• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.61-69
• /
• 2019

Poly(ethylene-co-vinyl acetate) (EVA) is a copolymer of ethylene and vinyl acetate (VA). It is important to determine the VA content of EVA, since the properties of EVA depend highly on the VA content. EVA copolymers have been used in a wide range of applications appropriate for the different VA contents. IR, NMR, and TGA are generally used for determination of the VA content of EVA copolymers. Of these, TGA is the most reliable method and can be applied to cured EVAs. Analytical methods for determination of the VA content and properties of EVA copolymers via TGA were herein reviewed. Thermal behaviors of EVA copolymers (glass transition temperature ($T_g$), melting point ($T_m$), and crystallization temperature ($T_c$)) determined by DSC were also reviewed. Analysis of the related literature revealed that the $T_g$, $T_m$, and $T_c$ decrease by about 0.46, 1.36, and $2.08^{\circ}C$, respectively, for every 1 wt% in VA content. A method for determining the degree of crosslinking of cured EVA copolymers was also reviewed, and the degree of crosslinking tends to increase with the decrease in the VA content.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.243-252
• /
• 2005

The effect of the vinyl acetate (VA) content on the thermal, viscoelastic, rheological, morphological and mechanical behaviors in various blends of ethylene-vinyl acetate (EVA)/ethylene-$\alpha$-olefin copolymers was investigated using 28, 22 and $15 mol\%$ of VA in EVA. In the DSC melting and crystallization thermograms of all of the EVA systems blended with ethylene-$\alpha$-olefin copolymers, discrete peaks were observed which were related to the constituents. In the dynamic mechanical thermal analysis, the storage modulus increased with increasing content of ethylene-$\alpha$-olefin copolymers. In addition, the transition regions relating to the tan bpeaks varied with the VA content. The crossover point between G' and G" varied depending on the VA contents, and shear-thinning was more prominent in the EVA/EtBC system. In the SEM investigation, a discrete phase morphology was observed in both the EVA/EtBC and EVA/EtOC blends, but the contrast improved with decreasing VA content. However, the tensile strength and modulus improved, but the elongation at break reduced with decreasing VA content, implying that the ethylene-$\alpha$-olefin copolymers play the role of reinforcing materials. Thus, the EVA and ethylene-$\alpha$-olefin components in the copolymers are immiscible in the molten and solid states, but are nevertheless mechanically compatible.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1303-1313
• /
• 2011

This study was conducted to provide the basic information to allow improved scientific assessment of velvet antler's quality by investigating the change of chemical composition during different antler growth stages in elk (Cervus elaphus canadensis). Twenty four antlers were harvested from elk stags (aged 4-5 years) on 65 days (VA65), 80 days (VA80) and 95 days (VA95) after button casting, and the chemical composition of each antler was determined in five sections (top, upper, middle, base, and bottom). Crude protein and ether extract content was the highest in the top section, whereas ash content was the highest in the bottom section in all groups (p<0.05). Glycosaminoglycan (GAG) content was higher in the VA65 group than in the VA95 group in the upper section of antler (p<0.05). The collagen content was higher in the VA65 group compared to the VA95 group in the middle and bottom sections (p<0.05), and increased downward from the top to the bottom section. The proportions of certain amino acids, including aspartic acid, glutamic acid and isoleucine were higher (p<0.05), whereas proline and glycine were lower in the top section of antler compared to all other sections (p<0.05). The proportion of linoleic acid, 11,14,17-eicosatrienoic acid, total ${\omega}$-3 and ${\omega}$-6 fatty acids and polyunsaturated fatty acids (PUFAs) for all sections in the VA65 group was higher than in the VA95 group (p<0.05). These results suggested that the quality of velvet antler is strongly influenced by antler development stage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.9
• /
• pp.1463-1469
• /
• 2020

Objective: The effects of maternal and offspring dietary vitamin A (VA) supplementation on early body weight, digestive tract function and immune function in goslings were studied. Methods: Yangzhou geese (180 d old) were randomly divided into 5 experimental groups of 15 females and 3 males (the males were kept until slaughter). Eggs were collected for hatching during the peak laying period. A total of 96 goslings were selected from each treatment group (each fed a basic diet supplemented with 0, 4,000, 8,000, 12,000 or 16,000 IU/kg VA) and randomly divided into 2 groups, with 6 replicates in each group and 8 goslings in each replicate. The gosling diet was supplemented with 0 or 9,000 IU/kg VA. Results: i) Villus length, villus width and the muscle thickness of the duodenum, jejunum and ileum were increased and the crypt depth was reduced after adding 12,000 IU/kg VA to the goslings' diet (p<0.05). Adding 9,000 IU/kg VA to the offspring diet increased the length of the duodenal villi and width of the ileum and decreased the crypt depth of the ileum (p<0.05). ii) Supplementing the maternal diet with 12,000 IU/kg VA increased immune organ weight, the immune organ index and immunoglobulin content in goslings (p<0.05). The bursa weight and immunoglobulin G content of offspring were higher in the 9,000 IU/kg VA supplementation group than in the group with no supplementation (p<0.05). Conclusion: Offspring growth and development were affected by the amount of VA added into maternal diet. The negative effect of maternal VA deficiency on offspring can be compensated by adding VA to the offspring diet. Continued VA supplementation in the offspring diet after excessive VA supplementation in the maternal diet is unfavorable for gosling growth and development.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1116-1123
• /
• 2020

