• 한국전기전자재료학회논문지
• /
• 제22권1호
• /
• pp.67-73
• /
• 2009

The stress-strain behavior and its effects on the crack initiation and growth of ITO film on PET substrate with a sheet resistance of 45 ohms/sq were investigated. Electrical resistance increased gradually at the strain of 0.7% in the elastic to plastic transition region of the stress strain curves. Numerous cracks were observed after 1% strain and the increase of the resistance can be linked to the cracking of ITO thin films. The onset strain for the increase of resistance increased with increasing strain rate, suggesting the crack initiation is dependent on the strain rate. Upon loading, the initial cracks perpendicular to the tensile axis were observed and propagated the whole sample width with increasing strain. The spacing between horizontal cracks is thought to be determined by the fracture strength and the interfacial strength between ITO and PET. The crack density increased with increasing strain. The spacing between horizontal cracks (perpendicular to the stress axis) increased with decreasing strain rate, The increase of crack density with decreasing strain rate can be attributed to the higher fraction of the plastic strain to the total strain at a given total strain. As the strain increased over 5% strain, cracks parallel to the stress axis were developed and increased in number with strain, accompanied by drastic increases of resistance.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2918-2927
• /
• 2020

This paper proposes a simplified elastic-plastic analysis procedure using the penalty factors presented in the Code Case N-779 for strain-based fatigue assessment of nuclear safety class 1 components under severe seismic loads such as safety shutdown earthquake and beyond design-basis earthquake. First, a simplified elastic-plastic analysis procedure for strain-based fatigue assessment of nuclear safety class 1 components under the severe seismic loads was proposed based on the analysis result for the simplified elastic-plastic analysis procedure in the Code Case N-779 and the stress categories corresponding to normal operation and seismic loads. Second, total strain amplitude was calculated directly by performing finite element cyclic elastic-plastic seismic analysis for a hot leg nozzle in pressurizer surge line subject to combined loading including deadweight, pressure, seismic inertia load, and seismic anchor motion, as well as was derived indirectly by applying the proposed analysis procedure to the finite element elastic stress analysis result for each load. Third, strain-based fatigue assessment was implemented by applying the strain-based fatigue acceptance criteria in the ASME B&PV Code, Sec. III, Subsec. NB, Article NB-3200 and by using the total strain amplitude values calculated. Last, the total strain amplitude and the fatigue assessment result corresponding to the simplified elastic-plastic analysis were compared with those using the finite element elastic-plastic seismic analysis results. As a result of the comparison, it was identified that the proposed analysis procedure can derive reasonable and conservative results.

• Parasites, Hosts and Diseases
• /
• 제34권1호
• /
• pp.79-86
• /
• 1996

형태적으로 Aconaqmoebcusteuon리로 동정된 한국토양분리주 KA/S2의 일부 특성을 파악하여 A. castellanii로 알려진 4가지 reference 주(Castellani, Neff, fna 및 Chang주) 와 비교하였다 K4/s2주의 mitochondria(Mt) DNARFLP와 isoelectricforusing(IEF)로 분석한 동위효소 양상은 California 토양에서 분리된 Neff주의 그것과 동일하였으나 고 외의 주들 사이에는 심한 다양성이 과찰되었다. Chang주의 형태 및 전 단백질 양상은 다른 주에 비해 독특하였다. Aconamoeba app. 분리주의 동정 및 특성 파악에 Mt DNA RFLP 분석이 매우 유용할을 확인하였다. Aconamoebacasteunil의 우리말 학명을 카스텔라니가시아메바로 제안한다.

• 한국작물학회지
• /
• 제50권spc1호
• /
• pp.216-219
• /
• 2005

This objective of this study was to determined the activity of antioxidants of DPPH, SOD and total phenolic compounds in mushroom(P. eryngii spp.) extract. The antioxidant acitivity using DPPH showed that strain No. 2007$(31.78\%)$ and strain No.2014$(27.45\%)$ were the highest DPPH inhibition. Among the thirteen mushroom examined, strain No. 2014$(58.30\%)$ and strain No. 2010$(57.19\%)$ had the highest SOD activity. The highest total phenol content were in strain No.2013$(1465.03{\mu}g/g)$ and strain No.2005$(1401.09{\mu}g/g)$. Our study suggest that it may be possible to improve mushroom with high natural antioxidant.

• 한국농공학회지
• /
• 제44권1호
• /
• pp.103-115
• /
• 2002

During this study, various stress path tests in previous isotropic and anisotropic (compression and tension) stress histories are performed on weathered granite soil sampled at Iksan, Jeonbuk. Yielding points are determined from various stress-strain curves(stress ratio-shear strain, volumetric strain, normalized energy and dissipated total energy curves). The shape and characteristics of isotropic and anisotropic yielding curves are examined. The main results are summarized as follows . 1) Yielding curries defined from stress ratio - normarized energy and dissipated total energy curves show almost perfect ellipse. 2) Directions of plastic strain incremental vector are not perpendicular to yielding curve. 3) Normarized energy and dissipated total energy spread with similar tendency with respect to yielding currie in stress space.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.64-70
• /
• 2009

