• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.144-155
• /
• 2003

본 논문에서는 객체 기술과 복잡한 구조적 데이터와 관련된 데이터베이스 구조를 효율적으로 표현하기 위한 통합 데이타 모델(UDM)이라고 하는 개념 데이터 모델을 제안한다. 이 모델은 E-R 모델, 의미 객체 모델, UML 등의 데이타 모델의 주요 기능을 데이타베이스 설계 관점에서 통합한 것이다. 이 모델은 시공간 멀티미디어 데이타의 복잡한 구조를 모델링하기 위해 제안된 객체-관계 모델을 단순화시키고 일부 기능을 확장시킨 버전이다. 이 모델은 현대적인 데이터베이스 응용의 주요한 의미적, 구조적인 정보의 표현을 지원하며, 관계, 객체-관계, 객체-지향, (반-)구조 데이터베이스 등 주요 논리적 데이터베이스 모델을 지원하도록 고안되었다. 데이터베이스 설계를 위한 도구로 통합 데이타 다이아그램(UDD)을 제안하며, 이 통합 데이타 모델로부터 논리적 뷰를 유도하기 위한 방법도 제안한다. 제안된 모델은 다양한 개념적 데이터베이스 설계를 위한 편리하고 실용적인 도구로 활용될 수 있다.

• Journal of Information Technology Applications and Management
• /
• 제21권4_spc호
• /
• pp.463-483
• /
• 2014

Data are dramatically increased and big data technology is spotlighted innovative technology among the latest information technologies. Organizations are interested in adoption of big data system to analyze various data format and to identify new business opportunity. The purpose of this study is to build a unified model for a system adoption through analysis of impact that affects behavioral intention and usage behavior of using big data. This study in addition to Technology-Organization-Environment (TOE), that is used the introduction of organizational studies, and Diffusion of Innovation (DOI) have implemented an extended unified model including the unified theory of acceptance and use of technology (UTAUT) that is usually used in personal level adoption study. The hypothesis was set up after implementing research model, and then got 411 effective survey data to target the member of organizations. As a result, all models (UTAUT, TOE, DOI) are affect to behavioral intention and usage behavior. It is verified that the suggested unified model was appropriate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.213-223
• /
• 2013

A unified channel thermal noise model valid in all operation regions is presented for short channel MOS transistors. It is based on smooth interpolation between weak and strong inversion models and consistent physical model including velocity saturation, channel length modulation, and carrier heating. From testing for noise benchmark and comparing with published noise data, it is shown that the proposed noise model could be useful in simulating the MOSFET channel thermal noise in all operation regions.

• 대한원격탐사학회지
• /
• 제34권6_1호
• /
• pp.1089-1100
• /
• 2018

본 논문에서는 국가기준점 자료를 활용한 고해상도 위성영상의 정밀센서모델 수립 가능성에 대하여 분석하였다. 이를 위해 국토지리정보원에서 운영하는 국토정보맵(http://map.ngii.go.kr/ms/map/NlipMap.do)으로부터 통합기준점 조서와 항공정사영상 자료를 이용하여 위성영상에서 통합기준점에 해당하는 영상좌표를 취득한 뒤, 이를 정밀센서모델 수립을 위한 관측자료로 활용하였다. 통합기준점 자료의 활용 가능성 분석을 위해 본 논문에서는 GNSS 측량을 통해 획득한 기준점을 활용한 정밀센서모델링 결과와 통합기준점만을 활용한 정밀센서모델링 결과를 비교하였다. 실험 결과 통합기준점만을 활용하였을 때 약 2 m의 3차원 위치결정이 가능함을 확인하였다.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.28-33
• /
• 2012

The smart grid, which is an integrated type of the power system and the digital network, requires the integration of a CIM(Common Information Model) standard for information modelling at the power control centers and an IEC 61850 standard for automation at the substation level in order to efficiently exchange the information between system elements. This paper describes the method of data transfer from one standard information model to the other standard unified information model by mapping between the objects of IEC 61850 and IEC61970 CIM standards both in the static and dynamic models, and designs the method of data transfer and information exchange between the topology processing application using unified topology class packages.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.253-261
• /
• 2005

In decades, a substantial body of work on a unified viscoplastic model which considers the mechanism of plastic deformation and creep deformation has developed. The systematic scheme for numerical analysis of unified model is necessary because the dominant failure mechanism is the defect growth and coalescence in materials. In the present study, the unified viscoplastic model for materials with defects suggested by Suquet and Michel was employed for numerical analysis. The constitutive equations are integrated based on the generalized mid-point rule and implemented into a finite element program (ABAQUS) by means of user-defined subroutine (UMAT). To evaluate the validity of the developed UMAT code and the assessment of the adopted viscoplastic model, the results obtained from the UMAT code was compared with the numerical reference solution and experimental data. The unit cell analysis also has been investigated to study the effect of strain rate, temperature, stress triaxiality and initial defect volume fraction on the growth and coalescence of the defect.

