• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1301-1307
• /
• 2008

In this paper, we developed UHF RFID R/W system using AT91SAM7S256(ARM chip), UHF RFID R/W module (WJ7090) and wireless LAN(IEEE 802.11.a/b). And we developed a transmission/receiving packet which is send to UHF R/W module in AT91SAM7S256. In order to show the usefulness of UHF RFID R/W system, we executed a performance test. The developed UHF RFID R/W system shows better performance for reading of RFID tag and data transmission through wireless LAN.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.9
• /
• pp.450-455
• /
• 2001

We proposed a new sensitivity verification method for the UHF partial discharge(PD) detection system. Initially, we measure the UHF power induced by 5 pC PD which takes place near UHF sensor. Subsequently, we inject the swept UHF signal from a network analyzer into the GIS and measure the attenuation of the signal along the 71S Both the UHF power by 5 pC PD and the attenuation make it possible to verify the sensitivity and spatial coverage of the PD detection system. This method doesn\`t require the calibration of injected pulse type UHF signal into the GIS and makes us precisely measure the attenuation in frequency domain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.972-977
• /
• 2016

This paper introduces development process and results of HF & UHF band(13.56 MHz, 920 MHz) tag antennas using a single-side printing method on a PE film. The size of tag antenna is designed in the area of $80mm{\times}50mm$, little bit smaller than a credit card. The UHF tag antenna, $76mm{\times}44mm$, is located at the outside of the card size tag antenna, and the HF tag antenna, $40 mm{\times}42 mm$, is located at the center of the UHF tag antenna. The UHF and HF tag antennas are designed with consideration of coupling effects. The single-side printing method with a jumper structure without using a via is used to make a loop antenna of HF tag antenna. The reading range of UHF tag antenna is about 6m, and the reading of HF tag antenna is about 5 cm. The designed tag antennas have long enough reading ranges for both bands. The tag is applicable to logistics and authentification.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.112-117
• /
• 2004

This paper describes the analysis of the UHF signal characteristics due to the partial discharge sources which can exist in a GIS. For the experiment, a model GIS was made and 5 types of discharge source were created as follows; corona discharge, surface discharge, void discharge, discharge due to free particle, discharge from floating electrode. The frequency spectra and the phase characteristics of UHF signals were induced by UHF signal analysis. The results were quantified to systematically adapt to analyze the PD sources in the GIS and utilized as algorithm data based on the neural network for Back-Propagation Algorithm with a multi-layer structure. The perception rate of the constructed algorithm showed approximately 94[%] and 82[%] in learning and testing data, respectively.

• Journal of the Korean Society for information Management
• /
• v.26 no.3
• /
• pp.335-353
• /
• 2009

Since libraries first used RFID systems in the late 1990's, there is growing debate about the advantages and disadvantages of HF and UHF RFID systems. This study tries to explore practical issues in HF and UHF RFID systems especially in the areas of system characteristics and advantages and disadvantages affecting technology implementation to libraries. This study investigates the current status of RFID systems in Korean libraries, and analyzes the best practices of four libraries(two libraries in HF and two libraries in UHF respectively). Also, this study describes functional characteristics of HF and UHF RFID systems, debates on frequencies in ISO/DIS 28560, and the opinions of both manufacturers which provide RFID systems to libraries and librarians who use HF and UHF RFID systems in their libraries.

• Korean Journal of Mathematics
• /
• v.8 no.2
• /
• pp.155-162
• /
• 2000

For a sequence $\{{\eta}_m\}_m$ of unit vectors in $\mathbb{C}^n$, we consider the associated linear functional ${\omega}$ on the Cuntz algebra $\mathcal{O}_n$. We show that the restriction ${\omega}{\mid}_{UHF_n}$ is the product pure state of a subalgebra $UHF_n$ of $\mathcal{O}_n$ such that ${\omega}{\mid}_{UHF_n}={\otimes}{\omega}_m$ with ${\omega}_m({\cdot})$ < ${\cdot}{\eta}_m,{\eta}_m$ >. We study product pure states of UHF and obtain a concrete description of them in terms of unit vectors. We also study states of $UHF_n$ which is the restriction of the linear functionals on $O_n$ associated to a fixed unit vector in $\mathbb{C}^n$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1225-1229
• /
• 2014

This paper introduces a development of the auto sushi conveyer-belt payment system using UHF RFID dishes. In a sushi bar, instead of counting the number of the finished sushi dishes, sushi dishes with the UHF RFID have been used in the auto payment system to have accuracy and convenience. To recognize each dish, the UHF RFID tag has been designed, and auto-payment system has been developed. The UHF RFID tag under the dish has been recognized by an RFID reader, and the auto RFID payment system shows the total price of the finished dishes based on the color and number of dishes automatically. The performance of the developed UHF RFID tag and auto RFID payment system have been measured and verified.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.47-52
• /
• 2008

In this paper partial discharge were simulated by conducted particle, a fine protrusion, surface discharge, which could be easy accumulated charge and concentrated electric field in the model GIS. In this times this paper measured and analyzed the radiated electromagnetic waves by using spectrum analyzer and antenna ($30{\sim}2,000[MHz]$ for measurement of EMI EMC in accordance with occurrence and propagation of partial discharge. In the basis of this results, a novel UHF(Ultra High Frequency) spherical sensor is presented. The measured impedance bandwidth of the proposed antenna is from 0.3[GHz] to 1.7[GHz]. Form results of this study, this antenna will be playing an important role for the sensor for insulation diagnosis system by UHF method of real site GIS and power equipment using $SF_6$ gas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.34-37
• /
• 2012

The paper introduces the an necklace type UHF RFID tag for a live tree having high dielectric constant. When a general UHF RFID tag is used for the metal and the material with high dielectric constant, the electrical characteristics and impedance of antenna have been changed, and the tag is not recognized by an UHF RFID reader. The necklace type UHF RFID tag has been designed with consideration of the high dielectric constant of the tree material. The name tag for a live tree has been designed with the developed tag antenna. The performance of tag has been measured and the reading range is about 4~5m. The developed UHF RFID tag antenna can be applied to any high dielectric material for various industrial applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.93-98
• /
• 2018

This paper introduces the development of HF(NFC) and UHF band(13.56 MHz, 920 MHz) tag antennas, imbedded in a box. In dual band antennas, the HF band tag can be used to inspect the box using NFC, and the UHF band tag can be used for logistics. The dielectric constant of the box material is measured and used for simulation. The Ntag213 chip manufactured by NXP is used in HF loop antennas, since NFC is possible with Ntag213. For the UHF band, the Higgs-3 chip manufactured by Alien is used. The HF tag antenna is located at the center of the UHF tag antenna, and the location of the HF tag antenna is calculated while considering coupling effects. The designed tag can be used by both the bands for the purposes of logistics and authentication.