• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.64-85
• /
• 2004

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.255-260
• /
• 2010

The Ministry of Environment simultaneously revised testing methods and emission standards of adhesives product on the "Law of indoor air quality management" for the effective management of the building materials releasing pollutants in great quantities. Accordingly, it is impossible to compare original standards with revised standards directly. The influences of each factor of the revised testing methods of adhesive product on the emission rate of pollutants are reviewed through comparing with the original testing method. Through this study, revised pollutant emission control standards were assessed. With the result that it is found that emission rate of adhesives product is weakened two and half times by changing test period and the emission rate resulting from changing drying time has little difference. As a result of comparing TVOC emission standards with the original testing method considering the modification of testing methods, it is found that the emission standard through this revision is strengthened about 2.1 times more than that of present testing method.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.74-81
• /
• 2010

Ship STEP is the international standard for the exchange of ship modeling data between heterogeneous systems. It is expected that STEP AP218 can be used for seamless data exchange between various CAD/CAM/CAE systems used in the shipbuilding design process. Although the conformance assessment for standards would maximize the performance and confidence about data exchanges, most research has been directed toward interoperability testing. ISO SC4/TC184 only provides the method for conformance testing, and it can be used with test cases on application protocols. Even though standards have been defined for conformance assessment and testing, there is no organization or association. CAD vendors have focused on interoperability testing for evaluation of the performance of their systems. In this paper, the conformance testing criteria for AP218 have been developed with abstract test cases of ship structures. The requested STEP translator was also reviewed with a developed item pool of testing criteria. The criteria methodology would be a guideline for the development of translators and interfaces. The item pool method of testing criteria for conformance assessment would increase performance and efficiency of data translators for Ship STEP and other standards.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1443_1444
• /
• 2009

A study on the environmental tests for auxiliary and control circuits of high voltage switchgears, especially testing condition and requirements, according to the relevant international standards has been briefly reviewed in this paper. As the highest supply voltage of electric power systems have been progressed, testing techniques and testing standards such IEC codes improved and revised keeping step with it. Especially IEC 62271 series, which are applicable to the HV-class switchgears and controlgears have been revised in 2008 newly. In this paper, the special consideration and background information of environmental testing condition with mechanical operating performance, e.g. operation in a higher and lower ambient temperature, for the auxiliary and control circuits of switchgears and controlgears and considerable investigation to the related international standards have been provided. Examples of testing performed were showed and analysis of their test results have been described.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.3 no.1
• /
• pp.5-11
• /
• 1983

The impulse response function are studied using time domain Born approximation in two cases; firstly when the material parameters of a flaw are constant, secondly when the parameters are varying with positions. From the impulse response functions, characteristics can be learned about a flaw with high symmetry.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.2 no.2
• /
• pp.52-55
• /
• 1983

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.56-62
• /
• 2005

Because of the wide plane and the curved field of CRT rear projection high definition television, its MTF(modulation transfer function) can't be easily measured by the usual forward testing method. Then we propose a backward testing method for the MTF so that the object plane and the image analyzer of forward testing are located at positions opposite each other. We prefer to use the backward testing method because the forward testing method has poor accuracy caused by very small numerical aperture, low spatial resolutions, and long depth of focus. We found that the backward testing method was very easy to align and had high repeatability. We confirmed the confidence of results obtained by the backward testing method in comparison with designed results.

• Journal of Applied Reliability
• /
• v.6 no.1
• /
• pp.27-36
• /
• 2006

It is increasingly important to ensure that a given vibration test specification of a particular machinery component is appropriately established by considering its real environmental conditions. Vibration test standards for electrical components are well documented, for example in an IEC 60068 series, while standards for machinery components are rarely found except a few military standards. Thus many vibration tests are performed based on the military standards. However, a test based on these military standards often results in over-testing, and under-testing in some cases due to the different environmental conditions. Also, these standards require an appropriate tailoring that may not be easily accomplished. In this paper, various international and military standards are compared and investigated to obtain test specifications relevant for machinery components. Also appropriate tailoring methods are demonstrated through a case study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.04a
• /
• pp.20-23
• /
• 1990

In order to evaluate the difference of testing results in the standards on the compressive strength of various countries, we have compared the testing results of the compressive and flexural strength, one of the most important properties of cement, obtained on the various standards(KS, JIS, BS, ASTM) and the statistical method was used to evaluate the results.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1149-1154
• /
• 2010

Liquid chromatography/mass spectrometry using isotope dilution method has been established as a primary method for the measurement of cortisol in human serum. Verification of this method was accomplished by the participation in Consultative Committee for Amount of Substance-Metrology in Chemistry (CCQM) pilot study. Two levels of cortisol certified reference materials were prepared and certified by the established method. They were used as sample materials for the proficiency testing. The expanded uncertainty in the measurement of cortisol in human serum was approximately 1.2% at 95% confidence level. The results of the proficiency testing showed a good precision among the participants, but some bias to the certified values. This means that commercial field laboratories should keep traceability chain to SI unit through available reference measurement procedures and/or available reference materials.