• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.296-296
• /
• 2000

This paper describes the features of a transmission line and a wiring, and a design rule based on a demanded condition for a wiring. Like as the simulation of a circuit, by tracking the wiring path among parts that are disposed on PCB, we analyze the feature of the corresponding wiring using the design formula and rule. We implement a signal integrity simulator, which is capable of electrical and electronic simulation for the feature of a wiring signal and the corresponding signal, and the results are demonstrated.

• 한국전자통신학회논문지
• /
• 제14권2호
• /
• pp.289-296
• /
• 2019

최근 스마트폰 카메라 기술의 발달로 고화질의 동영상을 촬영할 수 있다. 이러한 기술을 다양한 방법으로 활용하기 위해 디스플레이 등의 외부 장치로 신호 전송이 가능하여야 한다. 영상신호의 전송 성능은 전송선로의 손실과 배선의 길이에 따라 결정된다. 논문에서는 스마트폰 디자인에 따라 변경되는 배선 길이와 인쇄회로기판 도체 배선 소재 표면 거칠기 진폭에 따른 HDMI 전송선로 설계 기준을 제안하였다. 또한 실제 스마트폰 설계에 제안된 설계 기준을 적용하여 검증하였다. 본 논문을 통해 제안된 설계 기준은 모바일 어플리케이션외 고속신호 전송선로가 포함되는 다양한 응용분야에 확대 적용될 수 있을 것으로 판단된다.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1479-1484
• /
• 2011

The existing leg-rest for transmission line construction was established on the ground as a structure. As a result of that, it caused some problems such as, a tremendous forest damage, excessive construction costs and the long time of construction period. In order to solve these problems, we suggest the protective net for an air installation. It is a new method of construction which has a dielectric strength with a light-weight and high-strength. And it's not influenced by a geographical feature. This excellent method doesn't affect a forest and can reduce tremendously the construction cost and period.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.80-82
• /
• 2005

There is a method for stringing conductors which is connected to a wire over transmission towers by helicopter or human power and the wire and conductors are pulled by an engine puller. The length of one string section is usually 4-6 km and 2-4 conductors are strung at the same time with a single wire. A tensioner is used to maintain the sag and a running board is installed between the wire and conductors to prevent the rotation of conductors but the variance in topology, the line angle and unequal wiring tension between conductors causes conductor rotation damage or the conductor connection point to breakaway when the pulley is passed. This paper presents a method to prevent conductor rotation during stringing by inserting a pulley in the running board and equally maintaining conductor tension by sling wire after developing and testing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.476-478
• /
• 1993

Instead of installing new communication wiring to each house in the apartment house building. the power distribution network. which is already installed in the building. can be use as communication medium. In a safty management, by adoption of power line communication system, at remote we can monitor safty related sensors such as fire, gas leakage, burglar intrusion and emergency call which are located at each house. From this viewpoint, we developed security monitoring system for apartment house building using power lines. Security monitoring system consists of Power Line Communication-Sub Controller (PLC-SC). Power Line Communication-Main Controller (PLC-MC) and Management System (MS). Between a PLC-MC and a PLC-SC, the transmission rate is 1200 bps in power lines and modulation technique is frequency shirt keying (FSK). In between a PLC-MC and a MS, the transmission rate is 1200 bps in communication line (RS-485). As a result of this research. transmission loss is 0.1dB per meter of intrabuilding distribution network. Transmission can be reach in 250 meters. So it is enough to communicate for security monitoring system in apartment house building.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.450-451
• /
• 2006

The method of conductor wiring is that a messenger wire is installed, the end of the wire is connected to the conductor and a engine puller pulls the conductor. The length of one section of wiring is $3{\sim}5km$ and one group messenger wire pulls simultaneously $2{\sim}4$ group conductor, while a tensioner maintains wiring tension to prevent the deflection of the conductor. However, there are many obstacles such as roads, power lines, communication lines, buildings, farms and crops. Therefore to prevent damage from conductor deflection a staging is used. The currently used staging is scaffolding lumber which is difficult to secure and it's construction efficiency is very low because it requires a lot of time and manpower. So this study developed a insulating defense tube and pipe connecting device, and a truss structure fabrication module using steel pipe which reduces construction time and cost through a compressive and dielectric strength test.

