• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.259-266
• /
• 2021

USB bus not only works with convenience but also transmits data fast and becomes a standard peripheral interface between FPGA development board and personal computer. In this paper FPGA verification system with slave FIFO interface for Cypress FX3 USB 3 bridge chip was implemented. The designed slave FIFO interface consists of host interface module based on FIFO structure, master bus controller and command decoder and supports streaming communication interface for FX3 bridge chip and memory-mapped input and output interface for user design circuit. The ZestSC3 board with Cypress FX3 USB 3 bridge chip and Xilinx Artix FPGA(XC7A35T-1C5G3241) was used to implement FPGA verification system. It was verified that the FPGA verification system for user design circuit operated correctly under various clock frequencies using GUI software developed by visual C# and C++ DLL. The designed slave FIFO interface for FPGA verification system has modular structure and can be applicable to the different user designs with memory-mapped I/O interface.

• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.153-158
• /
• 2010

Most of software developers use the GNU Debugger (GDB) in order to debug code execution. The GDB supports a remote debugging environment through serial communication. However, in embedded systems, the speed is limited in the serial communication. Due to this reason, the serial communication is rarely used for the debugging purpose. To solve this problem, many embedded systems adapt the JTAG and the USB interface. This paper proposes debugging environment via USB-JTAG interface to debug the EISC processor, and introduces how the USB interface works on the GDB and how the JTAG module handles debugging packets.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.53-60
• /
• 2002

This paper describes a Gray Mode Graphic STN LCD drive circuit using USB interface. The drive circuit using USB interface can highly transfer image data created under PC t LCD. Hence, the LCD drive circuit doesn't use microprocessor for the convenience of users. The proposed LCD drive circuit part have been verified by simulation and by ALTERA EPF10K10TC144-3 FPGA implementation in VHDL. The USB interface part have been programmed in MS-Visual C++ 6.0. The validity and efficiency of the proposed LCD drive circuit have been verified by test board. After comparing this LCD drive circuit to specify it was verified that the developed LCD drive circuit showed good performances, such as convenience of users, low cost.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.295-300
• /
• 2007

The Linux-based embedded systems such as mobile telephones. PDAs and MP3 players are widely in use. USB(Universal Serial Bus) is the interface for data communication between the computers and these peripheral devices. Some embedded systems like intelligent home networking and multimedia streaming require guaranteed QoS(Quality of Service), which is needed for real time transmission of UDP/IP messages through USB. Although USB Ethernet driver is supported by USB Gadget API in Linux, it is unable to provide the desirable QoS required by each type or small embedded systems due to the unpredictability or TCP/IP Stack in Linux. This paper proposes IP-Over-USB to improve QoS of UDP/IP message transmission in the embedded systems using USB in Linux system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1181-1186
• /
• 2002

This system is controlled by PC application programs through USB interface. PC application programs make image files, user's files , sound files and option files. And these files are downloaded to external memory card of this system. The other PC application programs monitor status of DARC, GPS, LED module of this system. The PC application programs help user manage this system efficiently.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1020-1026
• /
• 2005

In the era of ubiquitous computing, human-friendly man-machine interface is getting more attention due to its possibility to offer convenient services. For this, in this paper, we introduce a 'Half-Mirror Interface System (HMIS)' as a novel type of human-friendly man-machine interfaces. Basically, HMIS consists of half-mirror, USB-Webcam, microphone, 2ch-speaker, and high-speed processing unit. In our HMIS, two principal operation modes are selected by the existence of the user in front of it. The first one, 'mirror-mode', is activated when the user's face is detected via USB-Webcam. In this mode, HMIS provides three basic functions such as 1) make-up assistance by magnifying an interested facial component and TTS (Text-To-Speech) guide for appropriate make-up, 2) Daily weather information provider via WWW service, 3) Health monitoring/diagnosis service using Chinese medicine knowledge. The second one, 'display-mode' is designed to show decorative pictures, family photos, art paintings and so on. This mode is activated when the user's face is not detected for a time being. In display-mode, we also added a 'healing-window' function and 'healing-music player' function for user's psychological comfort and/or relaxation. All these functions are accessible by commercially available voice synthesis/recognition package.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.464-474
• /
• 2004

This paper proposes a middleware structure for the module-based personal robot, which can run on heterogeneous network interfaces and provides users easy interface-method regardless of underlying heterogeneous interfaces and convenient exchange of modules. The proposed middleware is divided into three layers of a streaming layer (SL), a network adaptation layer (NAL) and a network interface layer (NIL). The streaming layer manages application transactions using middleware services and provides user a uniform interfaces to the proposed middleware. The network adaptation layer manages a message-routing and provides naming service and it is a core of the proposed middleware. And the network interfaces layer manages dependent parts of heterogeneous network interfaces such as IEEE1394, USB, Ethernet, and CAN (Control Area Network). This paper implements the proposed middleware structure, where 3 types of interfaces of IEEE 1394, USB and Ethernet are used, and measures response times among those interfaces.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.251-257
• /
• 2010

This paper reports a noble instrument that helps physically disabled people to access computers. There have been numerous attempts to develop such a methodology, but most of them require an additional space for workstation often including access program installation. The additional space also needs to be carefully designed to consider each specific disabled area. This study aims to develop a system that removes the spacial limitation by putting the integrated computer interface using the wheelchair controller. The implementation of the computer workstation is performed by utilizing an USB interface. The developed equipment will take an important role to support various social lives for the users and eventually to improve their quality of life.

• Journal of Internet of Things and Convergence
• /
• v.8 no.3
• /
• pp.63-68
• /
• 2022

Due to COVID-19, many paradigm shifts in existing manufacturing facilities and the expansion of non-face-to-face services are accelerating worldwide. A representative technology is digital twin technology. Such digital twin technology, which existed only conceptually in the past, has recently become feasible with the construction of a 5G-based network. Accordingly, this paper designed and implemented a part of the USB process to enable digital twins based on OPC UA communication, which is a standard interlocking structure, between real object objects and virtual reality-based USB process in accordance with this paradigm change. By reflecting the physical characteristics of real objects together, it is possible to simulate real-time synchronization of these with real objects. In the future, this can be applied to various industrial fields, and it is expected that it will be possible to reduce costs for decision-making and prevent dangerous accidents.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.201-208
• /
• 2013

In this paper, we studied on improvement for radiated EMI of USB power line of cable. it is made by using wireless video access point system for confirming the phenomenon of radiated EMI from cable. then, we make sure that the limit exceed through the initial measurement of radiated EMI limit criteria in comparison to about 3 [dBuV/m]~15 [dBuV/m]. after that we confirmed the resonance in power line of cable through measurement of s-parameters. so, we confirmed the relation radiated EMI and power line of cable resonance and we reduced radiated EMI in power line of cable through a capacitor and low pass-band filter using the technique of power networks management. in conclusion, we suggested how to reduce power line of cable resonance applied for the improved method. and we confirmed that suggested reduction method is suitable through testing radiated EMI. the result of radiated EMI reduction limit criteria 40[dBuV/m]~47[dBuV/m] in comparison to about 3 [dBuV/m]~20 [dBuV/m].