Velvet antler (VA) is a historically traditional medicinal supplement and is well known in Asian countries for its pharmaceutical and health benefits. The objectives for this study were to optimize the hot water extraction (HWE) of VA for the Korean VA industry, and to determine the most effective pretreatment method among microwave (MW), ultrasonication (US), and enzymatic (EZ) techniques. Using response surface methodology, optimum extraction temperatures and times were determined by central composite design configuration based on extraction yield and sialic acid content. Various quality parameters of VA extract including yield, soluble solid, protein, and sialic acid contents were also compared with the conjunction of HWE and pretreatment. The yield and sialic acid content of VA extract were determined to be 40% and 0.73 mg/g, respectively, under an optimum temperature of 100℃ at 24 h of extraction time. The yields from VA extracts pretreated with MW, US, and EZ were 17.42%, 19.73%, and 29.15%, respectively. Among the tested commercial enzymes, pepsin was the most effective proteolytic enzyme and led to the highest yield (47.65%), soluble solids (4.03 °brix), protein (1.12 mg/ml), and sialic acid (3.04 mg/ml) contents from VA extract.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.7-10
• /
• 1984

Mulberry Seedlings germinated and grown under green house conditions were inoculated with Glomus mosseae, Mosse and Trappe (a Kind of Vesicular arbuscular mycorrhizae) prior to outplanting into unsterilized soil. They were grown on phosphate deficient soil for 6 months after planting. Shoot length, stem diameter and leaf yield of the inoculated plants were found to be significantly greater than uninoculated ones. It was observed in foliar mineral content that the levels of N, P$_2$O$\sub$5/, CaO of the inoculated plants were higher but the level of MgO of the inoculated plants was lower than the uninoculated ones. In the mineral content of roots, it was observed that the level of P$_2$O$\sub$5/ was higher but the level of N was lower significantly in the inoculated plants than the uninoculated ones.

• Macromolecular Research
• /
• v.16 no.4
• /
• pp.329-336
• /
• 2008

Core/shell ($\pm$)PS/(-)silica nanocomposite particles were synthesized by dispersion polymerization using an amphoteric initiator, 2,2'-azobis [N-(2-carboxyethyl)-2,2-methylpropionamidine] ($HOOC(CH_2)_2HN$(HN=) $C(CH_3)_2CN$=NC $(CH_3)_2C$(=NH)NH $(CH_2)_2COOH$), VA-057. Negatively charged (-6.9 mV) silica was used as the stabilizer. The effects of silica addition time and silica and initiator concentrations were investigated in terms of polymerization kinetics, ultimate particle morphology, and size/size distribution. Uniform hybrid microspheres with a well-defined, core-shell structure were obtained at the following conditions: silica content = 10-15 wt% to styrene, VA-057 content=above 2 wt% to styrene and silica addition time=0 min after initiation. The delay in silica addition time retarded the polymerization kinetics and broadened the particle size distribution. The rate of polymerization was strongly affected by the silica content: it increased up to 15 wt% silica but then decreased with further increase in silica content. However, the particle size was only marginally influenced by the silica content. The zeta potential of the composite particles slightly decreased with increasing silica content. With increasing VA-057 concentration, the PS microspheres were entirely coated with silica sol above 1.0 wt% initiator.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.307-313
• /
• 2014

The physical properties of functionalized graphene sheet (FGS)/poly(ethylene-co-vinyl acetate) (EVA) was examined with various kinds of EVA, having vinyl acetate (VA) contents in the range of 0 to 40 wt%. The compatibility between FGS and EVA was enhanced as the polar VA content of EVA increased. Thus, the dispersion of FGS in EVA became finer, and the decrease of surface resistivity and the increase of tensile modulus by the added FGS became more effective when the VA content of EVA was high. When the VA content was low, the elongation at break was reduced drastically by added FGS due to the poor adhesion of FGS/EVA interface. The crystallization of EVA was generally retarded by the interaction with dispersed FGS. However, when both the VA content of EVA and the added amount of FGS were low, the crystallization of EVA was enhanced, probably due to the predominant nucleating effect by FGS.

• Elastomers and Composites
• /
• v.56 no.2
• /
• pp.92-99
• /
• 2021

Microstructure-dependent changes in the crystalline properties of poly(ethylene-co-vinyl acetate) (EVA) was investigated using various EVAs at different VA contents via X-ray diffraction (XRD). The parameters analyzed herein were percentage crystallinity (X_c), interplanar crystal spacing (d_hkl), crystal stack size (D_hkl), and the number of crystal plane piles (N_hkl). The X_cs of [110] and [200] crystals were 21.0-4.1 and 6.7-1.4%, respectively, and they decreased by approximately 2.3 and 0.7% for every mol% of the VA content, respectively. The X_c ratios of the [110] and [200] crystals were approximately 3. The d₁₁₀s and d₂₀₀s values were 0.41-0.42 and 0.37-0.38 nm, respectively. The D₁₁₀s and D₂₀₀s values were 9.56 -21.92 and 7.00-16.42 nm, respectively. The d_hkls increased with an increase in the VA content, whereas the D_hkls decreased. The N₁₁₀s and N₂₀₀s were 22.7-51.3 and 18.3-43.2, respectively, and they decreased by increasing the VA content. EVA with the same VA content showed different crystalline properties as per the suppliers, and some EVAs deviated from the average trends. This could be explained by the difference in their microstructures such as the sizes and distribution uniformity of the ethylene sequences in EVA chains.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.41-42
• /
• 2011

In this study, VA/E/MMA-modified mortars with nitrite-type hydrocalumite were prepared with various calumite contents and polymer binder-ratios, and tested for chloride ion penetration, carbonation and drying shrinkage. As a result, the chloride ion penetration and carbonation depths were somewhat increased with calumite contents, but those were remarkably decreased depending on the polymer-binder ratios. The 28-d drying shrinkage showed a tendency to increase with polymer-binder ratios and calumite contents. VA/E/MMA-Modified mortars with a calumite of 10 % were dissatisfied with KS requirements. Accordingly, a calumite content of 5 % for the VA/E/MMA-modified mortars with calumite is recommended.