• 산경연구논집
• /
• 제8권7호
• /
• pp.39-49
• /
• 2017

Purpose - There are common factors both in Technology Readiness and Acceptance Model and Technology Paradox Theory which can be put together and made in one unified model. The unified model can provide the following merits. First, the unified model is simple but contains factors of the models. Second, the unified model can clarify the process of technology acceptance of common consumers. Third, the unified model can provide the opportunities to analyze the negative sides of new technology, thus find ways to improve the level of acceptance by general consumers. Research design, data, and methodology - The 450 questionnaires were handed out to people around Seoul and 421 were collected. Except insincere and wrong-marked ones, 402 were used to analyze. SPSS program was used to analyze. Factor analysis, regression analysis was conducted to test the hypotheses. Results - By analyzing sub-factors of both models and binding the common factors in one category, we accomplish one model. And we tested the model by empirical method. The results show that the results from the unified model are almost same as the results from the two models. In other words, the unified model works. Conclusions - Explaining one state of affair by two different method is in some sense distracting attention. By devising a new model including factors of both models, we can explain the affair more straightforward and efficiently. At first the technology acceptance model was devised to explain the technology users in an organization and the following tests and revised models were for the similar purposes. However, as on-lone activities including contracts have been expanded and become important, consumers as the technology uses have emerged as first factor to consider. In accordance models to explain this situation has been suggested. The model suggested in this research is one of the models but it has the following merits. That is, it is simple but has strong explanation power, it can clarify the process of technology acceptance of common consumers by containing negative sides of consumer conception, and thus, it can provide the opportunities to analyze the negative sides of new technology, also find ways to improve the level of acceptance by general consumers.

• 한국전자거래학회지
• /
• 제8권1호
• /
• pp.85-102
• /
• 2003

Nowadays an information exchange on XML such as B2B electronic commerce is spreading. Therefore the systematic and stable management mechanism for storing the exchanged information is needed. For this goal there are many research activities for connection between XML application and relational database. But because XML data have hierarchical structures and relational database can store only flat-structured data, we need to make the conversion rule which changes the hierarchical architecture to 2-dimensional information. Accordingly the modeling methodology for storing each structured information in relational database is needed. In this paper, we introduce a XML modeling methodology to design W3C XML schema using UML and we propose a unified design methodology for relational database schema to store XML data efficiently in relational databases. In the second place, in order to verify objectivity of a unified design methodology. By the way of Ronald Bourret, First we introduce the method of the transformation from XML schema to object model and second we translate object model into relational database schema. Therefore we show the mutual consistency between those consequence, and so can verify a unified design methodology.

• 대기
• /
• 제24권4호
• /
• pp.471-479
• /
• 2014

A road surface temperature prediction model (UM-Road) using input data of the Unified Model (UM) output and road physical properties is developed and verified with the use of the observed data at road weather information system. The UM outputs of air temperature, relative humidity, wind speed, downward shortwave radiation, net longwave radiation, precipitation and the road properties such as slope angles, albedo, thermal conductivity, heat capacity at maximum 7 depth are used. The net radiation is computed by a surface radiation energy balance, the ground heat flux at surface is estimated by a surface energy balance based on the Monin-Obukhov similarity, the ground heat transfer process is applied to predict the road surface temperature. If the observed road surface temperature exists, the simulated road surface temperature is corrected by mean bias during the last 24 hours. The developed UM-Road is verified using the observed data at road side for the period from 21 to 31 March 2013. It is found that the UM-Road simulates the diurnal trend and peak values of road surface temperature very well and the 50% (90%) of temperature difference lies within ${\pm}1.5^{\circ}C$ (${\pm}2.5^{\circ}C$) except for precipitation case.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1345-1360
• /
• 2016

In this paper, we propose a new real-time human detection under omni-directional cameras for visual surveillance purpose, based on CNN with unified detection and AGMM. Compared to CNN-based state-of-the-art object detection methods. YOLO model-based object detection method boasts of very fast object detection, but with less accuracy. The proposed method adapts the unified detecting CNN of YOLO model so as to be intensified by the additional foreground contextual information obtained from pre-stage AGMM. Increased computational time incurred by additional AGMM processing is compensated by speed-up gain obtained from utilizing 2-D input data consisting of grey-level image data and foreground context information instead of 3-D color input data. Through various experiments, it is shown that the proposed method performs better with respect to accuracy and more robust to environment changes than YOLO model-based human detection method, but with the similar processing speeds to that of YOLO model-based one. Thus, it can be successfully employed for embedded surveillance application.