• Journal of Korean Society for Atmospheric Environment
• /
• v.6 no.2
• /
• pp.125-134
• /
• 1990

The purpose of this study is to assess the performance of Short-term atmospheric dispersion models --- ISCST, MPTER, VALLEY --- with terrain adjustment. The models are evaluated through correlation analysis, paired analysis and log-normal culmulative analysis between the measured and predicted concentrations in Samcheonpo area. The correlation coefficients between the measured and predicted concentrations turn out to be higher with terrain adjustment than those without terrain adjustment. In paired analysis, the mean differences and average absolute gross errors of concentrations do not change significantly with terrain adjustment. But the variances of the residuals become much smaller when the terrain is adjusted. Through the log-normal cumulative analysis, it is found that the terrain adjustment improve the prediction performance of MPTER and VALLEY, but do not affect significantly that of ISCST. Overall, it is concluded that the performance of short term atmospheric dispersion models improve when the terrain is considered in computation, especially in MPTER and VALLEY.

• Atmosphere
• /
• v.16 no.4
• /
• pp.359-370
• /
• 2006

Terrain height variance spectra for the Korean mountain region are calculated in order to determine an adequate grid size required to resolve terrain forcing on mesoscale model simulation. One-dimensional spectral analysis is applied to specifically the central-eastern part of the Korean mountain region, where topographical-scale forcing has an important effect on mesoscale atmospheric flow. It is found that the terrain height variance spectra in this mountain region has a wavelength dependence with the power law exponents of 1.5 at the wavelength near 30 km, but this dependence is steeply changed to 2.5 at the wavelength less than 30 km. For the adequate horizontal grid size selection on mesoscale simulation two-dimensional terrain height spectral analysis is also performed. There is no directionality within 50% of spectral energy region, so one-dimensional spectral analysis can be reasonably applied to the Korea Peninsula. According to the spectral analysis of terrain height variance, the finer grid size which is higher than 6 km is required to resolve a 90% of terrain variance in this region. Numerical simulation using WRF (Weather Research and Forecasting Model) was performed to evaluate the effect of different terrain resolution in accordance with the result of spectral analysis. The simulated results were quantitatively compared to observations and there was a significant improvement in the wind prediction across the mountain region as the grid space decreased from 18 km to 2 km. The results will provide useful guidance of grid size selection on mesoscale topographical simulation over the Korean mountain region.

• Journal of Korean Society for Geospatial Information Science
• /
• v.2 no.1 s.3
• /
• pp.107-119
• /
• 1994

Modern war is called as information war. So an Information Systems which operate hitech-weapon is evaluated important by the ARMY. As terrain analysis techniques we an essential element, computer-based terrain analysis techniques for the army are developed. This paper studies the method of tactical terrain analysis data base construction and presents cross-country mobility after analysis officer analysis overlayed terrain data. Also, Terrain information data base construction method is presented through this analysis, which planned a suitable plan of operations in order to mission accomplishment in normal times.

• Korean Journal of Remote Sensing
• /
• v.10 no.2
• /
• pp.121-132
• /
• 1994

A GIS based tactical terrain analysis system named ATTAS(Army Tactical Terrain Analysis Software) has been designed and implemented to support the field commanders for enhancing the capabiliy of their unit and efficiency of weapon system. This system is designed to provide computer graphics environment in which the analyst can interactively operate the entire analyzing process such as selecting the area of interest, performing analysis functions, simulating required battlefield operation and display the results. This system can be divided into three major sections; the terrain analysis modules, utilites, and graphic editor. The terrain analysis module inclused surface analysis, line of sight analysis, enemy disposition, 3D display, radar coverage, logistic route analysis, shortest path analysis, atmospheric phenomena prediction, automated IPB (Inteligence preparation of Battlefield), and other applied analysis. A combination of 2D and 3D computer graphics techniques using the X-window system with OSF/Motif in UNIX workstation was adopted as the user interface. The integration technique of remotely sensed images and GIS data such as precision registration, overlay, and on-line editing was developed and implemented. An efficient image and GIS data management technique was also developed and implemented using Oracle Database Management System.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.1
• /
• pp.80-87
• /
• 2009

