• 한국추진공학회지
• /
• 제23권6호
• /
• pp.59-71
• /
• 2019

고체 로켓용 삭마성 내열 시스템의 수치 해석은 1960년대부터 다양한 In-house 코드로 수행되어 왔으나 Fluent, Marc, ABAQUS 등 상용코드에 서브루틴, UDF 등을 추가하여 해석 범위를 확장함으로써 상용코드의 활용 범위가 넓어지고 있다. 또한 예전에는 내열 시스템의 유동, 열반응과 구조해석을 각각 수행하였으나 근래에는 이들을 서로 연동하여 해석하는 연구들이 진행되고 있다. 본 논문에서는 내열재의 열반응 특성, 열반응 해석용 In-house 코드 그리고 상용코드로 내열 시스템의 유동, 열반응과 구조 해석을 수행한 연구동향을 고찰하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.872-875
• /
• 2004

In this paper, thermal response analysis of a temperature controlled three-axis accelerometer for high temperature environments with integrated micro-heaters and temperature sensors is investigated with finite element method (FEM) program, ANSYS and infrared thermal measurement systems. And availability to application fields from a viewpoint about short thermal response time is discussed. In this paper, the time of three-axis accelerometer for high temperatures becoming $300^{\circ}C$ by integrated micro-heaters and temperature sensors to reduce thermal drift characteristics was analyzed as a thermal response time of this device. The simulated thermal response time (time until SOI piezoresistors actually becomes $300^{\circ}C$) of three-axis accelerometer for high temperatures with ANSYS is about 0.6s, and measured result with infrared temperature measurement systems is about 0.64s. Experimental results using infrared thermal measurement systems agreed well with these theoretical results.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.37-44
• /
• 2014

A detailed satellite panel thermal model composed of more than thousands nodes can not be directly integrated into a spacecraft thermal model due to its node size and the limitation of commercial satellite thermal analysis programs. For the integration of the panel into the satellite thermal model, a reduced thermal model having proper accuracy is required. A thermal model reduction method was developed and validated by using a geostationary satellite panel. The temperature differences of main components between the detailed and the reduced thermal model were less than $1^{\circ}C$ in steady state analysis. Also, the dynamic responses of the detailed and the reduced thermal model show very similar trends. Thus, the developed reduction method can be applicable to actual satellite thermal design and analysis with resonable accuracy and convenience.

• 설비공학논문집
• /
• 제12권4호
• /
• pp.404-413
• /
• 2000

Environmental chamber (EC) is an experimental facility used to analyze the characteristics of thermal response of testing objects by the artificial control of weather conditions. The EC in KIER can simulate the weather conditions by the control of temperature, humidity, and solar radiation. A two-storied testing building is located inside of EC. For the exact thermal response analysis of testing building, monthly or yearly scheduled operations are necessary. Although this long term operation gives the exact experimental data, it requires a high operational cost, long duration, and lots of manpower. Therefore it is necessary to perform the shortened experiments without sacrificing the validity of the obtained results. Since the characteristics of thermal response from the shortened experiments are different from the full time results, the analytical method to analyze the thermal response from the shortened experiments to estimate a full times results is developed in this study. The thermal response of testing building is performed using commercial software TRNSYS.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권3호
• /
• pp.18-26
• /
• 2001

Environmental chamber (EC) is an experimental facility used to analyze the characteristics of thermal response of testing objects by the artificial control of weather conditions. The EC in KIFR can simulate the weather conditions by the control of temperature, humidity, and solar radiation. A two-storied testing building is located inside EC. For the exact thermal response analysis of testing building, monthly or yearly scheduled operations are necessary. Although this long term operation gives the exact experimental data, it requires a high operational cost, long duration, and lots of manpower. Therefore it is necessary to perform the shortened experiments without sacrificing the validity of the obtained results. Since the characteristics of thermal response from the shortened experiments are different from the full time results, the analytical method to analyze the thermal response from the shortened experiments to estimate a full times results is developed in this study The thermal response of testing building is performed using commercial software TRNSYS.

• Nuclear Engineering and Technology
• /
• 제18권1호
• /
• pp.38-47
• /
• 1986

경수로심의 열 여유도를 분석하기 위하여 반응표면 및 Monte Carlo 방법을 이용하는 통계적 분석 방법이 제시되었다. 통계적인 열 여유도 분석 방법은 입력변수들의 불확실도를 확률론적으로 처리함으로써 열 여유도의 최적 평가를 수행한다. 이 방법은 원자력 1호기 정상상태의 원자로심 분석에 응용되었으며 또한 종래의 결정론적 방법 및 웨스팅하우스의 개선된 열설계 방법과도 비교되었다. 본 연구를 통하여 반응표면 분석 방법은 통계적인 열 여유도 분석에 유용함을 알 수 있었으며, 이 방법을 통한 열 여유도의 증가도 확인되었다.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.306-314
• /
• 2012

Several numerical or analytical models have been proposed to analyze the thermal response of vertical ground heat exchangers (GHEX). However, most models are valid only after several hours of operation since they neglect the heat capacity of the borehole. Recently, the short time response of the GHEX became important in system simulation to improve efficiency. In this paper, a simple new method to evaluate the short time response of the GHEX by using an analogy model of electric circuit transient analysis was presented. The new transient heat exchanger model adopting the concept of thermal capacitance of the borehole as well as the steady-state thermal resistance showed the transient thermal resistance of the borehole. The model was validated by in-situ thermal response test and then compared with the DST model of the TRNSYS program.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.645-659
• /
• 2015

This research investigates the thermoelastic transient behavior of a thermally loaded slab made of a thermal diode-like material which has two directional thermal conductivity values (low and high). Finite difference analysis is used to obtain the elastic response of the slab based on the temperature solutions. It is found that the rate of heat transfer through the thickness of the slab decreases with reducing the ratio between the low and high thermal conductivity values (R). In addition, reducing R makes the slab less responsive to the thermal load when heated from the direction associated with the low thermal conductivity value.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1063-1068
• /
• 2004

A numerical study is performed to predict the effect of operating conditions on the thermal response of electronic assemblies during infrared reflow soldering. The multimode heat transfer within the reflow oven as well as within the electronic assembly is simulated, and the predictions illustrate the detailed thermal responses. Parametric study is performed to determine the thermal response of electronic assemblies to various conditions such as conveyor speed, exhaust velocity, and component emissivity. The predictions of the detailed electronic assembly thermal response can be used in selecting the oven operating conditions to ensure proper soldering and minimization of thermally-induced electronic assembly stresses.

• 터널과지하공간
• /
• 제4권2호
• /
• pp.102-118
• /
• 1994

Thermomechanical analysis is conducted on the radioactive repository in deep rock mass considering the in-situ stress, excavation and thermal loading of a radioactive waste. Thermomechanical properties of a discontinuous rock mass are estimated by a theoretical method so called sequential analysis. Using the estimated properties as input for finite element analysis, the influence on temperature distribution and thermal stress is analyzed within the scope of 2-dimensional steady state and transient heat transfer and coupled thermal elastic plastic behaviour. Granitic rock mass is taken for this analysis. The analysis is done for two different rock mass conditions, i.e. continuous-homogeneous and highly jointed conditions, for the purpose of comparison. In the case of steady state, the extent of disturbed zone around the storage tunnel due to the heat production of the spent-fuel canister varies depending on the thermomechanical properties of the rock mass. In the case of transient analyses, the response of the jointed rock mass to the thermal loading after radioactive waste disposal varies significantly with time, resulting in dramatic changes in the both size and location of disturbed zone.