another three skyteam member airlines join the separate operation at terminal 2 since this coming winter. It is believed very meaningful research to analyze how separate operation of Global alliance of airlines affects the global brand image of an organization. To find out such effect, researchers have made an empirical analysis of perception of airline staffs working at terminal 2. This paper has focused on how the staffs perceive airline service quality in the changed working environment and on how significantly their perception on service has an effect on airline's global brand image with such moderating variables as organizational efficacy and organizational trust. According to empirical analysis using structural equation modeling, it was proven the variable of responsiveness among perceived airline service qualities had a direct significant effect on formulating airline's global brand image associated with joint venture between Korean airline and Delta airline. However, the other variables had a indirect significant effect on global brand image with moderating effects.