• 정보처리학회논문지C
• /
• 제13C권7호
• /
• pp.881-888
• /
• 2006

기존 공동주택의 구내통신 선로설비 중의 댁내배선은 대부분 버스 배선 형태의 구조로 아웃렛의 위치에 따라 브릿지 탭(Bridged Tap)이 존재하게 된다. 이 브릿지 탭은 높은 주파수 대역을 사용하는 고속멀티미디어 통신의 특정 주파수에서 반사손실의 특성이 저하되어 선로의 감쇠가 급격히 증가하여 전송성능을 저하시키고 있어 이에 대한 분석이 필요하다. 본 논문에서는 기존 주거용 공동주택의 대표적인 아파트의 구내선로 구조 및 댁내 배선환경을 파악하고, 현업의 구내통신설비를 모델링하여 시험모형을 제작하여 VDSL 서비스 성능을 측정하였다. VDSL 서비스 시 브릿지 탭에 의해 성능에 미치는 영향을 분석하여, 기존 구내통신 선로의 문제점을 파악하고, 향후 초고속 멀티미디어 서비스 수용에 적합한 구내통신 선로의 품질개선 방안을 제시하였다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.192-196
• /
• 2010

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. The strength of the PLC has no more additional wiring work. PLC has also possible to high quality data transmission with currently electrical cable. It has a various strong point campare with existing wire and wireless communication technologies. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. The video function was used for the VEDEO TEST GENERATOR in order to a property valuation. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal. It can be possible to have HD class Media service through the PLC.

• 한국통신학회논문지
• /
• 제27권8C호
• /
• pp.782-791
• /
• 2002

본 논문은 FEXT (far-end crosstalk) canceller에 관한 연구이다. Fiber to the curb (FTTC), very high speed digital subscriber와 같은 많은 동축선로 시스템에서 양방향 전송을 위해 frequency-division duplexing (FDD)를 사용한다. FDD 동축전송 시스템의 최고의 도달 거리는 하향채널보다는 높은 주파수에 위치한 상향 채널에 의해서 제한된다. 그런 FDD 송수신의 성능을 개선하기 위해서 높은 주파수에 있는 채널은 FEXT 제거를 적용하게 된다. 시스템을 배열과 그것은 blind startup 은 채널의 intersymbol interference (ISI), FEXT와 다른 잡음을 막기 위해 FEXT 제거기와 등화기를 함께 적용함으로써 연구한다. 이상적 훈련 신호를 전송하지 않고, 제안된 동축선로상에서 초기 수렴과 수렴된 후의 상태를 알아본다. 또한 FEXT 채널의 분석한 모델뿐만 아니라, 측정된 특성은 FEXT 제거기를 위해 필요한 기간을 측정하기 위해 사용되어진다. 또한 FEXT 제거기를 위한 메모리 수가 채널에 독립적이기 때문에, 제안된 시스템은 모든 독립적인 채널 상에서 동축 시스템에 대해 유용하게 적용할 수 있다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권10호
• /
• pp.435-442
• /
• 2006

One of the most important topics about the safety of electrical and electronic system is the reliability of the wiring system. The Time-Frequency Domain Reflectometry(TFDR) is a state-of-the-art system for detecting and estimating of the fault on a wiring. In this paper, We've considered the load resistance measurement on a coaxial cable using TFDR in a way of expanded application. The TFDR system was built using commercial Pci extensions for Instrumentation(PXI) and LabVIEW. The proposed real time TFDR system consisted of the reference signal design, signal generation, signal acquisition, algorithm execution and results display part. To implement real time system, all of the parts were programmed by the LabVIEW which is one of the graphical programming languages. Using the application software implemented by the LabVIEW, we were able to design a proper reference signal which is suitable for target cable and control not only the arbitrary waveform generator in the signal generation part but alto the digital storage oscilloscope in the signal acquisition part. By using the TFDR real time system with the terminal resistor on the target cable, we carried out load impedance measurement experiments. The experimental results showed that the proposed system are able not only to detect the location of impedance discontinuity on the cable but also to estimate the load resistance with high accuracy.