• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.8
• /
• pp.2552-2570
• /
• 2022

Underwater images usually have various problems, such as the color cast of underwater images due to the attenuation of different lights in water, the darkness of image caused by the lack of light underwater, and the haze effect of underwater images because of the scattering of light. To address the above problems, the channel attention mechanism, strengthen-operate-subtract (SOS) boosting mechanism and gated fusion module are introduced in our paper, based on which, an underwater image recovery network is proposed. First, for the color cast problem of underwater images, the channel attention mechanism is incorporated in our model, which can well alleviate the color cast of underwater images. Second, as for the darkness of underwater images, the similarity between the target underwater image after dehazing and color correcting, and the image output by our model is used as the loss function, so as to increase the brightness of the underwater image. Finally, we employ the SOS boosting module to eliminate the haze effect of underwater images. Moreover, experiments were carried out to evaluate the performance of our model. The qualitative analysis results show that our method can be applied to effectively recover the underwater images, which outperformed most methods for comparison according to various criteria in the quantitative analysis.

• Journal of Korea Multimedia Society
• /
• v.22 no.11
• /
• pp.1259-1268
• /
• 2019

Recently, Communication media have been developed for the underwater communication in underwater environments where the underwater communication failures occur frequently. Although the underwater communication by one medium is not stable due to the influence of the underwater environment, the use of various communication media can complement each other and so this makes the underwater communication more stable. For this reason, this paper proposes approaches to the design and implementation of integrated MAC for complementing individual unstable underwater communications. In addition this paper presents the comparison and analysis on each of the proposed approaches so to be able to provide guidelines to designers and implementers of integrated MAC.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1526-1537
• /
• 2021

Due to the difference between the underwater communication environment and the terrestrial communication environment, the radio communication mainly used on the ground cannot be used in underwater. For this reason, in the underwater communication environment, various communication media such as acoustic waves, infrared rays, light and so on has been studied, but there exist several difficulties in operating them individually due to their physical limitations. The concept for overcoming these difficulties is the very underwater multi-media communication, a method to select a communication medium best suitable for the current underwater environment among underwater communication multimedia whenever there occurs underwater communication failure. In this paper, we present an underwater multi-media communication network based on star topology and a fragmentation and reassembly technique to solve the problems caused by the different MTU (Maximum Transmission Unit) sizes among different underwater communication media. We also present the estimations and analysis on processing times in each of fragmentation and reassembly and the total data amount for transmitting fragments in our proposed underwater multi-media communication network.

• Journal of Korea Multimedia Society
• /
• v.23 no.7
• /
• pp.819-829
• /
• 2020

Underwater communication is necessarily useful for various application domains such as saving of human lives from underwater disasters, marine resource exploration, underwater military fields, underwater environment or ecosystem monitoring, fish farm monitoring and management, etc. Even though the acoustic wave has been the main underwater communication media until now, several media such as optical waves, VLF/ELF waves, magnetic fields, and infrared rays also began to be treated as possible media for underwater communication. If these underwater communicate-possible media are used mixing together, the underwater communication can be much more reliable and efficient through complementing the disadvantages of each communication media with advantages of other communication media. In fact, mixing and using multi-media for underwater communication requires the data flow control in the connection process of different media due to their communication speed gaps and bandwidth differences, and, specially, in the flow control, the appropriate message fragmentation technique is required inevitably. For this reason, this paper presents a fragmentation framework and technique necessary to the flow control in the underwater multi-media communication. In addition, through its implementation and experiments, this paper shows the feasibility on the realization of the multi-media based underwater communication.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.1
• /
• pp.32-40
• /
• 2022

Underwater optical images face various limitations that degrade the image quality compared with optical images taken in our atmosphere. Attenuation according to the wavelength of light and reflection by very small floating objects cause low contrast, blurry clarity, and color degradation in underwater images. We constructed an image data of the Korean sea and enhanced it by learning the characteristics of underwater images using the deep learning techniques of CycleGAN (cycle-consistent adversarial network), UGAN (underwater GAN), FUnIE-GAN (fast underwater image enhancement GAN). In addition, the underwater optical image was enhanced using the image processing technique of Image Fusion. For a quantitative performance comparison, UIQM (underwater image quality measure), which evaluates the performance of the enhancement in terms of colorfulness, sharpness, and contrast, and UCIQE (underwater color image quality evaluation), which evaluates the performance in terms of chroma, luminance, and saturation were calculated. For 100 underwater images taken in Korean seas, the average UIQMs of CycleGAN, UGAN, and FUnIE-GAN were 3.91, 3.42, and 2.66, respectively, and the average UCIQEs were measured to be 29.9, 26.77, and 22.88, respectively. The average UIQM and UCIQE of Image Fusion were 3.63 and 23.59, respectively. CycleGAN and UGAN qualitatively and quantitatively improved the image quality in various underwater environments, and FUnIE-GAN had performance differences depending on the underwater environment. Image Fusion showed good performance in terms of color correction and sharpness enhancement. It is expected that this method can be used for monitoring underwater works and the autonomous operation of unmanned vehicles by improving the visibility of underwater situations more accurately.