The purpose of this study is to analyze the MAUP's effect in visibility analysis using GIS. MAUP normally occurs in the process in terrain spatial analysis including visibility analysis. There are two different types of grid data(based on digital map and Digital Terrain Elevation Data) and 10 different types of areal units are made for modeling, such as $5m{\times}5m,\;10m{\times}10m,\;15m{\times}15m,\;20m{\times}20m,\;25m{\times}25m,\;30m{\times}30m,\;35m{\times}35m,\;40m{\times}40m,\;45m{\times}45m,\;50m{\times}50$. By analyzing the result, it was possible to observe varying viewshed areas according to different grid cell sizes and the viewshed area did not varied linearly as expected. From a general point of view, smaller unit data map out the real world in more detail, but the results of modeling do not always reach a good conclusion when data are used in modeling for terrain analysis because of the MAUP' effect. The grid cell sizes of 30m or less seems to be adequate for visibility analysis, including terrain analysis considering vegetation heights.

• Journal of the military operations research society of Korea
• /
• v.17 no.2
• /
• pp.31-43
• /
• 1991

The fire effectiveness and the operationability of the ground weapon system (such as tank, armored vehicle, howitzer, MLRS, ${\cdots}$), whose operations are usually happened on the ground, are dependent not only on their performances but also on the terrain environments. Especially, the artillery weapons systems' effectiveness is largely varied, because their maneuverability (such as translation, occupation of their sites) and the fire effectiveness are very dependent on the terrain. In this paper, presented are the methods how to analyze the terrain using the digital terrain data. And a software (which are implemented on the IBM PC compatible personal computer) is developed for the analysis of the terrain using the various method of computer Aided Geometric Design and Modeling. The S/W is expected to be very useful for the evaluation of the artillery weapon systems and for the commanders' decision making.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.35-41
• /
• 1998

A watershed terrain factor is known to the very important in studies of a stream and a watershed. We have obtained the terrain factor in map directly or we have generated it in a digitalized map. In this study, DTED(Digital Terrain Elevation Data) offering in DMA(Defense Mapping Agency) was used to create a stream and a watershed and to extract the terrain factor. As comparison of the factors gererated in digitalized map the terrain factors extracted in DTED, DTED could be used to extract a terrain factor for a watershed management.

• The Journal of Korea Robotics Society
• /
• v.8 no.2
• /
• pp.116-128
• /
• 2013

This paper focuses on development of a testbed for analysis of robot-terrain interaction on rough terrain and also, through one wheel driving experiments using this testbed, prediction of maximum velocity and acceleration of UGV. Firstly, from the review regarding previous researches for terrain modeling, the main variables for measurement are determined. A testbed is developed to measure main variables related to robot-terrain interaction. Experiments are performed on three kinds of rough terrains (grass, gravel, and sand) and traction-slip curves are obtained using the data of the drawbar pull and slip ratio. Traction-slip curves are used to predict driving performance of UGV on rough terrain. Maximum velocity and acceleration of UGVs are predicted by the simple kinematics and dynamics model of two kinds of 4-wheel mobile robots. And also, driving efficiency of UGVs is predicted to reduce energy consumption while traversing rough terrains.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.127-136
• /
• 2006

Shaded relief is used in the analysis of digital terrain model, but accurate shadow zone has not been affirmed on account of idea only shadow of terrain that would be in shadow are shaded. This study is to analyze each display difference of a digital terrain model by grasping the shadow characteristics of terrain and comparing shaded relief function used terrain display of GIS with a rendering technique. After terrain with road in subject area is selected and created to digital terrain model of TIN, shaded relief and rendering according to altitude and azimuth of the sun at 9:00 am and 3:00 pm is applied. As the results, only backward portions of the terrain that is in shadow from the sunlight are shaded in case of shaded relief. The rendering created the shadow, which is cast by terrain features. By these mutual comparison, this study represented data for understanding of shaded relief. And it is expected that the rendering method could be used to analyze sunshine influence.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.61-67
• /
• 1999

A watershed terrain factor is known to the very important in studies of a stream and a watershed. We have obtained the terrain factor in map directly or we have generated it in a digitalized map. In this study, DTED (Digital Terrain Elevation Data) offering in DMA(Defense Mapping Agency) was used to create a stream and a watershed and to extract the terrain factor. As comparison of the terrain factors gererated in digitalized map with the terrain factors extracted in DTED, DTED could be used to extract a terrain factor for a watershed management.