• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.193-193
• /
• 2000

This paper proposes a dynamic observer that is applicable to linear time-invariant systems subject to unknown input, The proposed method utilities Che output feedback control structure to design unknown input observer. We name it as the dynamic unknown input observer(UIO). The dynamic UIO can be designed easily over the usual static UIO, and the system response could be improved.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.284-290
• /
• 2013

위성의 각속도를 추정하고 반작용 휠의 고장을 검출하기 위하여 비선형 미지입력 관측기를 제안하였다. 위성의 각속도 추정을 위해서 입력 값을 필요로 하는데, 구동기에 고장이 발생하는 경우에 정확한 각속도 추정이 어렵다. 미지입력 관측기는 미지의 고장에 영향을 받지 않으면서 상태추정이 가능하다. 본 논문에서는 SDRE 기법을 적용하여 비선형 미지입력 관측기를 설계하였고, 시뮬레이션을 이용하여 제안한 방법을 검증하였다. 다양한 형태로 동시에 고장이 발생하더라도, 각속도 추정 및 고장 검출이 가능하였다.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1138-1144
• /
• 2011

This article deals with the problem of fault detection of a spacecraft's actuators. The authors introduce an extended unknown input observer for nonlinear systems. This is an extended form of unknown input observers which are used for linear systems. Since faults are not available, those are considered as unknown inputs. Unknown input observers can estimate states without full information of inputs if some conditions are satisfied. The authors suggest a continuous-time extended UIO (eUIO) and prove the convergence of state estimation errors. Since the dynamic equation of a spacecraft is nonlinear, an extended UIO can be applied. Three eUIOs are designed to monitor three reaction wheels. The moving averages of each eUIO's residuals are selected for decision logic. The proposed method is verified by numerical simulations.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.77-82
• /
• 2001

This paper deals with a fault detection algorithm for linear descriptor systems via unknown input PI observer. An unknown input PI observer is presented and its realization conditions is proposed by using the rank condition of system matrices. From the characteristics of unknown input PI observer, the states of system with unknown inputs are estimated and the occurrences of fault are detected, and its magnitudes are estimated easily by using integrated output estimation error under the step faults. Finally, a numerical example is given to verify the effectiveness of the proposed fault detection algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.452-452
• /
• 2000

This paper deals with a fault detection algorithm for linear descriptor systems via unknown input PI observer. An unknown input PI observer is presented and its realization conditions is proposed by using the rank condition of system matrices. From the characteristics of unknown input PI observer, the states of system with unknown inputs are estimated and the magnitude of failures are detected and isolated easily by using integrated output error under the step failures. Finally, a numerical example is given to verify the effectiveness of the proposed algorithm.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.170-174
• /
• 2014

In this paper, an unknown input estimation method via the optimal FIR smoother is proposed for linear discrete-time systems. The unknown inputs are represented by random walk processes and treated as auxiliary states in augmented state space models. In order to estimate augmented states which include unknown inputs, the optimal FIR smoother is applied to the augmented state space model. Since the optimal FIR smoother is unbiased and independent of any a priori information of the augmented state, the estimates of each unknown input are independent of the initial state and of other unknown inputs. Moreover, the proposed method can be applied to stochastic singular systems, since the optimal FIR smoother is derived without the assumption that the system matrix is nonsingular. A numerical example is given to show the performance of the proposed estimation method.

• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.117-121
• /
• 2005

This paper deals with the state estimation of linear time-invariant discrete systems with unknown inputs. The forward sequences of the output are treated as additional outputs. In this case, the rank condition for designing the unknown input estimator is relaxed. The gain for minimal estimation error variance is presented, and a numerical example is given to verify the proposed unknown input estimator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.95-98
• /
• 1995

In this paper, an unknown-input proportional integral (PI) observer is presented and its applicability to the design of exact loop transfer recovery (Exact LTR) is shown. First, a sufficient condition for the PI observer to estimate the states of systems without knowledge of unknown input is derived. A simple existence condition of the observer is given. Under the conditions, the Exact LTR with specified observer's poles is achieved by the unknown-input PI observer.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권2호
• /
• pp.140-146
• /
• 2016

This paper proposes a control method of the Segway with unknown control coefficient and input saturation. To design a simple controller for the Segway with the model uncertainty, the prescribed performance function is used. Furthermore, an auxiliary variable is introduced to deal with unknown time-varying control coefficient and input saturation problem. Due to the auxiliary variable, function approximators are not used in this paper although all model uncertainties are unknown. Thus, the controller can be simple. From the Lyapunov stability theory, it is proved that all errors of the proposed control system remain within the prescribed performance bounds. Finally, the simulation results are presented to demonstrate the performance of the proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3243-3257
• /
• 2021

Deep neural networks provide excellent performance in pattern recognition, audio classification, and image recognition. It is important that they accurately recognize input data, particularly when they are used in autonomous vehicles or for medical services. In this study, we propose a data correction method for increasing the accuracy of an unknown classifier by modifying the input data without changing the classifier. This method modifies the input data slightly so that the unknown classifier will correctly recognize the input data. It is an ensemble method that has the characteristic of transferability to an unknown classifier by generating corrected data that are correctly recognized by several classifiers that are known in advance. We tested our method using MNIST and CIFAR-10 as experimental data. The experimental results exhibit that the accuracy of the unknown classifier is a 100% correct recognition rate owing to the data correction generated by the proposed method, which minimizes data distortion to maintain the data's recognizability by humans.