• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.161-161
• /
• 2010

In order to achieve low power consumption and the uniform power spectrum of LED BLU (Back Light Unit) system, new circuits with a 2 stage L-C (Inductor-Capacitor) coupler have been proposed. From the simulation results based on our proposed model, the ripple power of the L-C regulation-embedded BLU circuit shows a dramatic reduction by more than 89.3% as compared to the normal BLU (without L-C circuits). This indicates that the proposed circuit is very promising for the realization of high-efficiency BLU circuits.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.381-391
• /
• 2022

Two-photon-polymerization additive-manufacturing systems feature high resolution and precision. However, there are few reports on specific methods and possible problems concerning the use of small lasers to independently build such platforms. In this paper, a femtosecond-laser two-photon-polymerization additive-manufacturing system containing an optical unit, control unit, monitoring unit, and testing unit is built using a miniature femtosecond laser, with a detailed building process and corresponding control software that is developed independently. This system has integrated functions of light-spot detection, interface searching, micro-/nanomanufacturing, and performance testing. In addition, possible problems in the processes of platform establishment, resin preparation, and actual polymerization for two-photon-polymerization additive manufacturing are explained specifically, and the causes of these problems analyzed. Moreover, the impacts of different power levels and scanning speeds on the degree of polymerization are compared, and the influence of the magnification of the object lens on the linewidth is analyzed in detail. A qualitative analysis model is established, and the concepts of the threshold broadening and focus narrowing effects are proposed, with their influences and cooperative relation discussed. Besides, a linear structure with micrometer accuracy is manufactured at the millimeter scale.

• 한국식품과학회지
• /
• 제25권4호
• /
• pp.366-372
• /
• 1993

본 연구는 미림 제조시 미림의 품질을 높이기 위한 방법의 하나로 세포 원형질체의 융합체 의해 ACPase 활성이 높은 균주를 얻으려고 시도하였다. 돌연변이 방법으로 acid carboxypeptidase(ACPase) 활성이 높은 A. oryzae 9-12와 A. shirousamii IFO 6082-60을 선별하여 사용하였다. A. oryzae 9-12와 A. shirousamii IFO 608260의 원형질체의 형성조건은 chitinase (10mg/ml), cellulase(10mg/ml) 및 zymolase(20T(5mg/ml)등의 효소 혼합용액에서 $30^{\circ}C$에서 4시간 반응시켰을 때 가장 높았으며, pH6.0일 때, 안정제로서는 0.6M KCl 및 무기 염류로서는 0.01M $CaCl_2\;2H_2O$가 가장 높았고, 30% PEG 6,000이 가장 좋았다. 이때의 융합빈도는 0.71%였다. 융합주의 ACPase의 활성은 F-50이 20,800unit/g으로 변이주보다 1.4배 높았다.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.847-851
• /
• 2006

본 논문에서는 레이더와 전자정보 장비를 사용해서 획득한 각각의 정보를 종합해서 레이더에서 획득한 표적신호와 전자정보에서 획득한 전자파 정보를 융합하는 기술을 제시한다. 레이더와 전자정보 장비를 융합하면 표적을 정확하게 확인할 수 있기 때문에 레이더의 탐지 오차율이 줄어들고 표적에 대한 상세 정보를 확보할 수 있으며, 정보융합 모듈에서 융합한 내용을 종합표시기에서 통합된 정보를 표시할 때 장비의 성능을 향상시킬 수 있으며 표적식별이나 목표물 선정에 사용할 수 있다.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.359-364
• /
• 2003

In this paper, we present multi-sensor data fusion for telematics application. Successful telematics can be realized through the integration of navigation and spatial information. The well-determined acquisition of vehicle's position plays a vital role in application service. The development of GPS is used to provide the navigation data, but the performance is limited in areas where poor satellite visibility environment exists. Hence, multi-sensor fusion including IMU (Inertial Measurement Unit), GPS(Global Positioning System), and DMI (Distance Measurement Indicator) is required to provide the vehicle's position to service provider and driver behind the wheel. The multi-sensor fusion is implemented via algorithm based on Kalman filtering technique. Navigation accuracy can be enhanced using this filtering approach. For the verification of fusion approach, land vehicle test was performed and the results were discussed. Results showed that the horizontal position errors were suppressed around 1 meter level accuracy under simulated non-GPS availability environment. Under normal GPS environment, the horizontal position errors were under 40㎝ in curve trajectory and 27㎝ in linear trajectory, which are definitely depending on vehicular dynamics.

