• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.726-736
• /
• 2012

This paper deals with Spin/Stall Recovery Parachute System from design to ground taxiing stage which would be deployed on the high speed taxi of turbo-prop airplane. In detail design phase, design parameters- riser length, parachute type, size, porosity, parachute canopy filling time, and deployment method- were considered based on the analytical disciplines such as aerodynamics, structures, and stability & control. Before the installation of Spin/Stall Recovery System of turbo-prop airplane, all control functions of this system were validated by the SBTB(System Breakout Test Box) in the laboratory. SBTB was used to confirm if it can detect faults, and simulate the firing of pyrotechnic devices that control the deployment and jettison of it. Once confirmed normal operation, deployment of parachute on the high speed taxiing were performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1659-1662
• /
• 1997

The objective of this paper is to estimate the aerodynamic derivatives of a single turbo-prop aircraft at a specified flight condition for the best deduction of the dynamic characteristics using modified maximum likelihood estimation method whcih is known to be unbiased, efficient, and consistent. The flight test data necessary to the estimation of aerodynamic derivatives is obtained by implementing the six degree of freedom nonlinear flight simulation to consider the effects of several control input types, control deflection amplitudes, and intensity of turbulence. The simulated data is added with the measurement noise, which is regarded as the actual flight test data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.38-44
• /
• 1998

The modified maximum likelihood estimation method is used to estimate the nondimensional aerodynamic derivatives of a single turbo-prop aircraft at a specified flight condition for the best deduction of the dynamic characteristics. In wind axes the six degree of freedom equations are algebraically linearized so that the linear state equation contains aerodynamic derivatives in a state-space form and is used in the maximum likelihood method. The simulated data added with the measurement noise is used as a flight test data which is necessary to the estimation of nondimensional aerodynamic derivatives. It is obtained by implementing the 6-DOF nonlinear flight simulation. In the flight simulation, the effects of several control input types, control deflection amplitudes, and the turbulence intensities on the statistical convergence criteria are also examined and quantitative analysis of the results is discussed.

• Tribology and Lubricants
• /
• v.6 no.1
• /
• pp.7-16
• /
• 1990

본 보에서는 지난호(윤활학회지 Vol.5, No.2 1989. 10)에 이어 synlube 중 ester oil의 제조 및 합성유와 광유와의 물성 비교 결과를 요약하여 기술하였다. 천연 ester oil인 동,식물유가 윤활유로 사용된 역사는 기원전 1600년경 부터이다. 그러나 ester계 합성유는 저온성상 및 윤활성을 향상시킬 목적으로 2차대전 중 독일과 미국에서 연구를 시작하여 1947년 영국에서 diester oil을 turbo-prop 엔진으로 사용하기 시작하였다.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.141-146
• /
• 2019

The aircraft noise analysis area in this study is a training airfield where various kinds of aircraft are operated. It is difficult to identify the noise analysis as a real measurement in a training airfield. In order to overcome these practical limitations and to establish appropriate noise countermeasures, a noise map is prepared using the Integrated Noise Model Version 7.0 of the aircraft noise prediction program used by the FAA. The noise of C90GT aircraft was measured while flying the takeoff route, landing route, and long route. We want to identify areas where noise damage is more than 70 WECPNL. No area exceeding the legal standard of 70 WECPNL was found in all routes.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.361-366
• /
• 2001

A mim turbo-shaft engine of 50HP for UAV, which can be easily modified to turbo-prop and turbo-jet engine by sharing the core engine and has many applications to civilian demands and munitions, will be developed This kind of micro gas turbine engine has been developed mostly by the corporations which have special technology but are small in its scale. Especially, the gas turbine engine can be easily applied to other fields and developed by domestic technology, so that the sharing of technology is planed to realize through the cooperations with academies and research institutes. In this paper, the gas turbine engine, which has the compressor ratio of 3.8, the turbine inlet temperature of l180K and the engine speed higher than 100,000 rpm, is composed of centrifugal compressor, combustor, gas generator turbine, free power turbine and gear box. The competitiveness of the gas turbine engine can be obtained from minimizing its cost by the utilization of domestic infrastructure for the performance test and the decisive outsourcing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.389-392
• /
• 2011

In this study, the engine performance data was extracted and analyzed through the flight test of Smart UAV which is tilt rotor aircraft. The flight test was conducted for the transition flight regime where the tilt angle of prop-rotor varies from 90 degree to 0 degree and vice versa. The engine performance data such as engine power and specific fuel consumption gathered from flight tests were compared well with the results of engine performance analysis program.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.175-182
• /
• 2011

Optimized design was performed for a subsonic aircraft wing. The subsonic aircraft is dual turbo-prop and carrying less than 100 passengers. The cruise speed is Mach 0.6. The design was performed by two stages. The first stage is to decide the height of horizontal tail by analyzing the directional stability with Vorstab and then, the optimized wing configuration was selected with Piano, a optimizer commercially available. Fluent, a commercial CFD software was utilized to predict the aerodynamic performance of the aircraft. Drag of the aircraft was minimized with maintaining constant lift for cruise. The optimization reduced 10 counts from the initial wing configuration.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.594-600
• /
• 1989

항공기용 원동기는 항공기를 추진시키기 위한 동력장치이다. 항공기가 추진력을 얻기 위해서는 프로펠러를 회전시켜 대량의 공기를 뒤로 가속시켜 그 반작용을 이용하는 방법과, 단순히 배기 가스를 뒤로 고속분사시켜 그 반작용을 이용하는 방법이 있다. 피스톤 엔진은 전자를, 터보 제트 엔진은 후자를 대표하고 있는데 두 가지 방법을 절충하여 터빈으로 프로펠러를 회전시키는 터보 프롭엔진과, 헬리콥터의 로우터를 회전시키는 터보 샤프트 엔진도 있다. 또 터보 제트 엔진과 터보 프롭 엔진의 증간성능을 꾀한 터보 팬 엔진이 있는데 효율이 아주 좋기 때문에 급속히 발 전되어 항공기용 원동기의 대명사격으로 현재 군용이나 민간기용으로 널리 사용되고 있다. 최 근에는 터보팬 엔진과 터보 프롭 엔진을 절충한 새로운 터보 프롭 APT (advanced turbo prop) 엔진의 실용화가 추진되고 있다. 이상과 같은 종류의 엔진 이외에도 항공기용 원동기에는 극히 제한된 용도에 쓰이는 램 제트와 펄스 제트 엔진 그리고 로켓 엔진 등이 있다. 원동기는 그 용 도에 따라 개발, 활용되는 것이기 때문에 오랜 역사를 지닌 피스톤 엔진은 아직까지도 경항공 기용 원동기의 주류를 이루고 있고, 앞으로도 터보 프롭 엔진과 더불어 나름대로 계속 활용될 것으로 전망된다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.121-131
• /
• 1999

Automatic Rudder Trim System(ARTS) is a device to reduce the pilot's work load for rudder trimming greatly required in varying abruptly aircraft's engine power. This paper represents a technical analysis and a design of control law of the ARTS. The control law of the ARTS is designed based on the analysis of aircraft's characteristics, system's requirements, and limitations. The control law is comprised of open loop control using the rudder trim map for a specific aircraft and closed loop control to compensate the error of the open loop control system. flight test results show that the ARTS can reduce pilot's work load for rudder trimming dramatically and can compensate the aircraft's transient yaw motion.