• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.501-504
• /
• 2005

This paper discusses the development of drying shrinkage reducing type superplasticizer(DSRS) by varying dosage of polycarboxylic based superplasticizer, liquid type expansive admixture and antifoaming agent. Adequate mixture proportion of each admixture is fixed at 0.3$\%$ of superplasticizer, 0.15$\%$ of liquidtype expansive admixture and 0.0005$\%$ of antifoaming agent to insure the improvement in drying shrinkage as well as comparable to the slump and air content of conventional concrete. With this mixture proportion, compressive strength of concrete using DSRS is comparable to that of conventional concrete. The use of DSRS studied by the authors has a favorable effect on reducing drying shrinkage due to the effect of water content and expansion by expansive admixture.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권2호
• /
• pp.159-167
• /
• 2003

Cracks in reinforced concrete structures reduce overall durability by allowing the penetration of water and aggressive agents, thereby accelerating the deterioration of the reinforcing steel. Highway pavement and bridge decks are especially susceptible to this type of deterioration since these structures exhibit high rates of shrinkage and are frequently exposed to aggressive environmental conditions. The objectives of this investigation included the development of experimental procedures for assessing shrinkage cracking potential of recycled aggregate concrete, the evaluation of mix composition on shrinkage cracking potential, and the development of theoretical models to simulate early-age cracking behavior. Specifically, the influences of shrinkage-reducing admixture(SRA) and recycled aggregate concrete were investigated. The shrinkage-reducing admixture substantially reduces free shrinkage and restrains shrinkage cracking while providing similar mechanical properties. A fracture mechanics modeling approach was developed to predict the behavior of a variety of restrained concrete specimens. This modeling approach was used to successfully explain experimental results from a variety of mixture compositions. The model was used to demonstrate the influence of material and structural properties on the potential for cracking.

• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.233-240
• /
• 2012

하이브리드 SHCC는 마이크로 섬유에 의한 마이크로 균열제어와 매크로 섬유에 의한 매크로 균열제어 성능이 뛰어나 다양한 분야에 적용가능성이 높은 재료로서 활발히 연구되고 있다. 그러나 SHCC는 부배합으로 자기수축에 의한 수축균열을 고려하여야 한다. 따라서 이 연구에서는 PE섬유와 강섬유가 함께 혼입된 팽창형 하이브리드 SHCC의 역학적 특성을 평가하고자 하였다. 하이브리드 SHCC의 역학적 특성을 평가하고자 W/B(45%, 30%, 20%)와 팽창재 대체유무(0%, 10%)를 변수로하였다. 시험은 수축, 압축, 직접인장 및 휨 시험을 수행하였다. 각 실험들을 통한 성능평가결과 10%의 팽창재를 대체한 W/B 30%의 하이브리드 SHCC에서 역학적 성능 개선이 가장 우수하였다.

• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.133-140
• /
• 2004

This study is intended to investigate the properties of bleeding reduction of concrete using AE water reducing agent for the type of bleeding reduction with the replacement admixture. According to the results, when the adding ratio of AE water reducing agent for the type of bleeding reduction increases, a range of normal fluidity and aimed air content are satisfied, setting time is faster than that of normal AE water reducing agent. And bleeding amount decreases, bleeding speed is highest between 60 and 90 min, and sinking depth increases drastically in 50 min. When AE oater reducing agent for the type of bleeding reduction is added, compressive strength shows a slight variation by air content, but there is not a large influence by addition of AE water reducing agent for the type of bleeding reduction. Synthetically, it proves that AE water reducing agent for the type of bleeding reduction satisfies aimed air content in the range of normal slump and can reduce only bleeding without quality variation of compressive strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.215-218
• /
• 2005

This paper intended to evaluate the applicability of drying shrinkage reducing superplasticizer (DSRA) by investigating physical properties of concrete using DSRA, The application of flowing concrete method exhibited a less loss of slump and air content with time than those of conventional concrete and had small bleeding. Flowing concrete had larger compressive strength than base and conventional concrete by as much as $3\~5\%$. It also had less drying shrinkage by as much as $20\%$ compared with conventional concrete. This is due to the coupled effect of reduced water content and aqueous type expansive admixture. On the other hand, neutralization depth of flowing concrete showed greater than conventional concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.431-436
• /
• 2002

