• 제목/요약/키워드: Transfer stability

검색결과 954건 처리시간 0.034초

Investigation of the effects of common and separate ground systems in wireless power transfer

  • Park, Woocheon;Moon, Jung-Ick;Cho, In-kui
    • ETRI Journal
    • /
    • 제44권2호
    • /
    • pp.339-345
    • /
    • 2022
  • This article presents an investigation of the effects on a grounding system of wireless power transfer (WPT) when transmitting over relatively far distances, that is, up to 1.25 m. Conventional two-coil WPT systems are sufficiently commercialized in strong coupling range, but it is important to accomplish the long-range WPT in weak coupling range for further various applications. This system depends on the coupling effect between the two coils that the grounds of the transmitting and receiving coils should be completely separated. However, when evaluating the performance of two-coil systems with the instrument consisting of two ports and one common ground, undesirable problems occur in weak coupling ranges, for example, obtaining disagreeable transmission efficiency and degrading system stability/reliability. We investigate the problems of the leakage power from common ground systems and provide a practical solution to obtain a reliable WPT system by using an isolation transformer. The usefulness of this approach is that it is possible to achieve the stability of the system with relatively far transmitting distances and to determine the exact transmission efficiency.

전압센싱 전압주입 전향 능동형 EMI 필터의 안정도해석 (Stability Analysis of Feed-forward Type VSVI Active EMI filter)

  • 강병극;최용오;정세교
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.329-330
    • /
    • 2016
  • This paper deals with stability of active EMI filter. Feed-forward type voltage-sensing voltage-injection (VSVI) AEF is best topology when considering the filter size and leakage current. But it is not studied in stability. Therefore, the detailed and simplified transfer function is derived and it is used to analyze stability. The experimental results are provided to verify the effectiveness of the analysis.

  • PDF

APD용 TIA 회로의 안정성 개선을 위한 Quenching 저항 영향 분석 (Analysis of Quenching Resistor Effect to Improve Stability of TIA Circuit for APD)

  • 기동한;진유린;김성미;조성익
    • 전기전자학회논문지
    • /
    • 제26권3호
    • /
    • pp.373-379
    • /
    • 2022
  • LTV(Light to Voltage) 변환을 위한 APD(Avalanche Photo Diode)는 다른 PD(Photo Diode)와 다르게 높은전압의 동작영역을 사용하므로 TIA(Transimpedance Amplifier) 사용시 과전류 방지를 위해 Quenching 저항을 직렬로 연결하여야 한다. 그러한 경우 Quenching 저항이 TIA 전달함수에 영향을 미쳐 안정도에 심각한 결과를 초래할 수 있다. 본 논문에서는 APD Quenching 저항이 TIA의 전압과 전류 루프 전달함수에 미치는 영향을 분석하여 안정도 개선을 위한 Quenching 저항 값 결정 방법을 제안하고자 한다. 제안된 방법에 의하여 Quenching 저항을 가지는 TIA 회로를 설계하여 시뮬레이션 및 칩 제작을 통하여 동작의 안정도를 검증하였다.

점성포텐셜유동을 이용한 이상유동장의 표면안정성 해석 (Stability analysis of gas-liquid interface using viscous potential flow)

  • 김형준;권세진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.3033-3038
    • /
    • 2007
  • In this research, Rayleigh instability of gas-liquid flow in annular pipe is studied in film boiling using viscous potential flow. Viscous potential flow is a kind of approximation of gas-liquid interface considering velocity field as potential including viscosity. A dispersion relation is obtained including the effect of heat and mass transfer and viscosity. New expression for dispersion relation in film boiling and critical wave number is obtained. Viscosity and heat and mass transfer have a stabilizing effect on instability and its effect appears in maximum growth rate and critical wave number. And the existence of marginal stability region is shown.

  • PDF

경사진 등온 평판위 의 자연대류 유동 에서의 와류 불안정성 과 열전달 상관관계 (Vortex Instability and Heat Transfer Correlations in the Natural Convection Flow over Inclined Isothermal flat Plates)

  • 최창균;유정열;이형인
    • 대한기계학회논문집
    • /
    • 제8권1호
    • /
    • pp.10-17
    • /
    • 1984
  • The critical conditions marking the onset of thermally induced vortices over an inclined iso-thermal plate are investigated using the linear stability theory. The stability equations are simplified by estimating the orders of magnitude of respective terms. The analysis is carried out under the assumption that for the system of large Prandtl numbers temperature disturbances are initiated within the conventional thermal boundary layer of the basic flow. The stability criteria obtained from the present results agree well with those of the existing quasi-parallel flow models. In addition it is found that the critical conditions generate the heat transfer correlation in good agreement with experiments. Therefore, it is suggested that the validity of existing theoretical models will be reexamined.

