• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제37권1C호
• /
• pp.34-37
• /
• 2012

The paper introduces the an necklace type UHF RFID tag for a live tree having high dielectric constant. When a general UHF RFID tag is used for the metal and the material with high dielectric constant, the electrical characteristics and impedance of antenna have been changed, and the tag is not recognized by an UHF RFID reader. The necklace type UHF RFID tag has been designed with consideration of the high dielectric constant of the tree material. The name tag for a live tree has been designed with the developed tag antenna. The performance of tag has been measured and the reading range is about 4~5m. The developed UHF RFID tag antenna can be applied to any high dielectric material for various industrial applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제37권2C호
• /
• pp.168-172
• /
• 2012

An UHF RFID tag is designed and fabricated using the national code in a bar-code with conductive ink. The bar-code sample was taken from a general bar-code from a general box. The conductivity of the conductive ink was measured, and the measured conductivity was used for the simulation tool to design the printed bar-code shape tag antenna. The tag antenna was fabricated using T-matching to reduce the size of the tag, and the bar-code tag antenna is recognized by both a general bar-code reader and an UHF RFID reader. The input reflection coefficient characteristic, the reading range pattern and the reading rate of the tag antenna are measured.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제27권11호
• /
• pp.972-977
• /
• 2016

This paper introduces development process and results of HF & UHF band(13.56 MHz, 920 MHz) tag antennas using a single-side printing method on a PE film. The size of tag antenna is designed in the area of $80mm{\times}50mm$, little bit smaller than a credit card. The UHF tag antenna, $76mm{\times}44mm$, is located at the outside of the card size tag antenna, and the HF tag antenna, $40 mm{\times}42 mm$, is located at the center of the UHF tag antenna. The UHF and HF tag antennas are designed with consideration of coupling effects. The single-side printing method with a jumper structure without using a via is used to make a loop antenna of HF tag antenna. The reading range of UHF tag antenna is about 6m, and the reading of HF tag antenna is about 5 cm. The designed tag antennas have long enough reading ranges for both bands. The tag is applicable to logistics and authentification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제37C권10호
• /
• pp.909-914
• /
• 2012

The paper introduces the RFID location based Tree Management System (TMS) using UHF RFID tag and GPS. The bolt shape tag has been developed since the wood material has high dielectric constant. Since the characteristics and impedance of tag antenna can be changed by the material next to the tag, the plastic bolt shape tag antenna has to be carefully designed with consideration of the high dielectric constant of the wood material. The RFID TMS system has been utilized with the bolt shape tag antenna and GPS. The TMS system uses and links Google map to locate the location of the trees. Therefore, this system allow us to manage the trees economically and efficiently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제30권3호
• /
• pp.209-214
• /
• 2019

This paper presents the design of a 920 MHz ultra-high frequency(UHF) band radio frequency identification(RFID) conductive fabric tag antenna. The resistance values of four different conductive fabrics are measured, and the conductivities of the fabrics are calculated. The fabric with the best conductivity is selected, and the best conductivity of the fabric is used to simulate the fabric tag antenna design. The fabric UHF RFID tag antenna with a T-Matching structure and name-tag size of $80{\times}40mm$ is simulated and designed. The simulated and measured results are compared, and a laundry test is performed. The reading range of the fabric tag antenna is about 2 m. This fabric tag can be easily applied to an entrance control system as it can be attached to other fabrics and cloths.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제23권1호
• /
• pp.131-134
• /
• 2012

A bar-code shape UHF RFID tag antenna is designed and fabricated with silver conductive ink. It can be recognize by both bar-code scanner and RFID reader. The bar-code shape is taken from a general box of a product, and the product code of the bar-code is used for the antenna design. The tag antenna is fabricated with silver conductive ink using a T-matching structure. The designed tag antenna is satisfied with bar-code system and RFID system simultaneously. The input reflection coefficient characteristics and the reading range pattern are measured. The peak reading range is about 111 cm, which is long enough.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제23권2호
• /
• pp.270-273
• /
• 2012

A plastic bolt shape UHF RFID tag has been developed for a live tree. The UHF tag is designed and installed into the head part of the bolt, inserted into a tree for management of tree. If the tag antenna is installed near the high dielectric constant material, the impedance of the tag antenna will be changed, and the tag does not work. Therefore, the dielectric constants of wood and plastic bolt are considered for tag antenna design. The input reflection coefficient characteristics and the reading range patterns are measured and compared. This UHF RFID tag can be applied into a live tree, and the status and location of tree can be controlled with the RFID tag. This developed UHF tag can be applied to any applications and objects using a bolt.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.121-126
• /
• 2010

A long range UHF RFID tag with a rectangular metallic cavity structure is proposed for various applications with metallic objects. The proposed tag consists of a rectangular metallic cavity structure and a folded dipole antenna which is located on top of the cavity. The tag is designed for Korean UHF RFID band(910~914 MHz) and the bandwidth, which satisfies the -10 dB input reflection coefficient requirement, is approximately 1.3 %(904~916 MHz). Measurement demonstrates that the proposed tag shows long reading range up to 15 m when it is placed on a metallic plate.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제9권2호
• /
• pp.249-254
• /
• 2014

We have studied on the possibility of railway stability system using RFID tag. UHF RFID tag was desinged, manufactured and tested. Proposed UHF tag antenna has PIFA type structure and inset feed multi matching technique was attempted for impedance matching of antenna. The impedance bandwidth (VSWR < 3) of the proposed tag antenna covers 917~923 MHz. Measured peak gain is 3.225 dBi and UHF band with an omni-directional radiation pattern. RFID reader and tag installed in motor car and track, respectively. Then, tag recognition rate according to velocity of car (under 45 km/h) represented 100 %.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제18권3호
• /
• pp.282-287
• /
• 2007

A circular UHF RFID tag has been designed. This circular tag antenna can be optimized simply by controling two parameters, outer radius and inner radius of the tag antenna. The resistance and resistance values of the tag antenna have been researched based on the variation of inner and outer radii of the circular tag antenna. The simulation and measurement results are compared.