• Explosives and Blasting
• /
• v.36 no.2
• /
• pp.27-35
• /
• 2018

This study introduces a suggested underwater blasting method in contrast with conventional underwater blasting methods which adopt the drilling and charging procedures by divers. A structural underwater charging system makes it possible to drill into underwater bedrock and charge explosives on the deck of barge ship. The applicability and effectiveness of the suggested method was experimentally approved by comparing with a kind of underwater charging system as a conventional underwater blasting method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.11 s.116
• /
• pp.1108-1114
• /
• 2006

Underwater acoustic transducers can be exposed to a underwater explosive shock caused by various types of underwater weapon. So, a robust anti-shock design is required for transducers to endure the underwater explosive shock. To check the anti-shock characteristics of a transducer, underwater explosive shock test is needed. The conditions of underwater explosive shock test are set up referring to various oversea explosive shock test specifications, and the explosive shock pressure values are calculated according to those conditions. Transient analyses art: carried out for two kinds of underwater acoustic transducer model to verify the anti-shock characteristics. The applied model has robust anti-shock characteristics enough to endure the explosive shock up to 2300 psi. In the future, the transducer design should be certified through the fields test, and modified if needed.

• Journal of the Korea Concrete Institute
• /
• v.12 no.5
• /
• pp.25-34
• /
• 2000

When concrete is placed underwater, it is diluted with separating cementitious material and as a result the quality of concrete becomes poor. To solve this problem, antiwashout underwater concrete is increasingly used for the construction and repair of the concrete structure underwater. The objective of this study is to investigate the characteristics of antiwashout underwater concrete as to the mix proportion, casting and curing water through experimental researches. The unit weight of water and cement, water-cement ratio, fine aggregate ratio, unit weight of antiwashout underwater agent and superplasticizer, and casting and curing water were chosen to measure the suspended solids, pH, air contents, slump flow, unit weight of hardened concrete, and compressive strength. From this study, the incremental modulus at mix proportion design and unit weight of antiwashout underwater agent were increased more than fresh water, and it is a optimum mix proportion that the unit weight of water(and cement) is 230kg/$\textrm{m}^3$(460kg/$\textrm{m}^3$), waterOcement ratio is 50%, fine aggregate ratio is 40%, unit weight of antiwashout underwater agent is 1.2% of water contents per unit weight of concrete, and unit weight of supeplasticizer is 2.5% of cement contents per unit weight of concrete when the antiwashout underwater concrete is used for the underwater work of ocean.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.226-234
• /
• 2016

In this study, a model-referenced underwater navigation algorithm is proposed for high-precise underwater navigation using monocular vision near underwater structures. The main idea of this navigation algorithm is that a 3D model-based pose estimation is combined with the inertial navigation using an extended Kalman filter (EKF). The spatial information obtained from the navigation algorithm is utilized for enabling the underwater robot to navigate near underwater structures whose geometric models are known a priori. For investigating the performance of the proposed approach the model-referenced navigation algorithm was applied to an underwater robot and a set of experiments was carried out in a water tank.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.318-328
• /
• 2018

Disk type underwater gliders are a new type of underwater gliders and they could glide in various directions by adjusting the internal structures, making a turnaround like conventional gliders unnecessary. This characteristic of disk type underwater gliders makes them have great potential application in virtual mooring. Considering dynamic models of conventional underwater gliders could not adequately satisfy the motion characteristic of disk type underwater gliders, a nonlinear dynamic model for the motion simulation of disk type underwater glider is developed in this paper. In the model, the effect of internal masses movement is taken into consideration and a viscous hydrodynamic calculation method satisfying the motion characteristic of disk type underwater gliders is proposed. Through simulating typical motions of a disk type underwater glider, the feasibility of the dynamic model is validated and the disk type underwater glider shows good maneuverability.