This study is to analyze the impact of automotive body with computer simulation. The total deformation, equivalent strain and strain and principal stress are analyzed respectively in case of front, rear and side impacts. The maximum total deformation of side impact is more than 6 times as large as that of rear impact. The maximum equivalent strain or stress of side impact is more than 4 times as large as that of rear impact. These deformation, strain and stress of front impact are a little more than those of rear impact. The maximum principal stress of side impact is more than 4.5 times as large as that of rear impact. This stress of front impact is a little more than that of rear impact.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.86-87
• /
• 2017

The high-temperature creep of Ultra-High-Strength Concrete (UHSC) has been investigated in this study. The purpose of this study is to evaluated total strain and high-temperature creep at elevated temperatures under loading condition of UHSC. As results, Total strain of UHSC increased showing shrinkage with increasing compressive strength. The high-temperature creep of UHSC increased with the temperature and higher level of compressive strength showed bigger high-temperature creep.

• Ocean and Polar Research
• /
• 제26권3호
• /
• pp.415-423
• /
• 2004

An experiment was conducted to investigate the differences of total ammonia nitrogen (TAN) excretion rates and feces production rates among the offsprings from cultured Japanese strain (JJ, mean BW; $17.1{\pm}0.1g$), intraspecific hybrid strain between cultured Japanese and selected Korean strain (JK, mean BW: $17.1{\pm}0.1g$) and selected Korean strain(KK, mean BW: $21.5{\pm}0.1g$) of red sea bream in order to compare their dietary protein utilization efficiency. Fish were hand-fed with a commercial diet containing 46.7% crude protein for 2 weeks, three times daily 09:00, 13:00 and 17:00. After daily feeding, the TAN excretion rates reached peaks of 49.03, 58.75 and 36.26mg/kg fish/hr for the JJ, JK and KK strain, respectively, during the daytime. The value of the KK strain was significantly lower than that of the JJ and JX shuin (P<0.05), however daily TAN excretion rates of the JJ, JK and KK strain were not different (P>0.05). When fish were fed at satiation after 4 days of starvation, TAN excretion rates reached the maximum values 4 hours after the feeding fur the KK (31.23 mg/kg fish/hr) and 6 hours after the feeding fur the JJ (44.19 mg/tg fish/hr) and JK strain (41.70 mg/kg fish/hr). After 3 days of starvation, the daily endogenous TAU excretion rates (ETE) for the JJ, JK. and KK strain were 286.91, 215.66 and 179.29mg/kg fish/day, respectively. The value of the KK strain was lower than that of the JJ and JK strain (P<0.05). The total feces production rates of the JJ, JK and KK strain were not significantly different, however the proportions of feces production rates by time for the JJ, JK and KK strain were different (P<0.05). As overall results, efficiency of dietary protein utilization of JJ, JK and KK seems to be different and KK strain could offer a desirable option for aquaculture purpose.

• 한국재료학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2009

In this study, the stress-strain response and the cracking behaviors of ITO film on a PET substrate are investigated. The cracking behaviors of ITO thin films deposited on a thermoplastic semi-crystalline polymer developed for flexible display applications was investigated by means of tensile experiments equipped with an electrical measurement apparatus and an in-situ optical microscope. Electrical resistance increased gradually in the elastic-to-plastic transition region of the stress strain curves and cracks formed. Numerous cracks were found in this region, and the increase of the resistance was linked to the cracking of ITO thin films. Upon loading, the initial cracks perpendicular to the tensile axis were observed at about 1% of the total strain. They propagated to the entire sample width as the strain increased. The spacing between the horizontal cracks is thought to be determined by the fracture strength and the thickness of the ITO film as well as by the interfacial strength between the ITO and PET. The effect of the strain rate on the cracking behavior was also investigated. The crack density increased as the strain increased. The spacing between the horizontal cracks (perpendicular to the stress axis) increased as the strain rate decreased. The increase of the crack density as the strain rate decreased can be attributed to the higher fraction of the plastic strain to the total strain at a given total strain. The higher critical strain for the onset of the increase in the resistance and the crack initiation of the ITO/PET with a thinner ITO film (300 ohms/sq.) suggests a higher strength of the thinner ITO film.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.115-121
• /
• 2014

Alloy 617 is the one of the leading candidate materials for intermediate heat exchangers(IHX) of a very high temperature reactor(VHTR) system. Some of the components are joined by many welding techniques and therefore the welded joints are inevitable in the construction of systems. In the present paper, the low cycle fatigue(LCF) behaviors of Alloy 617 base metal(BM) and the gas tungsten arc welded (GTAWed) weld joints(WJ) are investigated experimentally under strain controlled LCF tests. Fully axial total-strain controlled tests have been conducted at room temperature with total strain ranges of 0.6, 0.9, 1.2 and 1.5%. The weld joints have shown a lower fatigue lives compared with base metals at all the testing conditions. The weld joints have shown a higher cyclic stress response behavior than base metal. Both BM and WJ exhibited cyclic strain hardening behavior, depending on the total strain range. In addition, the strain-life parameters for BM and WJ were determined, based on Coffin-Manson equations.