• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.2071-2078
• /
• 2009

In this paper, we proposed a non-contact respiration measurement system with ultrasonic proximity sensor. Ultrasonic proximity sensor approach of respiration measurement which respiration signatures and rates can be derived in real-time for long-term monitoring is presented. 240 kHz ultrasonic sensor has been applied for the proposed measurement system. The time of flight of sound wave between the transmitted signal and received signal have been used for a respiration measurement from abdominal area. Respiration rates measured with the ultrasonic proximity sensor were compared with those measured with standard techniques on 5 human subjects. Accurate measurement of respiration rate is shown from the 50 cm measurement distance. The data from the method comparison study is used to confirm the performance of the proposed measurement system. The current version of respiratory rate detection system using ultrasonic can successfully measure respiration rate. The proposed measurement method could be used for monitoring unconscious persons from a relatively close range, avoiding the need to apply electrodes or other sensors in the correct position and to wire the subject to the monitor. Monitoring respiration using ultrasonic sensor offers a promising possibility of non-contact measurement of respiration rates. Especially, this technology offers a potentially inexpensive implementation that could extend applications to consumer home-healthcare and mobile-healthcare products. Further advances in the sensor design, system design and signal processing can increase the range of the measurement and quality of the rate-finding for broadening the potential application areas of this technology.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.310-316
• /
• 2017

The robot proximity and tactile sensors can be categorized into two groups: grip sensors and safety sensors. They have different performance requirements. The safety sensor should have long proximity range and fast response in order to secure enough response time before colliding with ambient objects. As for the tactile sensing function, the safety sensor need to be fast and compliant to mitigate the impact from a collision. In order to meet these requirements, we proposed and demonstrated a compliant integrated safety sensor suitable to human-friendly robots. An ultrasonic proximity sensor and a piezoelectric tactile sensor made of PVDF films have been integrated in a compliant PDMS structure. The implemented sensor demonstrated the maximum proximity range of 35 cm. The directional tolerance for 30 cm detection range was about ${\pm}15^{\circ}$ from the normal axis. The integrated PVDF tactile sensor was able to detect various impacts of up to 20 N in a controlled experimental setup.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.971-975
• /
• 2005

In this study, a car-door-controlled collision protection system using proximity sensor is proposed and its preliminary analysis and several preliminary experiments are conducted. The proposed system has three additional sub-components on the car-door that is, a pair of extra electro-magnetic actuator that are attached to the sliding bar of the open/close car-door four-bar mechanism, a proximity sensor that would be attached to the outside surface of the door which is likely to frequently contact to the object and a driving control circuit of the whole system. A proximity sensor is used to detect object close to the car-door, the driving control circuit provides actuating power command to the electro-magnets to generate braking force to stop the swing motion of the car-door. It is verified through kinematic analysis of the four-bar car-door open/close mechanism and through experiments that the magnitude of maximum electronic magnetic force could provide the braking force enough for this application. For this purpose, an electro-magnet driving circuit is implemented and tested. And also to increase the safety of the system a time delay circuit is implemented and tested.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.101-106
• /
• 2018

Most people with visual impairments can not use both hands freely because they carry a cane. And unnecessary contact with people around you during walking can occur. Other guides include guide dogs, but the price and maintenance cost are expensive and difficult to manage. In this paper, we propose a smart glove, which prevents unnecessary contact when blind people use the cane, detects the obstacle ahead by using the ultrasonic sensor, and informs the presence of the obstacle by using the servo motor. In addition, the electrostatic proximity touch module on the fingers executes a specific application of the smart phone connected by Bluetooth when the finger touches each other. It is designed to allow you to use text or phone calls when you are lost or in an emergency. The results of this study will be used as a tool to provide a more convenient life for the visually impaired.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1921-1926
• /
• 2003

We build a local minimum free motion planning for mobile robots considering dynamic environments by simple sensor fusion assuming that there are unknown obstacles which can be detected only partially at a time by proximity sensors and can be cleaned up or moved slowly (dynamic environments). Potential field is used as a basic platform for the motion planning. To clear local minimum problem, the partial information on the obstacles should be memorized and integrated effectively. Sets of linked line segments (SLLS) are proposed as the integration method. Then robot's target point is replaced by virtual target considering the integrated sensing information. As for the main proximity sensors, we use laser slit emission and simple web camera since the system gives more continuous data information. Also, we use ultrasonic sensors as the auxiliary sensors for simple sensor fusion considering the advantages in that they give exact information about the presence of any obstacle within certain range. By using this sensor fusion, the dynamic environments can be dealt easily. The performance of our algorithm is validated via simulations and experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.209-219
• /
• 1999

이상적인 초음파 물체 감지 센서는 감지거리가 길고, 고해상도와 작은 크기이어야 한다. 그러나 현재 공기 중에 사용되고 있는 선형 초음파센서로는 공기의 높은 음흡수 때문에 이 세 가지 조건을 동시에 만족하기는 어렵다. 본 논문은 서로 다른 주파수성분의 두 음파의 비선형 상호작용으로 생성되는 두 주파수 차이에 상당하는 주파수의 음파를 이용한 물체감지 비선형적 초음파 감지센서에 관한 연구이다. 링-디스크 두 요소로 구성된 비선형적 초음파센서에 의해 형성되는 음장을 예측할 수 있는 컴퓨터 프로그램을 개발하였으며, 이 프로그램을 이용하여 비선형적 초음파센서의 최적 형태와 주파수를 결정하고, 선형 초음파센서와 세 조건 측면에서 비교 검토하였다. 비교 결과 비선형적 초음파센서가 해상도측면에서 유리하고, 75 dB이하의 초음파 소음환경에서 사용할 때 감지거리면에서 유리하다.