In this paper, to seek a solution of reducing autogenous shrinkage three types of bar restricted concrete specimens which have similar compressive strength were tested. The three type of concrete were plain concrete-P25 type, $10^{\circ}C$ fly-ash replaced concrete-F10 type, and $1^{\circ}C$ expansion admixture replaced concrete-SP1 type, and with the test result an experimental study was conducted to gain the tensile stress of concrete. From the result of P25, SP1, F10 tests, it was found that by the age of 14 the ratios of tensile stress to tensile strength of three specimens are $75^{\circ}C$, $47^{\circ}C$, $52^{\circ}C$ respectively. so we came to a conclusion that the SP1-type concrete has better capacity to reduce autogenous shrinkage than F10-type concrete at similar compressive strength condition.

• 한국건설순환자원학회지
• /
• 제9권2호
• /
• pp.38-45
• /
• 2014

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.921-924
• /
• 2000

The purpose of this paper is to investigate the effects of admixture such as AE water reducing agent and Flyash on properties of cement mortar for floor. As for the effects of AE water reducing agent kinds, fluidity and air content increase in order for melamine type, lignine type and naphtalene type. As Flyash contents increase, fluidity shows high, but air content shows decline tendency. compressive strength according to AE water reducing agent kinds increase in order for melamine type, lignine type and naphtalene type. As AE water reducing agent content increases, it shows to be decreased. As for the effects of Flyash, it retards at early age but at later age it gains high with increase of Flyash contents due to pozzanic reaction. Drying shrinkage shows to be docreased slightly with increase of AE water reducing agent.

• 콘크리트학회논문집
• /
• 제16권6호
• /
• pp.805-811
• /
• 2004

본 연구는 배합 및 재료요인에 따른 저수축 고성능 콘크리트의 기초적 특성 및 건조 자기수축 등 품질 특성에 대하여 검토한 것이다. 실험결과 고성능 콘크리트의 기초적 물성으로 배합요인에 따른 유동성은 W/B 및 단위수량이 작을수록 크게 감소하였고, 공기량은 W/B 변화에 따라 큰 차이가 없었으나, 단위수량 증가에 따라서는 증가하였다. 또한, 압축강도는 W/B가 클수록 크게 나타났고, 단위수량 변화에 따라서는 큰 차이가 없는 것으로 나타났다. 재료요인에 따른 유동성은 시멘트의 경우 LPC가 OPC보다 작게 나타났고 SP제는 PS, NS, MS의 순으로 크게 나타났으며, 공기량은 OPC가 LPC보다 많게 나타났고, SP제는 MS PS NS의 순으로 크게 나타났다. 또한, 압축강도는 LPC가 OPC보다 초기재령에서는 작게 나타났지만, 91일 이후에는 유사하게 나타났고, SP제 종류에 따라서는 큰 차이가 없는 것으로 나타났다. 건조 및 자기수축은 배합요인에서 W/B가 클수록 단위수량이 작을수록 작게 나타났다. 단, W/B $35\%$ 및 단위수량 $145 kg/m^3$에서는 재령 49일까지 자기수축이 발생하지 않았는데, 이는 팽창재와 수축저감제의 중첩효과에 의해 자기수축이 상쇄된 것으로 분석된다. 재료요인에서 시멘트는 LPC가 OPC보다 작게 나타났고 SP제의 종류는 큰 차이가 없는 것으로 나타났다. 따라서, FA, SF, EA, SR를 혼입한 저수축 고성능 콘크리트에서 W/B는 가능한 범위내에서 크게, 단위수량은 적게 되도록 배합설계 하곤 시멘트는 IPC, SP제는 MS를 사용할 때 수축특성이 우수해짐을 알 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.120-121
• /
• 2017

Generally, slump of plain concrete slab is about 120~150mm and slump loss is easy to occur. So, water is added to concrete because this method is convenient for Placing. In order to solve this problem, performance evaluation of concrete using improvement type PC admixture was carried out. Target slump is 210mm and compressive strength is 18MPa. As a result, slump reference value was satisfied 60 minutes after placing and 7-day compressive strength was 21~25MPa.