• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2004

The systematic testing is frequently regretted in recent web applications because of time and cost pressure. Moreover developers have difficulties with applying the traditional testing techniques to testing web application. The approach of creating test cases for a web application from a sequence model is proposed for the rapid and efficient testing. Test cases for web application are extracted from call messages (including self-call messages) of UML (Unified Modeling Language) sequence diagram. A test case consists of messages, script functions, or server pages and additional values. Moreover a simple testing tool for web application is proposed. A URL for testing web application is created and executed by this testing tool. The URL consists of server page address and additional values. This test tool is made using Microsoft Visual Basic. The efficiency of proposed method and tool has been shown using a practical case study which reflects the development project of the web application for supporting member management.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.473-474
• /
• 2020

2020년 상반기는 코로나19로 촉발된 상황은 온라인 강의 도입 등 교육환경에도 영향을 미치고 있다. 게임제작 관련 교육과정에서 게임제작 프로젝트를 진행할 때 QA는 게임의 개발이 진행되는 단계에 맞춰 리뷰와 테스트 케이스 작성, 테스트 실행, 이슈 보고를 진행한다. QA의 핵심 업무 중 하나가 테스트 케이스를 작성하는 것이다. 이번과 같이 비대면이 강제되는 상황에서 팀원들과 협업을 하기 위해서는 테스트 케이스 관리 도구를 활용하여 효율적으로 QA를 수행하는 방안이 필요하다.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.397-401
• /
• 2015

In this study, analysed the characteristics of power drop and surface damage in solar cell through high temperature and humidity test in the 3 case of EVA(ethylene vinyl acetate) and 2 case ribbon thickness. The solar cells were tested during the 500hr in $85^{\circ}C$ temperature and 85% relative humidity conditions, that excerpted standard of PV Module(KS C IEC-61215). Through the EL(Electroluminescence) shots, specimen's surface have partialy damaged. Before and after high humidity and high temperature test, ribbon thickness $200{\mu}m$ EVA1 case power drop rate was 8.463%, EVA2 case was 6.667%, EVA3 case was 6.373%. In the ribbon thickness $250{\mu}m$ EVA1 case power drop rate was 6.521%, EVA2 case was 8.517%, EVA3 case was 6.019%. EVA3 case was the lowest power and FF(fill factor) drop rate at the 2 case of ribbon thickness, because EVA3 is laerger than EVA1 and EVA2 in thickness, elongation and tensile strength.

• Journal of Information Technology Applications and Management
• /
• v.27 no.6
• /
• pp.101-116
• /
• 2020

This study attempts to derive critical success factors and prioritize activities for implementing the automation of software test. Software testing proceeds in five steps of test plan, test case design, test scripting & test environment setup, test execution & evaluation, and test closure. From the literature, twenty influence factors in the five steps were identified. Focus Group Interviews with ten experts in software testing selected fourteen factors on the basis of importance and feasibility. Some factors were further divided to clarify their meanings and the number of influence factors finally became twenty one. A survey on the influence factors was conducted with 75 IT professionals. An importance-feasibility analysis was applied to the survey responses and classified the influence factors into four groups of essential factors, critical factors, low priority factors, and minimal factors. Essential factors include objectives for test automation, strategies for test automation, test automation training, test automation education, setting up test automation environment, setting up test environment, test automation tool selection. Critical factors include management's continued support, management's continued interest, role of automation engineers, and skills of automation engineers. This result suggests that a lot of efforts should be put into SW test plan for the successful SW test automation and SW automation should proceed in consideration with the priorities and resource consumption.

• Journal of Korean Society for Quality Management
• /
• v.40 no.2
• /
• pp.117-125
• /
• 2012

For the highly reliable products, an accelerated degradation test (ADT) is a useful tool which has been employed in industry to obtain reliability-related information within an affordable amount of time and cost. In an ADT, as all other reliability tests, it is important to carefully design the ADT beforehand to obtain estimates of the quantities of interest as precisely as possible. In this paper, optimal ADTs are developed assuming that the constant-stress loading method is employed and the degradation characteristic follows a Wiener process. Under the constraint that the total cost does not exceed a pre-specified budget, the stress levels, the number of test units allocated to each stress level and the number of measurement (termination time) are determined such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

• Food Science and Industry
• /
• v.52 no.1
• /
• pp.20-31
• /
• 2019

Sensory perception of food/beverage products is one of the most important quality factors to determine consumer acceptability and thus sensory discrimination methodology has been a vital tool for quality management. Signal detection theory(SDT) and Thurstonian modeling provide the most advanced psychometric approach to modeling various discrimination methods. In these theories, perceptual and cognitive decisional factors are considered so that, a fundamental measure of sensory difference (d') can be computed, independent of test methods used. In this paper, sensory discrimination analysis based on SDT and Thurstonian modeling is introduced for more accurate and systematic applications of sensory and hedonic quality management in industry. Ways to realize the statistical power and relative sensitivity of sensory discrimination methods theorized in SDT and Thurstonian modeling in practice, are also discussed by using a case study of the Nongshim quality management program for drinking water in which SDT A-Not A test methodology was further optimized.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.2
• /
• pp.1-12
• /
• 2013

Research indicates that good front-end planning (FEP) results in the achievement of higher levels of project performance. By facilitating collaboration among stakeholders in diverse locations with the use of workflow-enabled processes, such pressures can be reduced, and the overall process and results of FEP can be improved. With these goals, a front-end planning tool (FEPT) has been developed as support for owners and major contractors who are engaged in front-end planning. This paper presents the new FEPT and describes how it has been used for construction megaprojects in the nuclear power, oil and gas, and mining industries. The paper begins with the definitions related to and an explanation of the general process for implementing and applying the FEPT and then describes and analyzes how the FEPT was applied in case study projects in order to test its validity. The results indicate that the FEPT increases the efficiency and effectiveness of front-end planning for the megaprojects studied and that it has the potential to produce similar results for other megaprojects.

• Journal of Korean Society for Quality Management
• /
• v.24 no.4
• /
• pp.190-206
• /
• 1996

In case measurements are made on units of production in time order, it is reasonable to expect that the measurement errors will sometimes be first order autocorrelated, and a technique to test such autocorrelation is required to give good control of the productive process. Tool-wear process provide an example for which regression model can sometimes be useful in modeling and controlling the process. For the control of such process, we present a simple method for testing first order autocorrelation in regression errors. The method is based on Bayesian test method via Bayes factor and derived by observing that in general, a Bayes factor can be written as the product of a quantity called the Savage-Dickey density ratio and a correction factor ; both terms are easily estimated from Gibbs sampling technique. Performance of the method is examined by means of Monte Carlo simulation. It is noted that the test not only achieves satisfactory power but eliminates the inconvenience occurred in using the well-known Durbin-Watson test.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.1
• /
• pp.75-81
• /
• 2002

In this paper, data rate of VDSL system was analyzed in noise and crosstalk environment. For this paper, Matlab tool was used to analyze the performance of VDSL system. Various "VDSL Test Loop" are used which is suggested by ANSI DSL Standard group T1E1.4. Many parameters, "Noise Model A", "Noise Model F", duplex method VDSL-998 which is suggested FDD plan by ANSI was used. The most of conditions for simulation are followed to the ANSI Standard "Spectrum management" Lots of data have been obtained according to the different conditions of the test loops. The result shows that the data rate of VDSL system is decreased due to the other DSL signals in the same cable bundle. And also there was more reduced data rate in case of Noise Model F than that of Noise Model A.