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.281-285
• /
• 2006

Microbial fuel cells (MFC) stacked with bipolar plates have been constructed and their performance was tested. In this design, single fuel cell unit was connected in series by bipolar plates where an anode and a cathode were made in one graphite block. Two types of bipolar plate stacked MFCs were constructed. Both utilized the same glucose oxidation reaction catalyzed by Gram negative bacteria, Proteus vulgaris as a biocatalyst in an anodic compartment, but two different cathodic reactions were employed: One with ferricyanide reduction and the other with oxygen reduction reactions. In both cases, the total voltage was the mathematical sum of individual fuel cells and no degradation in performance was found. Electricity from these MFCs was stored in a supercapacitor to drive external loads such as a motor and electric bulb.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권11호
• /
• pp.5546-5559
• /
• 2019

Facial action units (AUs) have recently drawn increased attention because they can be used to recognize facial expressions. A variety of methods have been designed for frontal-view AU detection, but few have been able to handle multi-view face images. In this paper we propose a method for multi-view facial AU detection using a fused multilayer, multi-task, and multi-label deep learning network. The network can complete two tasks: AU detection and facial view detection. AU detection is a multi-label problem and facial view detection is a single-label problem. A residual network and multilayer fusion are applied to obtain more representative features. Our method is effective and performs well. The F1 score on FERA 2017 is 13.1% higher than the baseline. The facial view recognition accuracy is 0.991. This shows that our multi-task, multi-label model could achieve good performance on the two tasks.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6022-6026
• /
• 2012

본 논문은 마이크로스트립 전송선로에 삽입된 주파수 선택 표면(FSSs)을 사용하여 주기적인 구조를 갖는 대역저지필터(BSF)에 관한 것이다. 제안된 대역저지필터는 변형된 크로스 루프 슬롯 (Cross-loop slot)을 단위 셀로 하여 주기적인 구조로 설계하였으며, 설계된 대역 저지 필터는 등가회로 모델과 분산 도표(dispersion diagram)로 해석하였다. 대역 저지 필터의 중심주파수(fo)는 6.6 GHz이다. 제안된 필터는 단위 셀의 개수가 증가하면 3dB 대역폭은 넓어지고 삽입손실은 줄어드는 특성이 있다. 또한 제안한 대역저지필터는 소형의 평면구조를 가지며, 한 번의 에칭으로 제작이 가능 하여 다양한 분야의 RF 필터로서 사용 가능성이 높다.

• 한국항행학회논문지
• /
• 제17권2호
• /
• pp.240-246
• /
• 2013

본 연구는 터치스크린 방식의 정보전달 기기인 DID 시스템에 Airtouch 기술을 융합하여 새로운 방식의 정보전달 시스템을 개발하는 것이다. 대학의 학내 공지사항, 교육정보 및 취업정보 등을 열람하고 활용 할 수 있는 시스템을 설계하고 Airtouch 기술을 구현하여 원격조작 및 공유 콘텐츠 스토어, 클라우드 서비스 개발을 통한 콘텐츠 동기화 기술 구현으로 스마트융합 DID 시스템을 개발하고자 한다. 키넥트는 USB 인터페이스를 가지고 있기 때문에 정보기기와 연결하여 사용 할 수 있으며, 저렴한 가격의 제품으로 키넥트 센서를 활용하여 Airtouch 기술을 구현한다. 논문에서는 유형의 입력장치 없이 사용자의 손동작만으로 정보기기와 상호작용이 가능한 시스템인 Airtouch 기술을 활용한 스마트융합 DID 시스템을 개발하여 사용자의 손 움직임을 추적하여 이를 바탕으로 마우스 포인터를 조작할 수 있고, 사용자의 손동작을 통해 정보기기에 명령을 내릴 수 있도록 하였다. Airtouch 기술을 활용한 스마트융합 DID 시스템 기술 활용으로 온라인 교육산업, 광고홍보, 정보화 산업 등 여타 산업에 파급효과를 증대시킨다. 또한, 폭넓은 범용성을 가지고 기존의 인터페이스 장치들을 대체기술 활용성이 무한 확장이 가능하다.

• 동아시아식생활학회지
• /
• 제5권1호
• /
• pp.93-99
• /
• 1995

For the improvement of the L-lysine productivity of Brevibacterium flavum and Corynebacterium glutamicum, fusants were induced by interspecific protoplast fusion of Bacillus subtilis with C. glutamicum and B. flavum. The following results were obtained through protoplast formation of strains condition of protoplast fusion, characteristics of the fusants, and the productivity of lysine form starch. B. flavum BF-5 and C. glutamicum protoplasts were made by the treatment of 0.3unit/$m\ell$ of penicillin G at the early stationary growth phase for 2 hours followed by incubation with 10mg/$m\ell$ of lysozyme at 37$^{\circ}C$ for 120 min. When a mixture of the protoplast was treated with 30% PEG(M.W.6,000) solution containing 50mM CaCl2 at optimal conditions, the intergeneric fusion frequency between protoplasts of C. glutamicum CG-2 and B. subtilis BD 224 was 7.1${\times}$105. The genetic properties on the L-lysine producing fusants were compared with those of parental strains. As a results, the intergeneric fusants were completed in each auxotrophic requirement, resistances for S-(2-amino-ethyl)-L-cysteine and kanamycine were confirmed. And one of fusants selected, FBB-41 were found to be genetically stable fusants. The aspartokinase activity of FBB-41 strain increased than that of the parent strain.