• 수산해양기술연구
• /
• 제40권3호
• /
• pp.206-213
• /
• 2004

종횡비, 다각형 모양에 따른 평판과 범포의 유체역학적 특성을 규명하고자 직사각형, 사다리꼴 모양으로 모형 평판과 범포를 제작하고 회류수조에서 양 ${\cdot}$ 항력 실험을 수행하였다. 그 결과를 요약하면 다음과 같다. 1. 삼각형 평판의 경우, 종횡비가 1 이하인 모형에서는 38${\sim}$42$^{\circ}$에서 최대 $C_L$이 1.23${\sim}$1.32, 1.5 이상인 모형에서는 20${\sim}$50$^{\circ}$에서 $C_L$이 약 0.85 전후였다. 역삼각형 평판의 경우, 종횡비가 1 이하인 모형에서는 영가가 36${\sim}$38$^{\circ}$에서 최대 $C_L$이 1.46${\sim}$1.56, 1.5 이상인 모형에서는 22${\sim}$26$^{\circ}$에서 1.05${\sim}$1.21 정도였다. 같은 삼각형 평판 모형에서는 전자의 모형이 후자보다 $C_L$이 작게, 양항비도 작게 나타났다. 2. 삼각형 범포의 경우, 종횡비가 1 이하인 모형에서는 영각 46${\sim}$48$^{\circ}$에서 최대 $C_L$이 1.67${\sim}$1.77, 1.5 이상인 모형에서는 20${\sim}$50$^{\circ}$에서 $C_L$이 약 1.1 전후였다. 역삼각형 범포의 경우, 종횡비가 1 이하인 모형에서는 영각 28${\sim}$32$^{\circ}$에서 최대 $C_L$이 1.44${\sim}$1.68, 1.5 이상인 모형에서는 18${\sim}$24$^{\circ}$에서 10.3${\sim}$1.18 정도였다. 같은 삼각형 범포 모형에서는 전자의 모형이 후자보다 $C_L$은 크게, 양항비는 작게 나타났다. 3. 모형에서 물의 유체력을 많이 받을 수 있는 곳에서 만곡꼭지점이 만들어지며, 삼각형 모형에서는 종횡비가 클수록, 역삼각형 모형에서는 작을수록 만곡꼭지점의 위치도 컸다. 4. 만곡도는 전 모형에서 종횡비가 클수록 컸으며, 삼각형 모형에서는 영각이 클수록 컸고 역삼각형 모형에서는 작을수록 컸다.

• 대한조선학회논문집
• /
• 제31권4호
• /
• pp.32-40
• /
• 1994

선박설계에 있어 초기선형설계는 설계요구를 만족하는 초기선형 정의와 정의된 선형의 순정 과정을 거친다. 이 과정에서 선형의 3차원적 정의와 효과적인 순정방법이 동시에 요구된다. 본 논문에서는 곡선망 선형순정법의 결과로 얻어지는 곡선망 선형을 이용하여 곡면간 기하학적 연속($GC^1$)이 만족되는 곡면으로 선형을 정의하였다. 본 논문에서 제시된 방법은 곡선망의 생성과정에서 나타날 수 있는 불규칙한 다각형에 대해서도 곡면화가 가능한 방법이다. Hermite 혼합 Coons 면조각, Convex 조합, Gregory 면조각 보간방법을 선형곡면화에 적용시켜 선체를 3차원 곡면으로 표현했다. 생성된 곡면의 순정도에 대한 검증은 곡면간 교차를 통한 수치적인 방법을 적용하였으며, 실선에 작용한 결과를 예로서 보였다.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.681-689
• /
• 2023

Purpose: Muons are characterized by a strong penetrating ability and can travel through thousands of meters of rock, making them ideal to image large volumes and substances typically impenetrable to, for example, electrons and photons. The feasibility of 3D image reconstruction and material identification based on a cosmic ray muons tomography (MT) system with triangular bar plastic scintillator detectors has been verified in this paper. Our prototype shows potential application value and the authors wish to apply this prototype system to 3D imaging. In addition, an MT experiment with the same detector system is also in progress. Methods: A simulation based on GEANT4 was developed to study cosmic ray muons' physical processes and motion trails. The yield and transportation of optical photons scintillated in each triangular bar of the detector system were reproduced. An image reconstruction algorithm and correction method based on muon scattering, which differs from the conventional PoCA algorithm, has been developed based on simulation data and verified by experimental data. Results: According to the simulation result, the detector system's position resolution is below 1 ~ mm in simulation and 2 mm in the experiment. A relatively legible 3D image of lead bricks in size of 20 cm × 5 cm × 10 cm used our inversion algorithm can be presented below 1× 10⁴ effective events, which takes 16 h of acquisition time experimentally. Conclusion: The proposed method is a potential candidate to monitor the cosmic ray MT accurately. Monte Carlo simulations have been performed to discuss the application of the detector and the simulation results have indicated that the detector can be used in cosmic ray MT. The cosmic ray MT experiment is currently underway. Furthermore, the proposal also has the potential to scan the earth, buildings, and other structures of interest including for instance computerized imaging in an archaeological framework.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.649-654
• /
• 2009

