• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.79-87
• /
• 2008

Recently, a new seismic probe, called "MudFork", has been developed and can be utilized for accurate and easy measurements of shear wave velocities of cohesive soils. To expand its use to estimate undrained shear strength and density, a preliminary investigation to correlate these properties with shear wave velocity was attempted. Cone penetration tests and a seismic test, using MudFork, were performed at a silty soil site near Incheon, Korea. Also, undisturbed samples were obtained using thin-wall tube samplers, and the shear wave velocities and undrained shear strengths of the samples were measured in the laboratory. A simple linear relationship between shear strength and shear wave velocity was obtained, and a tentative relationship between density and shear wave velocity was also defined.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.71-79
• /
• 2023

Air ingress incidents are major safety accidents in very-high-temperature reactors (VHTRs). Air containing a high volume fraction of oxygen may cause severe oxidation of core components at the VHTR, especially for the significantly thin alloy tube wall in the intermediate heat exchanger (IHE). The research objects of this study are Inconel 617 and Incoloy 800H, two candidate alloys for IHE in VHTR. The air ingress accident scenario is simulated with high-temperature air flow at 950 ℃. A continuous oxide scale was formed on the surfaces of both the alloys after the experiment. Because the oxide scale of Inconel 617 has a loose structure, whereas that of Incoloy 800H is denser, Inconel 617 exhibited significantly more severe internal oxidation than Incoloy 800H. Further, Inconel 617 showed a significant decrease in ultimate tensile strength and plasticity after aging for 200 h, whereas Incoloy 800H maintained its tensile properties satisfactorily. Through control experiment under vacuum, we preliminarily concluded that serious internal oxidation is the primary reason for the decline in the tensile properties of Inconel 617.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.328-336
• /
• 1997

The CdSe thin films were grown on the Si(100) wafers by a hot wall epitaxy method (HWE). The source and substrate temperature are $600^{\circ}C$ and $430^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. From Hall data, the mobility was increased in the temperature range 30K to 150K by impurity scattering and decreased in the temperature range 150k to 293k by the lattice scattering. In order to explore the applicability as a photoconductive cell, we measured the sensitivity(${\gamma}$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.39{\times}10^{7}$, the MAPD of 335mW, and the rise and decay time of 10ms and 9.5ms, respectively.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.40-52
• /
• 2023

The basic purpose of building material called tiles is waterproofing and damp proofing, and they were restricted to use on important buildings to symbolize authority. This is especially true during the Three Kingdoms period, although unearthed examples are rare. Most of these tiles are found in ruins in the Silla and Baekje regions. Tiles were excavated from the Buwon-dong ruins that show the oldest manufacturing technique in the Gaya region to date, and tiles from the early Three Kingdoms period were recently excavated from the Gimhae Bonghwang-dong ruins, which is presumed to be the site of the royal palace of Geumgwan Gaya. These are important materials that show the appearance of tiles from the early days of Gimhae, the ancient capital of Geumgwan Gaya. The tiles excavated from the Bonghwang-dong ruins are reddish-yellow because a small amount of sand was mixed in the tile material and baked at a low temperature. The tiles are thin, no traces of fabric were identified, but traces of clay bands were identified. Tapping tool marks and traces of an anvil used in pottery production are clearly observed on the inside and outside, indicating that the tiles were made in the same way as earthenware manufacturing methods. If this is connected to the genealogy of the potters who made Gaya earthenware, it is estimated that tiles and earthenware were produced together as in the Songrim-ri ruins in Bulo-dong, Incheon, Songgok-dong ruins in Gyeongju, and Mulcheon-ri ruins. To date, tiles excavated from the Gimhae area have been identified only in places believed to be the Geumgwan Gaya City Wall (Royal Palace) in the Gimhae Basin. Considering what has been recorded so far and the geographical scenery, the Bonghwang-dong remains are the only city wall candidate site, and this is clearly revealed through the existence of the excavated tiles, which proves this. Considering that a small number of tiles were excavated during this time, it is estimated that the role of tiles as a luxury product with a symbolic meaning was greater than that of roofing materials, and there were strict restrictions and controls on its use.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.190-195
• /
• 1999

The crystallographic and magnetic properties of the system of $Fe_{1-x}Co_x$(x=0.2 and 0.4) prepared by microwave arc-melting with the maximum power of 3.5 kW and a iron-foil with thickness of 25 ${\mu}{\textrm}{m}$ have been studied by the methods of X-ray diffraction and the measurement of the magnetic hysteresis using the vibrating sample magnetometer at room temperature. The samples were prepared in three different ways: First, pellet form pressed under the pressure of 9,000 N/$\textrm{cm}^2$. Second, the sheet cold rolled. Third, thin sheet treated with the temperature of 90$0^{\circ}C$. The X-ray diffraction pattern of the sample prepared by the first method shows that the crystal structure of the sample is bcc as same as that of Fe with a good uniformity. The iron-foil has the coercivity of 43 Oe and the initial slope of magnetization of 0.328 emu/gOe. The coervicity and magnetization of the sample prepared by the second method increased as the Co content increased. But the initial slop of the magnetization decreased as the Co content increased. This means that the displacement of domain wall is suppressed by the increases of coercivity as the Co content increased. The saturation magnetization of the samples made by the third method increased. On the other hand, the coercivity of these samples decreased. The increase of saturation magnetization of the samples seems to be related to the changes in X-ray intensity after heat treatment. Also some magnetic parameters of the samples were calculated by using a simple model and compared with other values.

