• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.535-543
• /
• 2017

Objective: This study was designed to identify factors affecting pilots' +Gz tolerance recovery from +Gz induced exhaustion. Background: +Gz tolerance of pilots has been considered as a crucial factor to fly the modern high performance fighter aircrafts. However, the factors affecting pilots' G-tolerance recovery from +Gz induced exhaustion have not been examined in the acceleration research community. Method: A centrifuge profile consisting of a high +Gz run for pilot's exhaustion and a low +Gz run for pilot's recovery and another high +Gz runs for pilot's second exhaustion was designed. The subjects' +Gz tolerance recovery ratio was measured by ratio of second high +Gz run time to the first high +Gz run time. The subjects' +Gz tolerance recovery rate was measured by dividing the subjects' +Gz tolerance recovery ratio by the low +Gz run time. The subjects' G-tolerance recovery rate was analyzed with respect to the subjects' personal factors including subjects' anthropometric and physiologic characteristics, flight time, flying aircraft type and so on. Results: The subjects' previous three-month flight hours (r=-0.336, p=0.039), six-month flight hours (r=-0.403, p=0.012) and one-year flight hours (r=-0.329, p= 0.044) correlated with the subjects' G-tolerance recovery rate. Conclusion: The subjects' G-tolerance recovery rate is clearly related to the subjects' previous flight hours. However, the subjects' anthropometric and physiologic characteristics do not show any statistically significant correlation with the subjects' G-tolerance recovery rate. Application: This research provides a safety critical insight to aviation community by identifying the factors to affect the gravity-induced loss of consciousness (GLOC) of pilots.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.4
• /
• pp.234-238
• /
• 1998

To select new germplasm for salinity tolerance from new plant type (NPT) breeding lines, the sixty F$_4$ lines selected from the crosses between Korean cultivars and IRRI's NPT lines were evaluated for salinity tolerance at the seedling stage with salinized culture solution (EC=12 dS/m) in the controlled conditions. Two NTP lines derived from a cross between 'Ilmibyeo' and 'IR66152-AC5-1', 'HR15258-7-1' and 'HR15258-27-1', were found to have good tolerance. The salinity tolerance of the lines was compared to their parents and the sensitive ('IR29') and tolerant ('Pokkali') checks in three salinity levels, no salinity (control) and an EC of 12 and 16 dS/m. Visual salinity score, shoot Na+ and Na-K ratio in two NPT lines was significantly low compared with the parents and IR29. Indicating that salinity tolerance of the lines might be derived from a transgressive segregation. The relative water content of the lines was higher than Pokkali, and the dry weight of shoot and root was proportionally decreased to salinity score and salinizing concentration. The visual salinity scores were significantly correlated with shoot Na concentration, Na-K ratio, relative water content, and reduction of dry weight (P<0.01). Their tolerance was attributed to root and shoot characteristics that led to high shoot water content, thus diluting the toxic effect of salts.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.339-344
• /
• 2003

To identify the new source of breeding materials for rice salt tolerance, the salinity tolerance of thirty-four varieties was evaluated under 0.5% saline condition at seedling stage. The salinity score showed highly significant correlations to dry weight and dead leaf ratio. The tested varieties were classified into three groups by visual score, reduction ratio of dry weight, and dead leaf ratio. Eighteen varieties were classified as the highly tolerant group (salinity scores of 1.3-3.7), seven varieties were fallen into the tolerant group (salinity scores of 4.2-5.8), and others were susceptible (salinity scores of 6.7-9.0). In highly tolerant group, most indica varieties including Getu, Dikwee and Kuatic Putic, didn't exsert a panicle under the Korean climate. But six varieties, Xiangcho V, Annapuruna, HP 3319-2wx-6-3-1, Giza 175, and GZ 2447-S-17, GZ 4255-6-3 were suitable to the Korean climate, and their heading date (6-16, August) and culm length (65-78㎝) were similar to the Korean varieties. Accordingly, these varieties can be utilized as crossing materials for the salt tolerance in japonica rice.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.188-188
• /
• 2017

Rice (Oryza sativa L.) is one of the major crops that is seriously impacted by global soil salinization. Rice is among those crops where most of the high-yielding cultivars are highly sensitive to salinity. The key to a plant survival under NaCl salt stress is by maintaining a high $K^+/Na^+$ ratio in its cells. Selection for salinity tolerance genotypes of rice based on phenotypic performance alone is less reliable and will delay in progress in breeding. Recent advent of molecular markers, microsatellites or simple sequence repeats (SSRs) were used to find out salt tolerant rice genotypes. In the current experiment phenotyping and genotyping studies were correlated to differentiate different rice accessions for salinity tolerance. Eight rice accessions along with check plant Dongjin were screened by physiological studies using Yoshida solution with 50mM NaCl stress condition. The physiology studies identified four tolerant and four susceptible accessions based on their potassium concentration, sodium concentration, $K^+/Na^+$ ratio and biomass. 17 SSR markers were used to evaluate these rice accessions for salt tolerance out of which five molecular markers were able to discriminate tolerant accessions from the susceptible accessions. Banding pattern of the accessions was scored comparing to the banding pattern of Dongjin. The study identifies accessions based on their association of $K^+/Na^+$ ratio with molecular markers which is very reliable. These markers identified can play a significant role in screening large set of rice accessions for salt tolerance; these markers can be utilized to improve salt tolerance of commercial rice varieties with marker-assisted selection (MAS) approach.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.2
• /
• pp.37-43
• /
• 2007