가우스 잡음을 고려한 비선형 펄스 변조 시스템의 안정도 분석 (Stability Analysis of Nonlinear Pulse-Modulated System Subject to Gaussian Noise)

  • 강영채
    • 대한전자공학회논문지
    • /
    • 제19권6호
    • /
    • pp.67-79
    • /
    • 1982
  • 가우스 잡음의 출현시 PWM 시스템의 안정도가 연구되었다. 일반 시스템은 종래의 서술 함수 방법을 이용할 때 비선형 소자와 선형 소자로 나누어진다. 등가 어드미턴스 개념이 이 시스템의 비선형 소자의 전달 특성을 구하는데 사용되었다. 이 논문에서는 가우스 잡음만이 존재하는 경우 자기 발진 조건이 유도되었고 그 결과를 컴퓨터 시뮬레이션으로 분석하였다. The stability of general pulse-width modulation system with Gaussian random disturbance was discussed . General system is divided into nonlinear and linear elements using the conventional describing function method. The concept of the equivalent admittance was used to find the transfer characteristic of the nonlinear element of the system. In this paper the self-sustained oscillation condition in the autonomous system was derived and the results was analyzed with computer simulation.

  • PDF

수도권 전압안정도 향상을 위한 100MVA STATCOM 위치선정 연구 (The Site Selection of 100MVA STATCOM for Voltage Stability Enhancement in Korean Metropolitan Area)

  • 장병훈;김수열;한정열;최돈근;송화창;이병준
    • 전기학회논문지
    • /
    • 제56권9호
    • /
    • pp.1543-1548
    • /
    • 2007
  • This paper reports a study on determination of the adequate location of 100 MVA STATCOM regarding the transfer capability enhancement on the metropolitan interface as well as the economy in system operation. The base case in the study was established considering a scenario of the energy support to North Korea from the KEPCO (Korea Electric Power Corporation) system through a HVDC interconnection. In the base case, the energy support was approximately modeled with a load of 1500 MW, and by the load addition, the system was weakened in terms of voltage stability and transfer capability. After a thorough investigation on the case, the location of the STATCOM was decided to compensate the reactive deficit of the modified system and to maximize the operational benefit which can be estimated by FV analysis.

자동차용 마찰재에 사용되는 아라미드 섬유와 티탄산칼륨 섬유의 역할 (The Roles of Aramid Pulp and Potassium Titanate Whisker in the Automotive Friction Materials)

  • 김성진;임현우;장호
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제30회 추계학술대회
    • /
    • pp.213-218
    • /
    • 1999
  • Friction and wear characteristics of novolac resin-based friction materials reinforced with aramid pulp and potassium titanate were investigated by using a pad-on-disk type friction tester. Friction properties such as friction stability, surface morphology, and wear rate varied according to the relative amount of aramid pulp and potassium titanate. The friction materials reinforced with both aramid pulp and potassium titanate showed superior friction stability and wear resistance due to the formation of durable transfer layer.

  • PDF

Hole Transfer Layer p-doped with a Metal Oxide for Low Voltage Operation of OLEDs

  • Shin, Won-Ju;Lee, Je-Yun;Kim, Jae-Chang;Yoon, Tae-Hoon;Kim, Tae-Shick;Song, Ok-Keun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.435-438
    • /
    • 2007
  • $V_{2}O_{5}$ was tested as a p-dopant for lower operating voltage and higher stability of OLEDs. Low voltage and high stability were achieved using this doping layer. It can be separated to bulk and interface contributions and the latter is a more dominant factor both of operation voltage and stability.

  • PDF

멀티형 공조/냉동시스템의 증발기 과열도 제어 (Evaporator Superheat Control of a Multi-type Air-conditioning/Refrigeration System)

  • 김태섭;홍금식;손현철
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집B
    • /
    • pp.712-717
    • /
    • 2001
  • This paper investigates the control problem of evaporator superheat, i.e., the difference between the temperature of the refrigerant at the entrance region of an evaporator and that at the exit region, for multi-type air-conditioning/refrigeration systems. Mathematical equations describing the characteristics of compressor, condenser, evaporator, and electronic expansion valve are first derived. Then, the transfer functions from the current input of the electronic expansion valve to wall temperatures of evaporator tube at two-phase region and superheated region, respectively, are derived. The stability and performance of the closed loop system with a PI controller are analyzed by Nyquist stability criterion. Simulation results are provided.

  • PDF