• Journal of Embryo Transfer
• /
• v.24 no.3
• /
• pp.151-157
• /
• 2009

Serial ultrasonography was conducted on Miniature Schnauzer bitches, on purpose to observe the ultrasonographic appearance of normal ovaries and ovarian structures during the estrous cycle. The size of ovaries was increased from $76.8{\pm}7.5mm^2(Mean{\pm}S.D)$ on Day-12 (Day-0=ovulation day) to $114.4{\pm}5.5mm^2$ on Day-8 and there was no significantly different between both ovaries. The ovaries were recognized by its proximity to the caudal renal pole and appeared moderately echogenic oval shape with a smooth contour. The size of follicles was increased from $8.1{\pm}4.5mm^2$ on Day-12 to $114.4{\pm}5.5mm^2$ on Day-0 and there was no significantly different between both ovaries. The number of follicles was increased from $2.8{\pm}0.7$ on Day-12 to $1.1{\pm}0.1$ on Day-0 and there was no significantly different between both ovaries. The follicles were small anechoic fluid-filled structures in early of proestrus, more increased, and indistinguished from each follicles in late of proestrus. The size of corpora lutea was increased from $19.3{\pm}2.1mm^2$ on Day-0 to $26.4{\pm}8.1mm^2$ on Day-8 and there was no significantly different between both ovaries. The number of corpora lutea was increased from $1.4{\pm}0.6$ on Day-0 to $2.9{\pm}0.4$ on Day-38 and there was no significantly different between both ovaries. The corpora lutea were small anechoic cavity and thin hyperechoic wall in early of diestrus, became more hyperechoic, and increased homogenous structures. The results of this study would be useful for differential diagnosis between normal and abnormal structures of ovaries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.347-353
• /
• 2018

In this paper, we studied a design method for a band-pass waveguide filter with a modified H-type resonant iris (RI) placed in a thin transverse wall of a rectangular waveguide. The horizontal straight gap at the center of a conventional H-shaped iris is modified to a U-shaped one to increase the equivalent capacitance, and the equivalent inductance is improved by changing the vertical two straight slots into C-shaped ones. From some simulation results for the frequency response of the proposed RI, it was observed that the proposed iris was advantageous for reducing its size and having better cutoff, compared to typical H-shaped one. Equivalent inductance, capacitance, and quality factor of the proposed RI were extracted to analyze its performance. A third-order band pass filter using the proposed modified H-shaped iris was designed and, it was observed that the filter operated in the frequency range of 9.18-9.84 GHz with its insertion loss of 0.3 dB and return loss of 14 dB.

• Parasites, Hosts and Diseases
• /
• v.27 no.4
• /
• pp.253-260
• /
• 1989

Metacercariae of the genus Stictodora encysted in the head tissue of Acanthogobius navimanus (the gobies) caught at Sachun-gun, Kyongnam Province, were identified to be Stictodora Zari Yamaguti, 1939 (Trematoda: Heterophyidae), a new parasite fauna in Korea. The metacercariae were 0.39∼,0.43 mm by 0.32∼0.35 mm in size, long elliptical, and with a thin and transparent cyst wall. Total 200 metacercariae were collected from 50 gobies. In order to obtain adult worms two kittens and a Puppy were infected each with 34∼100 metacercariae, and total 33 adults were recovered between the day 4 and day 8 post-infection. The S. sari adults measured 0.95∼1.18 mm long and 0.26∼0.32 mm wide and the eggs in uteri 0.028∼0.033 mm by 0.017∼0.020 mm. The most characteristic morphological feature of these flukes was the presence of a gonotyl and gonotyl spines arranged in two groups; densely crowded group of 30~40 spines and linearly-arranged one of 30∼40 spines, together of which made a comma(or reversed comma) shape along the lateral margin of the gonotyl. It has been proved by this study that 5. sari is distributed in southern coasts of Korea.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.75-79
• /
• 2010

The precursor powders with thin wall structure were prepared by spray pyrolysis from the spray solution with ethylenediaminetetraacetic acid, citric acid and $NH_4Cl$ flux. The $BaMgAl_{10}O_{17}:Eu$ phosphor powders formed from the spray solution without organic additives and flux material had sizes of $1{\sim}5{\mu}m$ and hollow structure with high thickness at post-treatment temperature of $1,200^{\circ}C$. However, $BaMgAl_{10}O_{17}:Eu$ phosphor powders formed from the spray solution with ethylenediaminetetraacetic acid, citric acid and $NH_4Cl$ flux had fine size and plate-like shape. The mean crystallite sizes of the phosphor powders with fine sizes were 23, 35, and 33 nm when the content of $NH_4Cl$ flux were 0, 6, 35 wt% of phosphor. The photoluminescence intensity of the phosphor powders formed from the spray solution with the optimum amount of $NH_4Cl$ flux as 35 wt% was 215% of that of the phosphor powders formed from the spray solution without flux material.