ANOVA is widely used for measurement system analysis. It assumes that the measurement error is normally distributed, which may not be seen in certain industrial cases. In this study, the exact and bootstrap confidence intervals for precision-to-tolerance ratio (PTR) are obtained for the cases where the measurement errors are normally and non-normally distributed and the reproducibility variation can be ignored. Lognormal and gamma distributions are considered for non-normal measurement errors. It is assumed that the quality characteristics have the same distributions of the measurement errors. Three different bootstrap methods of SB (Standard Bootstrap), PB (Percentile Bootstrap), and BCPB (Biased-Corrected Percentile Bootstrap) are used to obtain bootstrap confidence intervals for PTR. Based on a coverage proportion of PTR, a comparative study of exact and bootstrap methods is performed. Simulation results show that, for non-normal measurement error cases, the bootstrap methods of SB and BCPB are superior to the exact one.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.5
• /
• pp.739-748
• /
• 2020

In this study, a method of heat adaptation was implemented in an attempt to increase the upper thermal threshold of two Streptococcus thermophilus found in South Korea and identified the alterations in membrane fatty acid composition to adaptive response to heat. In order to develop heat tolerant lactic acid bacteria, heat treatment was continuously applied to bacteria by increasing temperature from 60℃ until the point that no surviving cell was detected. Our results indicated significant increase in heat tolerance of heat-adapted strains compared to the wild type (WT) strains. In particular, the survival ratio of basically low heat-tolerant strain increased even more. In addition, the strains with improved heat tolerance acquired cross protection, which improved their survival ratio in acid, bile salts and osmotic conditions. A relation between heat tolerance and membrane fatty acid composition was identified. As a result of heat adaptation, the ratio of unsaturated to saturated fatty acids (UFA/SFA) and C18:1 relative concentration were decreased. C6:0 in only heat-adapted strains and C22:0 in only the naturally high heat tolerant strain were detected. These results support the hypothesis, that the consequent increase of SFA ratio is a cellular response to environmental stresses such as high temperatures, and it is able to protect the cells from acid, bile salts and osmotic conditions via cross protection. This study demonstrated that the increase in heat tolerance can be utilized as a mean to improve bacterial tolerance against various environmental stresses.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.2
• /
• pp.45-52
• /
• 2015

Cool-season turfgrass is a rapidly increasing of usage for the revegetation of waterside slopes in dams, lakes and rivers. The purpose of this research is to identify the flooding tolerance of cool-season turfgrass with respect to the flooding periods of 0(control), 2, 4 and 6 days, respectively. The surface coverage ratio, turfgrass injury and soil moisture content were measured to assess the flooding tolerance of cool-season turfgrass. The increase in the flooding periods with 4 and 6 days resulted in the lower surface coverage ratio for cool-season turfgrass while no significant difference was found in the 2 days flooding when compared to 0 day (the control plot) flooding plot. In case of the turfgrass injury and the soil moisture content, however, the higher values were found with the increase of flooding periods in 2, 4 to 6 days. We observed that the higher the turfgrass injury and soil moisture content increased, the lower the surface covrage ratio decreased. In these regards, we also observed that the tolerance of cool season turfgrass were high in the 2 days flooding condition, medium in the 4 days flooding condition and low in the 6 days flooding condition. The flooding tolerance of cool-season turfgrass was gradually weakened in over 2 days flooding periods due to $O_2$ deficiency in the anaerobic soil condition. Therefore, we could suggest cool-season turfgrass within 2 days flooding periods for the revegetation of waterside slopes in dams, lakes and rivers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.3
• /
• pp.236-241
• /
• 2008

The effect of organic solvent mixture ratio on the rheology property of slurry and thickness control of ceramic green sheet was investigated. For selecting a suitable dispersant multiple light scattering method was used to evaluate the particle migration velocity and variation of clarification layer thickness. Using the selected dispersant the dispersion property of solution according to solvent mixture ratio was investigated. Binder and plasticizers were added to formulate slurries and their viscosity was evaluated according to solvent mixture ratio. Ceramic green sheets with average thickness of 30, 50 urn were fabricated via tape casting and their thickness tolerances measured. As a result according to solvent mixture ratio the solution and slurry properties varied and for the mixture ratio of ethanol/toluene of 80/20 the ceramic green sheet with the lowest thickness tolerance was obtained.

• Journal of Korean Society for Quality Management
• /
• v.38 no.4
• /
• pp.580-586
• /
• 2010

Performance variations in mixture products such as medicine, food, and chemicals can be caused by their own subcomponents. For instance, a discharge capacity of a lithium-ion battery depends upon the mixture ratio of ethylene, dimethyle, and ethyle-methyle, all of which are subcomponents of an electrolyte solution in the battery. Thus it is crucial to determine tolerances of the mixture ratio in order to maintain the product quality at a desired level. This paper is concerned with the tolerance design of the mixture ratio. In particular, minimizing variance around the mixture ratio is adopted as a decision criterion in this paper. An illustrative example with multiple quality characteristics is given as well.