• Title/Summary/Keyword: Unit-cell

Search Result 2,083, Processing Time 0.023 seconds

Analysis and Design of Low Pass Filter using Unit Cell based on CRLH Transmission Line

  • Yang, Lei;Yang, Doo-Yeong
    • International Journal of Contents
    • /
    • v.8 no.3
    • /
    • pp.100-104
    • /
    • 2012
  • In this paper, a unit cell for low pass filter design by using composite right and left-handed transmission line in conductor-backed coplanar waveguide is proposed. The characteristics of the unit cell are analyzed in order to design a low pass filter in small sizes. By changing the sizes of the unit cell, the parameters of right-handed and left-handed immittance components are changed and the desired characteristics of the unit cell are achieved. The equivalent circuit of the unit cell is extracted and analyzed either. As a result, the simulation results of the unit cell and the equivalent circuit are almost identified. The movement and energy distributions of electromagnetic field are shown to confirm the property of the unit cell. In the end, a low pass filter is demonstrated by cascading three proposed unit cells, which shows cutoff frequency of 1.53GHz and deep attenuation from 2.23GHz to 4.49GHz lower than -50dB.

Fabrication Characteristics and Performance Evaluation of a Large Unit Cell for Solid Oxide Fuel Cell (고체산화물연료전지용 대면적 단위전지 제조특성 및 성능평가)

  • Shin, Y.C.;Kim, Y.M.;Oh, I.H.;Kim, H.S.;Lee, M.S.;Hyun, S.H.
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2008.05a
    • /
    • pp.13-16
    • /
    • 2008
  • Solid oxide fuel cell(SOFC) is an electrochemical energy conversion system with high efficiency and low-emission of pollution. In order to reduce the operating temperature of SOFC system under $800^{\circ}C$, the thickness reduction of YSZ electrolyte to be as thin as possible, e.g., less than 10 ${\mu}m$ are considered with the microstructure control and optimum design of unit cell. Methods for reducing the thickness of YSZ electrolyte have been investigated in coin cell. Moreover, a large unit cell($8cm{\times}8cm$) for SOFC was fabricated using an anode-supported electrolyte assembly with a thinner electrolyte layer, which was prepared by a tape casting method with a co-sintering technique. we studied the design factors such as active layer, electrolyte thickness, cathode composition, etc,. by the coin type of unit cell ahead of the fabrication process of a large unit cell and also reviewed about the evaluation technique of a large size unit cell such as interconnect design, sealing materials and current collector and so forth. Electrochemical evaluations of the unit cells, including measurements such as power density and impedance, were performed and analyzed. Maximum power density and polarization impedance of coin cell were 0.34W/$cm^2$ and $0.45{\Omega}cm^2$ at $800^{\circ}C$, respectively. However, Maxium power density of a large unit cell($5cm{\times}5cm$) decreased to 0.21W/$cm^2$ at $800^{\circ}C$ due to the increase of ohmic resistance. However, It was found that the potential value of a large unit cell loaded by 0.22A/$cm^2$ showed 0.76V at 100hrs without the degradation of unit cell.

  • PDF

Growth and dielectric Properties or $BaTiO_3/SrTiO_3$ oxide artificial superlattice deposited by pulsed laser deposition (PLD) (Pulsed laser depostion (PLD)법으로 증착된 $BaTiO_3/SrTiO_3$ 산화물 초격자의 성장 및 유전특성)

  • 김주호;김이준;정동근;김용성;이재찬
    • Journal of the Korean Vacuum Society
    • /
    • v.11 no.3
    • /
    • pp.166-170
    • /
    • 2002
  • Artificial $BaTiO_3$(BTO)/$SrTiO_3$(STO) oxide superlattice have been deposited on MgO (100) single crystal substrate by pulsed laser deposition(PLD) method. The stacking periodicity of BTO/STO superlattice structure was varied from $BTO_{1\;unit\; cell}/STO_{1\;unit\; cell}$ to $BTO_{125\;unit\; cell}/STO_{125 \;unit \;cell}$ thickness with the total thickness of 100 nm. The result of X-ray diffraction showed the characteristics of superlattice in the BTO/STO multilayer structure. we have also confirmed that there was no interdiffusion at the interface between BTO and STO layers by high resolution transmission electron microscopy(HRTEM). The dielectric constant of superlattice increased with decreasing stacking periodicity of the BTO/STO superlattice within the critical thickness. The dielectric constant of the BTO/STO superlattice reached a maximum i.e., 1230 at a stacking perioicity of $BTO_{2\;unit\; cell}/STO_{2\;unit\; cell}$ .