The finite element based lattice Boltzmann method (FELBM) has been developed to model complex fluid domain shapes, which is essential for studying fluid-structure interaction problems in commercial nuclear power systems, for example. The present study addresses a new finite element formulation of the lattice Boltzmann equation using a general weighted residual technique. Among the weighted residual formulations, the collocation method, Galerkin method, and method of moments are used for finite element based Lattice Boltzmann solutions. Different finite element geometries, such as triangular, quadrilateral, and general six-sided solids, were used in this work. Some examples using the FELBM are studied. The results were compared with both analytical and computational fluid dynamics solutions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.53-56
• /
• 2001

Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and it includes some steps such as scanning of a clay or wood model, and generating some manufacturing data in an STL file. A new approach to remove point data with Delaunay triangulation is introduced to deal with the size problems of STL file and the difficulties in the operation of RP process. This approach can be used to reduce a number of measuring data from laser scanner within a specified tolerance, thus it can avoid the time for handing point data during modeling process and the time for verifying and slicing STL model during RP process. Developed software enables the user to specify the criteria for the selection of group of triangles either by the angle between triangles or the percentage of triangles reduced, and thus RP models with accuracy will be helpful to automated process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.129-132
• /
• 1997

Laser scanning is widely used due to its fast measuring and high precision, and the segmentation of the scanned data is necessary for the fast and efficient surface modelling. But most segmentation techniques are based on the very regular data and the adaptation of previous techniques to the scanned data does not usually produce good result. A new approach to perform the segmentation on the scanned data is introduced to deal with problems during reverse engineering process. The approach is based on the triangulated data and its result is depending on the some user-defined criteria. The result is illustrated to demonstrate its adaptability to the measured data on free-form surface and the each result by different criteria is compared respectively.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.190-199
• /
• 2006

A new approach which combines implicit surface scheme and recursive subdivision method is suggested in order to fill the holes with complex shapes in the polygon model. In the method, a base surface is constructed by creating smooth implicit surface from the points selected in the neighborhood of holes. In order to assure C$^1$ continuity between the newly generated surface and the original polygon model, offset points of same number as the selected points are used as the augmented constraint conditions in the calculation of implicit surface. In this paper the well-known recursive subdivision method is used in order to generate the triangular net with good quality using the hole boundary curve and generated base implicit surface. An efficient anisotropic smoothing algorithm is introduced to eliminate the unwanted noise data and improve the quality of polygon model. The effectiveness and validity of the proposed method are demonstrated by performing numerical experiments for the various types of holes and polygon model.

• Nuclear Engineering and Technology
• /
• 제41권7호
• /
• pp.893-906
• /
• 2009

The present work presents the development of a Large Eddy Simulation (LES) methodology viable for complex geometries and suitable for the simulation of rod-bundles. The use of LES and Direct Numerical Simulation (DNS) allows for a deeper analysis of the flow field and the use of stochastical tools in order to obtain additional insight into rod-bundle hydrodynamics. Moreover, traditional steady-state CFD simulations fail to accurately predict distributions of velocity and temperature in rod-bundles when the pitch (P) to diameter (D) ratio P/D is smaller than 1.1 for triangular lattices of cylindrical pins. This deficiency is considered to be due to the failure to predict large-scale coherent structures in the region of the gap. The main features of the code include multi-block capability and the use of the fractional step algorithm. As a Sub-Grid-Scale (SGS) model, a Dynamic Smagorinsky model has been used. The code has been tested on plane channel flow and the flow in annular ducts. The results are in excellent agreement with experiments and previous calculations.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1650-1657
• /
• 2019

Fluidelastic instability and nonlinear dynamics of tube bundles is a key issue in a steam generator. Especially, once the post-instability motion of the tube becomes larger than the clearance gap to other tubes, effective contact or impact between the tubes under consideration and the other tube inevitable. There is seldom theoretical analysis to the nonlinear dynamic characteristics of a tube array in two-phase flow. In this paper, experimental and numerical studies were utilized to obtain the critical velocity of the flow-induced instability of a rotated triangular tube array. The calculation results agreed well with the experimental data. To explore the post-instability dynamics of the tube array system, a Runge-Kutta scheme was used to solve the nonlinear governing equations of tube motion. The numerical results indicated that, when the flow pitch velocity is larger than the critical velocity, the tube array system is undergoing a limit cycle motion, and the dynamic characteristics of the tube array are almost similar for different void fractions.

• 환경생물
• /
• 제39권4호
• /
• pp.523-525
• /
• 2021

Two species of the genus Oxytate L. Koch, 1878 have been recorded in Korea to date. The spider fauna was surveyed in the mountainous terrain of Mt. Hallasan National Park in 2019. A female of Oxytate lobia sp. nov. was collected with a sweep net between shrubs in mixed forests during a seasonal spider survey and is described with measurements, morphological illustrations, and a diagnosis. The new species can be easily distinguished from similar species within the genus by the long copulatory duct conjugated with a spermatheca, a pair of triangular pits at the bottom, and no ditches.