• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2584-2589
• /
• 2015

In this paper, we want to able to reduce the time effectively about the analysis of protocol and development of protocol converter in industrial network. For this purpose, we developed the user protocol converter that can be to analysing the communication protocol in the industrial network. and also that is able to converting to user protocol and transmitting to another network. The developed user protocol converter was consist of S/W and H/W, and is supporting the Modbus, the NMEA0183 and the ethernet. The hardware main processor was used the AVR128, and placed the serial communication part and the ethernet part in converter board. The experiment results, we acquired very high transmission rate and conversion rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.90-92
• /
• 2015

This study aim is to effectively reduce the time that was required for the analysis on an existing communication protocol with the industrial monitoring equipment. We analyzed the collected data with the Modbus protocol and NMEA0183, which is widely used in industrial monitoring. and User will be easy converting to data for use on each devices. The main board of the protocol converter was used AVR128, and RS232C and Ethernet was configured to enable communication.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.2
• /
• pp.106-115
• /
• 2013

LED lighting control system using unidirectional DMX512 (digital multiplex with 512 pieces of information)) protocol has been the most popular. Nowadays, the user's consumption has been upgrading to the more intelligent system but the upgrading process does not affect the existing infrastructure. There were many researches use the additional communication for the feedback communication way such as WiFi, Controller Area Network (CAN), Power Line Communication (PLC), etc but all researches had inherent disadvantages that created the independent feedback with the existing DMX512 system. Our paper represents the novel method that uses the remote device management (RDM) protocol to associate the additional feedback with existent DMX512 infrastructure in the one system. The data in DMX512 frame sending to the DMX512 client is split and repacked to become the RDM packet. This RDM packet is transferred to the RDM monitor console and the response RDM packet is converted to the DMX512 frame for control DMX512 client devices. This is the closed loop control model which uses the bidirectional convertibility between RDM packet and DMX512 frame. The proposed method not only upgrades the feedback control function for the old DMX512 system without changing the existent infrastructure, but also solves compatible problems between new RDM devices and old DMX512 devices and gives the low cost solution for extending DMX512 universe.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1436-1445
• /
• 2008

Currently, mobile handset embeds many communication modules including CDMA and Bluetooth, and many applications are developed based on these modules. In this paper, we study about wireless vehicle diagnosis software and user interface based on bluetooth system on mobile handset. We developed Bluetooth communication system on protocol converter between OBD(On Board Diagnostics)-II system. Based on this system, we can communicate ECU(Engine Control Unit) and mobile device based on windows .NET compact framework platform. Therefore we can easily diagnose vehicle state and obtain engine data. All user interface and vehicle diagnosis systems on mobile handset are developed under windows .NET compact framework platform. Using this system we achieved several improvements over existing vehicle diagnostic system; 1) the software download and upgrade can be achieve on wireless environment, 2) no additional diagnostic devices are requires, which saves additional cost and we can diagnose the vehicle easily, 3) we can easily port our system on many embedded systems including PDA and navigator, etc.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.288-294
• /
• 2011

In this paper, the FPGA-based SoC board (Xilinx Virtex-4 ML401 EVM) is adopted to control electrical power inverter system. For marine application, its performance is shown on PC-based system for monitoring electrical characteristics of a power inverter using by the NMEA 2000 protocol. This power inverter system is achieved in Real-Time monitoring and control by dual micro-processor operation on embedded FPGA-based SoC board. One micro processor is for control (Control processor) electrical power inverter using by PWM signal. And the other microprocessor (Communication processor) is for communication with PC-based monitoring system. The two-processor is communicating each other using by dual-port ram (DPRAM). PC-based system user can control and monitor information of the electrical power inverter via NMEA 2000 based communication processor. Control and monitoring information includes the inverter status and configuration. SoC board converts this information to Parameter Group Numbers (PGNs) in the NMEA 2000 protocol. This system can be applied to marine power electronics for distributed power generation, transmission or regulation systems on the ship.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3603-3612
• /
• 2000

This paper presents is for the design and implementation of EDI document exchange system based on XML To create a customized document of the users' choice, it designed and created the transaction processor and the template manager, and to make it accessable with the original EDI, a converter function is included, Also, on this system, this protocol stores EDI message structure that needed to exchange as XML format and controls it as DOM API for user can use previous system, And provides interface for user can create template files with converter and transfer necessary elements that can be chosen by user. For this purpose, This system proposes a shows structure information and document converting mechanism solution of EDI documents based on by using XML which does not show proper document conversion mechanism solution in other system so far.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.317-322
• /
• 2015

Recently, due to the variety and complexity of marine electronics communication devices, much research has been done to adopt the novel communication protocol. Among them, NMEA2000 protocol, is adopted as standardized protocol to the next generation ship. In this paper, we design and implement the conversion algorithm for sensor protocol based on NMEA2000, and analog data module which convert data format between NMEA2000, CAN, Ethernet, RS232. The present study was designed to implement user-based data monitoring system by supporting various communication protocols through the development and application of key technologies through NMEA2000.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.39-44
• /
• 2018

In this paper, we propose a monitoring method of smartphone to integrate IoT technology to monitor the state of the vehicle for fault diagnosis of E-Mobility power converter. In China, EV regulations are being implemented to promote technological development and market changes in electric vehicles. To meet this trend, E-Mobility should study suitable monitoring technology. The OBD-II method used in existing automobiles is a wired / wireless communication method. In order to apply it to E-Mobility, additional interface and communication link are required. In this paper, we propose a technology to monitor the status information of power converter for E-Mobility by combining existing technology with IoT. This technology simplifies the existing network protocol and hardware interface, and confirms that the E-Mobility power converter and smartphone can be interworked for easy user monitoring. And we have done research to make high value product design from the aspect of function.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.45-46
• /
• 2007

In order to go digital broadcasting in Korea, it is conducted various policies in the country which be expanded network, be increased digital broadcasting hours. And broadcasting stations in the country close down analog broadcasting until 2012. Moreover IPTV is a method of delivering broadcast television and on-demand, rich media content that uses an IP(Internet protocol network) as the medium. And an IP is regarded as a very favorable approach for the future "Medium for Digital TV". However It is not easy to replace the entire digital infrastructure. And there are some problems in the digital infrastructure for Digital TV(i.e. channel zapping delay). Moreover user require service. IPMG is to solve these problems. IPMG is digital converter that allows receive and transmit signal by using many kinds of medium for Digital TV. Moreover IPMG provides users a Network PVR service. In this paper we developing, manufacturing IPMG and analyze its performance.